Manual de instrucciones de Axor Montreux 16510XX1

Resumen del contenido incluido en la página 1

Installation Instructions / Warranty
Montreux
16510XX1
Montreux
16803XX1

Resumen del contenido incluido en la página 2

Montreux 3-Hole Basin Mixer 16510XX1 Montreux 2-Hole Kitchen Mixer 16803XX1 16803XX1 16510XX1 Technical Data Maximum flow rate: 2.5 gpm Operating pressure: max. 145 psi Recommended operating pressure: 14.5 - 72 psi Test pressure: 232 psi Hot water temperature: max. 176° F* Recommended hot water temperature: 120° - 140°F* 16510XX1 Hole size valves 1 1/4“ drain pull rod (16510 only) 1 1/4“ Max. mounting surface thickness 1 5/8“ Requires 3/8“ compression fittings -- not included *Please know and

Resumen del contenido incluido en la página 3

Installation 16510XX1 only: Place the pull rod assem- bly in the center hole of the mounting surface. Thread the friction washer, metal washer and mounting nut to the shank. Tighten the mounting nut by hand. Tighten the tensioning screws. 16803XX1 & 16510XX1: Place the fau- cet assembly in the two valve holes. 3

Resumen del contenido incluido en la página 4

Thread the friction washers, metal washers and mounting nuts to the valve shanks. Tighten the mounting nuts by hand. Tighten the tensioning screws. Install the spout, slide bushing and o-ring. Make sure that the slide bushing is oriented correctly. Tighten the set screw. Lightly coat the handle o-rings with the en- closed lubricant. Install the index caps on the hot and cold handles and pull rod assembly. 16510XX1 only: Install the pop-up drain. Caution: the hot water riser may be

Resumen del contenido incluido en la página 5

16510XX1& 16803XX1: Connect the supply lines to the stops with 3/8” compression fittings (not included). Use two wrenches, as shown in the diagram, to keep the supply hoses from twisting. Turn on the water and check all connections for leaks. Install the pop-up drain (16510XX1 only) Remove the plunger assembly. plunger assembly Unscrew the drain outlet flange from the tee. height adjuster Unscrew the tailpiece from the tee. Wrap the threads with TM Teflon thread tape and replace. outle

Resumen del contenido incluido en la página 6

Replacement Parts 16803XX1 5 4 2 1 11 13 3 11x2 12 6 2 9 10 1 handle 16597XXX 2 screw cover 97987000 3 sleeve 97993XXX 4 aerator cpl. 16510XXX 97991XXX 5 spout 16510XXX 97990XXX 6 hot cartridge 94009000 7 fixation set 96078000 8 pull rod 94067000 7 9 diverter knob 98619XXX 10 flange 98620XXX 11 spout large model 16803XXX 98616XXX 12 aerator cpl. 16803XXX 98617XXX 13 cold cartridge 94008000 8 14 supply hose 16510XXX 89437000 supply hose 16803XXX 14099001 14 XXX = Color 001 = Ch

Resumen del contenido incluido en la página 7

Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • To remove lime scale, use only products made specifically for that purpose. Always follow the manufactur

Resumen del contenido incluido en la página 8

THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. C. Labor or other expense