Resumen del contenido incluido en la página 1
HD CAMCORDER
HDW-F900
Sony Corporation
Communication System Solutions Network
Company
Printed in Japan
2000.08.13
©2000
OPERATION MANUAL [English]
HDW-F900 (UCJ/SY)
3-203-941-02 (1) 1st Edition (Revised 1)
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. For the customers in U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This e
Resumen del contenido incluido en la página 4
For the customers in Europe This product with the CE marking complies with the EMC Directive (89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: • EN55103-1: Electromagnetic Interference (Emission) • EN55103-2: Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban
Resumen del contenido incluido en la página 5
Für Kunden in Europa Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Direktive (89/336/EEC) der EG-Kommission. Die Erfüllung dieser Direktive bedeutet Konformität für die folgenden Europäischen Normen: • EN55103-1: Elektromagnetische Interferenz (Emission) • EN55103-2: Elektromagnetische Empfindlichkeit (Immunität) Dieses Produkt ist für den Einsatz unter folgenden elektromagnetischen Bedingungen ausgelegt: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem Maße industrielle
Resumen del contenido incluido en la página 6
Table of Contents Chapter 1 Overview 1-1 Features ..................................................................................... 1-1 1-1-1 Camera Features ............................................................... 1-1 1-1-2 VTR Features .................................................................... 1-4 1-2 Example of System Configuration .......................................... 1-6 1-3 Precautions ...............................................................................
Resumen del contenido incluido en la página 7
3-3-2 Checking the Recording on the Color Video Monitor — Playback in Color .......................................................... 3-14 3-4 Tele-File ................................................................................... 3-15 Chapter 4 Adjustments and Settings for Recording 4-1 Adjusting the Black Balance and the White Balance ............ 4-1 4-1-1 Adjusting the Black Balance ........................................... 4-2 4-1-2 Adjusting the White Balance .....................
Resumen del contenido incluido en la página 8
4-7-9 Saving or Reading Setup Data to or from the Memory Stick 4-60 4-7-10 Selecting the Lens File .................................................. 4-61 4-8 Paint Menu .............................................................................. 4-63 4-9 Maintenance Menu ................................................................. 4-76 4-10 Using the Memory Stick ......................................................... 4-82 4-10-1 Handling the Memory Stick ..............................
Resumen del contenido incluido en la página 9
Chapter 6 Maintenance 6-1 Testing the Camcorder Before Shooting ................................ 6-1 6-1-1 Preparations for Testing .................................................. 6-1 6-1-2 Testing the Camera ......................................................... 6-2 6-1-3 Testing the VTR .............................................................. 6-6 6-2 Maintenance ............................................................................ 6-10 6-2-1 Cleaning the Video Heads ........
Resumen del contenido incluido en la página 10
Overview 1-1 Features The HDW-F900 HD Camcorder combines a HD color video camera, of 1 which the effective picture elements are 1920(H) x 1080(V) and which 1) 2) uses 2/3-inch FIT CCD imagers with 2,200,000 picture elements, with an HDCAM portable videocassette recorder. The camcorder allows you to perform recording and playback with various formats, covering 50I, 30P, 29.97P, 25P, 24P and 23.98P as well as 60I and 59.94I formats The introduction of a new integrated circuit technology (LSI) for
Resumen del contenido incluido en la página 11
• Selectable video gain ensures a noise-free image. 1 • A simple switch operation enables automatic adjustment of the black set, black balance, and white balance. Memory functions make it easy to replicate the white balance setting appropriate for the lighting conditions. • Character display functions on the viewfinder indicate switch settings, automatic black and white balance adjustment, status indications, and warnings. • The warning system uses various types of warning indicators and sounds
Resumen del contenido incluido en la página 12
• Correction value to use a lens extender and for each lens can be stored 1 as a lens file, and then can be recalled. It is possible to shorten time for adjustment when replacing the lens. • A high-performance viewfinder is adjustable forward, backward, and sideways, and has a full range of auxiliary equipment. Chapter 1 Overview 1-3
Resumen del contenido incluido en la página 13
1-1-2 VTR Features 1 The VTR features of this camcorder are described below. • Use of the HDCAM format allows high performance HD digital recording and playback while preserving the same ease of use as conventional camcorder equipment. Also, recording and playback are allowed in any one of 8 different formats that the camera section supports. • The same cassette size (S size) as Digital BETACAM can be used to achieve the following long recording times: Approximately 40 minutes at 30 frames Appro
Resumen del contenido incluido en la página 14
• The built-in time code generator can be synchronized with an external 1 generator. • A lithium battery is the back-up power supply for the built-in time code generator enabling the time code to be held for approximately 5 years without charging the camcorder power supply. • Optional long-life battery packs are available. • Pressing the VTR START button on the camcorder or the VTR button on the lens ensures recording continuity from the very next frame. • Two analog audio input channels and the
Resumen del contenido incluido en la página 15
1-2 Example of System Configuration 1 The diagram below shows a typical configuration of the camcorder for ENG and EFP. For more information about the fittings, connections, or use of additional equipment and accessories, see Chapter 5 as well as the operation manuals for the connected equipment. Viewfinder-related equipment Fog-proof filter (Part No. 1-547-341-11) Video monitor for color image check BKW-401 Viewfinder while shooting Rotation Bracket Remote control equipment RCP-700 Series or RM
Resumen del contenido incluido en la página 16
1 Audio signal source Camera adaptor HDCA-901 for the input of External microphone the audio channels 3 and C-74, etc. 4 and the HD-SDI output CAC-12 Microphone Holder Audio equipment WRR-28M / 810 / 860 UHF Portable Tuner Power source Battery AC power BC-L100 supply Battery 100V AC Charger BP-L60A AC-550 Battery Pack AC Adaptor Chapter 1 Overview 1-7
Resumen del contenido incluido en la página 17
1-3 Precautions Use and Storage 1 Do not subject the camcorder to severe shocks The internal mechanism may be damaged or the body warped. After use Always turn off the power. Before storing the camcorder for a long period Remove the battery pack. Use and storage locations Store in a level, ventilated place. Avoid using or storing the camcorder in the following places. • Places subject to temperature extremes • Very damp places • Places subject to severe vibration • Near strong magnetic fields •
Resumen del contenido incluido en la página 18
Locations and Functions of Parts and Controls 2-1 Power Supply 2 1 2 4 3 Power supply 1 Battery attachment Attach a BP-L60A battery pack. 2 DC IN (external power input) connector (XLR type, 4-pin, male) To operate the HDW-F900 using an AC power supply, connect an AC- 550 AC Adaptor with the DC output cable supplied with the adaptor. To use an external battery, connect its DC output cable to the DC IN connector. Chapter 2 Locations and Functions of Parts and Controls 2-1
Resumen del contenido incluido en la página 19
3 BREAKER button If excessive current flows within the unit, the breaker is tripped automatically to shut off the power supply and protect the equipment. After performing internal checks or adjustments, use a pointed object 2 such as a pen to press down lightly on this button. If there is no problem, the power will again be supplied. 4 POWER switch This switch turns the main power supply on and off. 2-2 Chapter 2 Locations and Functions of Parts and Controls
Resumen del contenido incluido en la página 20
2-2 Accessory Attachments 1 2 2 3 4 5 6 7 8 Lens cable clamp Accessory attachments 1 Shoulder strap posts Attach the supplied shoulder strap to these posts. 2 Light shoe Attach an optional accessory such as a video light to this shoe. 3 Lens mount (special bayonet mount) Use this for mounting the lens. Chapter 2 Locations and Functions of Parts and Controls 2-3
