Resumen del contenido incluido en la página 1
User’s Guide
Hereby, EASTMAN KODAK COMPANY, declares that this Digital Photo Printer is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Resumen del contenido incluido en la página 2
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING INFORMATION This Class A digital apparatus complies with Canadian ICES-003. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equil
Resumen del contenido incluido en la página 3
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercia
Resumen del contenido incluido en la página 4
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING CONTENTS CONTENTS Contents .................................................................................................1 Safety precautions ..................................................................................2-4 Special features ......................................................................................5 Unpacking........................................................................................
Resumen del contenido incluido en la página 5
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT The Kodak 305 Photo Printer is designed to operate on 120 V AC 50/60 Hz in the U.S.A. and Canada, and 220 V - 240 V AC 50/60 Hz in Europe. Never connect to any outlet or power supply having a different voltage or frequency. WARNING : THIS APPARATUS MUST BE EARTHED. PROTECTIVE MEASURES IF ABNORMALITIES ARISE, ..... Use of the
Resumen del contenido incluido en la página 6
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING SAFETY PRECAUTIONS DO NOT LEAVE THE PRINTING UNIT OPEN When the printer is moved with the printing unit open, it may cause injury or damage. CLOSE THE PRINTING UNIT FIRMLY Take care not to pinch your hand when closing the printing unit. When the printing unit is not closed firmly, it may open during transportation and it may cause injury or damage. DO NOT PUSH DOWN ON THE PRINTING UNIT OR THE DOOR If you push down on the printin
Resumen del contenido incluido en la página 7
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING SAFETY PRECAUTIONS OTHER CAUTIONS • Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error. • Dust or other foreign matter adhering to the print paper or the ribbon cassette, or deformation resulting from exposure to extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images. • Clean the thermal head and p
Resumen del contenido incluido en la página 8
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING SPECIAL FEATURES SPECIAL FEATURES AVAILABLE 2 PRINT SIZES 2 printing sizes, 10x15 (4x6”) (max. 102 x 152 mm) and 15x20 (6x8”) (max. 152 x 203 mm) are selectable. 300 DPI HIGH RESOLUTION The Kodak 305 Photo Printer has a high resolution of 300 dpi for precise illustrations and sharp photographic images. LARGE CAPACITY PRINTING Maximum of 320 prints per roll for 10x15 (4x6”) is offered. Large economical print capacity per roll redu
Resumen del contenido incluido en la página 9
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING UNPACKING UNPACKING Take the printer out of the box by the following procedures. Make sure to check the accessories. Open the printer box from the top and remove Protective the top cushion containing the accessories out cardboard Accessories of the box. Remove the protective cardboard and then take the accessories out of the cushion. Carefully pull the printer up and out of the box. Pull the printer straight up as shown in
Resumen del contenido incluido en la página 10
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING FEATURES AND FUNCTIONS FRONT PANEL 6 5 4 3 2 7 1 8 9 8 POWER INDICATOR ( ) TRIM TRAY When the power is turned on, the indicator illuminates. Holds the paper strips generated by margin cut. Empty It normally illuminates green, however, blinks or the tray frequently to prevent jamming the strips at the illuminates orange depending on the printer status. See print outlet. page 16. NOTE Remove the tray before opening the door.
Resumen del contenido incluido en la página 11
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING FEATURES AND FUNCTIONS TRIM TRAY PAPER TRAY Hook and pull up the trim tray to attach it firmly. Engage the upper hooks of the tray on the protrusions Hold and pull the handle on the lower part of trim tray to on the top of the margin cut box (1). Then, secure the remove. tray by engaging the lower hooks in the holes on both sides of the box (2). 1 2 1 2 REAR PANEL 5 4 3 2 1 POWER SWITCH USB TERMINAL Use to switch the power ON
Resumen del contenido incluido en la página 12
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION PRINTER SETUP PROCEDURE Before printing, follow the printer setup listed below. (See pages 10 to 11.) Install the print paper to this printer. (See pages 12 to 13.) Install the ribbon to this printer. (See page 15.) Connect the printer to a personal computer. Make sure to close the printing unit when the setup procedure is completed. 9
Resumen del contenido incluido en la página 13
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION PRINT PAPER INSTALLATION Attach the supplied paper flanges to both side s of the print paper. When you pinch the latches on the paper flange, the stoppers retract into the shaft. Attach the flanges to the print paper with the stoppers retracted. Make sure that the flanges are attached to the print paper securely, and release the latches. NOTE • Take care not to pinch your fingers. • Do not remove the sticke
Resumen del contenido incluido en la página 14
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION Install the print paper into the printer. Place the printing paper in the correct orientation. Make sure the paper roll is firmly installed. CAUTION Do not push down on the printing unit or the door. If you push down on the printing unit or the door when they are open, this printer may fall and it can cause damage or injury. NOTE • Make sure to turn on the power before installing the print paper. Otherwise, a
Resumen del contenido incluido en la página 15
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION RIBBON INSTALLATION After installing the print paper, install the ribbon cassette into this printer. Before installing the ribbon cassette into this printer, load the ribbon in the ribbon cassette. It is recommended to clean the thermal head to keep good print quality when you replace the print paper and ribbon. NOTE • Place the ribbon cassette on a flat surface, when loading the ribbon. • Select a place that i
Resumen del contenido incluido en la página 16
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION Push the printing unit to close. Close the printing unit by pushing the right and left sides of the unit from the front with both hands. When a new paper is loaded and the printing unit is closed with the power turned on, the paper will be automatically fed and cut. CAUTION When closing the printing unit, be careful not to get your hands caught between the printer and the printing unit. Otherwise, you may get
Resumen del contenido incluido en la página 17
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION HANDLING OF PAPER / RIBBON KIT BEFORE PRINTING • Fingerprints or dust on the paper printing surface may produce poor print quality and cause paper jams. • When the print paper or ribbon is abruptly transferred from a cool place to a hot place, vapor or dew is generated on the surface, which causes paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature before use.
Resumen del contenido incluido en la página 18
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING BEFORE OPERATION CONNECTION WITH USB DATA SIGNAL EQUIPMENT CONNECTING TO PERSONAL COMPUTER (EXAMPLE) Check that the printer is turned on before connecting procedure. Turn on the power of a personal computer. Connect the printer and a personal computer with a USB cable. (when the operation system ® to be applied is other than Windows 7) Connect the printer to a personal computer as shown below. NOTE ® For Windows 7 users, do n
Resumen del contenido incluido en la página 19
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING ERROR MESSAGES AND COUNTERMEASURES INDICATIONS ON THE FRONT PANEL AND COUNTERMEASURES If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will illuminate or blink. In this case, follow the procedure described below. : Steady on : Off : Blinking ALARM PAPER RIBBON POWER Causes and Countermeasures Page 7 This printer is in standby mode. 15 Connect a USB cabl
Resumen del contenido incluido en la página 20
TROUBLE- PRECAUTIONS FEATURES PREPARATION OTHERS CONTENTS SHOOTING ERROR MESSAGES AND COUNTERMEASURES OVERCOMING PAPER JAMS Press the OPEN button to open the printing unit. Make sure that the power is turned on before opening the printing unit. Remove the ribbon cassette. Open the door. Pull out the defective part of the print paper to the direction of an arrow. Cut off the defective part of the print paper with scissors. NOTE • Make sure to cut off the printed part of the print paper. Fai
