Resumen del contenido incluido en la página 1
INSTRUCTION MANUAL
BE-0901E-AC-PC
BE-1201B-AC-PC
PC Control type
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
NINE NEEDLE ONE HEAD EMBROIDERY MACHINE
TWELVE NEEDLE ONE HEAD EMBROIDERY MACHINE
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle and thread take-up lever, and consequently there is always a danger of injury that can be caused by these parts. Follow the instructions from training personnel and instructors regar
Resumen del contenido incluido en la página 4
2 Notes on safety DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the face plate of the control box. Touching areas where high voltages are present can result in severe injury. CAUTION Environmental requirements Use the sewing machine in an area which is The ambient temperature should be within the free from sources of strong electrical noise range of 5°C to 35°C during use. such as high-frequency welders. Tem
Resumen del contenido incluido en la página 5
Installation Avoid setting up the sewing machine near sources of strong electrical noise such as high-frequency welding equipment. If this precaution is not taken, incorrect machine operation may result. CAUTION Sewing This sewing machine should only be used by Attach all safety devices before using the sewing operators who have received the necessary machine. If the machine is used without these training in safe use beforehand. devices attached, injury may result. Keep children away from the se
Resumen del contenido incluido en la página 6
Maintenance and inspection Maintenance and inspection of the sewing If the power switch needs to be left on when machine should only be carried out by a carrying out some adjustment, be extremely qualified technician. careful to observe all safety precautions. Ask your Brother dealer or a qualified Use only the proper replacement parts as electrician to carry out any maintenance and specified by Brother. inspection of the electrical system. When replacing a fluorescent lamp, use the same-type la
Resumen del contenido incluido en la página 7
3 Warning labels * The following warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer. 1 Safety devices: Finger guard, Belt cover, etc. W1644 2 W1645 Never touch or push the Never touch or push the needle 3 4 thread take up during bar during operation as it may operation as it may result in result in injuries or damage to i
Resumen del contenido incluido en la página 8
!! BE-1201B-AC-PC !! 4 Finger guard 3 !! BE-0901E-AC-PC !! Belt cover 6 4 3 1 Guard cover Finger guard 5 2 W1750 6 BE-0901E-AC-PC BE-1201B-AC-PC
Resumen del contenido incluido en la página 9
Before Starting Operation Do not force open the shutter for direct contact Do not bring disks near magnetic matters such as with the magnetic area. magnetic screwdriver or the back side of the programmer. W1209Q W1210Q Do not store floppy disks in an extremely high or Do not use floppy disks under high humidity. low ambient temperature. W1211Q W1212Q Do not use or store floppy disks in a dusty place. Do not store floppy disks under direct sunlight. Do not place it on cloth. W1214Q W1213Q Do not
Resumen del contenido incluido en la página 10
Protecting data in floppy disks Write-protection is available for a floppy disk to prevent undesired data deletion. A write-protected disk is read-only. It is recommended to provide write-protection for disks which contain important data. To do so, slide the write-protect notch to open the slot as shown below. Slide the notch in this direction to prevent data loss or overwriting. Slide the notch in this direction to write data. W1219Q 8 BE-0901E-AC-PC BE-1201B-AC-PC
Resumen del contenido incluido en la página 11
Procedure of Reading This Manual Explanation of models This manual explains two models: - BE-0901E-AC-PC - BE-1201B-AC-PC Explanation for individual model is provided by identifying the model name. Check the model before using the machine. The display is BE-0901E-AC-PC. Configuration of this manual This manual consists of the following chapters: Chapter 1 An Introduction of Embroidery Machine Provides information on the specifications of the embroidery machine, software installation environmen
Resumen del contenido incluido en la página 12
Contents Contents SAFETY INSTRUCTIONS................................................................................................................................................. 1 Before Starting Operation............................................................................................................................................... 7 Procedure of Reading This Manual................................................................................................................
Resumen del contenido incluido en la página 13
Contents Chapter 4 Selecting and Transferring Embroidery Data Functions (Command Reference)................................................................................................................................4-2 Description of Screen...................................................................................................................................................4-3 Creating a Directory....................................................................................
Resumen del contenido incluido en la página 14
Contents Changing Data ............................................................................................................................................................5-23 Changing Start.......................................................................................................................................................5-23 Changing End......................................................................................................................................
Resumen del contenido incluido en la página 15
Contents Setting the Machine ....................................................................................................................................................6-25 Needle Bar .............................................................................................................................................................6-25 Same Speed Range.................................................................................................................................
Resumen del contenido incluido en la página 16
Contents Chapter 7 Operation of Machine 1. Operating Procedures..............................................................................................................................................7-2 1-1 Power Source....................................................................................................................................................7-2 1-2 Preparation for Embroidering..........................................................................................
Resumen del contenido incluido en la página 17
Contents Chapter 9 Maintenance 1. Cleaning.....................................................................................................................................................................9-2 1-1 Cleaning and Lubrication of Rotary Hook ..........................................................................................................9-2 1-2 Cleaning of Needle Plate .........................................................................................................
Resumen del contenido incluido en la página 18
Contents 16 BE-0901E-AC-PC BE-1201B-AC-PC
Resumen del contenido incluido en la página 19
Chapter 1 An Introduction of Embroidery Machine
Resumen del contenido incluido en la página 20
Chapter 1 An Introduction of Embroidery Machine 1. Specifications Embroidery machine used 9 needle embroidery machine head 12 needle embroidery machine head Application Pattern embroidery Sewing speed Maximum 1200 rpm Max. 300 (V) x 450 (H) mm (flat hoop area) * Sewing area 300 (V) x 450 (H) mm (tubuler square hoop area) 85 (V) x 360 (H) mm (with cap frame) Feed system By pulse motor wire drive Stitch length 0.1 ~ 12.7 mm (minimum pitch: 0.1 mm) 3.5 2DD floppy disk (Tajima format) 3.5 2HD floppy
