Manual de instrucciones de Cornelius IP150

Resumen del contenido incluido en la página 1

PR150/300 and IP150 Separate Drain for Upper Driptray Installation Instructions
INSTALLATION INSTRUCTIONS
PR150/300 & IP150 Separate Drain for Upper Driptray
1. Raise and lock driptray assembly (see
FIGURE 1).
Driptray Assembly
FIGURE 1
2. Clean out and dry driptray with a rag or paper towel, remove strainer if applicable (see FIGURE 2
and FIGURE 3).
Clean and Wipe Dry Inside Driptray
Strainer Upper Driptray Assembly
FIGURE 3
FIGURE 2
3. Remove insulation from driptray drain line
assembly (se

Resumen del contenido incluido en la página 2

PR150/300 and IP150 Separate Drain for Upper Driptray Installation Instructions 4. Cut PVC drain as shown in FIGURE 5. BE CAREFUL TO SECURELY HOLD DRAIN LINE TO AVOID DAMAGE TO UPPER DRIPTRAY!!! Cut PVC Drain FIGURE 5 5. Deburr edge of PVC and re-plumb and clamp with new flexible tube/clamp supplied in kit (see FIGURE 6). MAKE SURE THAT THE INSULATION COVERS ALL EXPOSED TUBING/CLAMP! Re-plumb with New Drain Clamp Drain Line Line and Insulation FIGURE 6 6. Re-route new drain tube to floor