Manual de instrucciones de TMIO PS302SS01

Resumen del contenido incluido en la página 1

Model PS302SS01 Professional Series
Internet Connected
30” Electric Built-In Double Wall Oven
Installation Instructions
Part No. 101769
Before You Start
2
Electrical Requirements
3
Internet & Network
3
Product Dimensions
4
Cabinet Dimensions
5
Cabinet Requirements
6
Installation Steps & Final Checklist
7 - 13
Cleaning Your Oven
14
More Information
14
Customer Service
14
IMPORTANT: Read and Save These Instructions
INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE HOME OWNER.
HOME OWNER: KEEP THESE

Resumen del contenido incluido en la página 2

! WARNING! BEFORE YOU START You can be seriously CAUTION: Oven is heavy. Use care in handling. Ensure that the oven is properly grounded. See ! injured if you don’t follow Electrical Requirements (page 3) and Installation Steps: the instructions in this Proper Installation is your responsibility. Ensure Step 3. Electrical Connections (page 9) for details. ! the oven is electrically connected by a qualified manual before you start. electrical installer and conforms with the National Req

Resumen del contenido incluido en la página 3

i ELECTRICAL REQUIREMENTS This unit is equipped with a No. 10 ground wire in IMPORTANT if location the conduit. utilizes aluminum wiring: The Connect Io Intelligent Oven requires a separate, grounded 4-wire,  40V (AC), 50 Amp The electrical conduit must be kept to the top left • Connect the aluminum service with its own circuit breaker. for a flush installation. Never cut the conduit. wiring to the copper wire using special connectors designed Wire sizes and connections must conform wit

Resumen del contenido incluido en la página 4

Resumen del contenido incluido en la página 5

Resumen del contenido incluido en la página 6

Resumen del contenido incluido en la página 7

Resumen del contenido incluido en la página 8

INSTALLATION STEPS DOOR REMOVAL: Remove door before installing the oven to ensure handle/oven door are i NOT used to lift oven. STEP . Removing Oven Doors j Remove the oven door before lifting the oven Door hinge Door hinge into the cabinet. This will reduce the weight of the in locked in unlocked • Open the door fully. oven and avoid serious damage if the handles are position position used to lift the unit. • In both back corners of the door you will see door See “Door Removal”. i ca

Resumen del contenido incluido en la página 9

Resumen del contenido incluido en la página 10

Resumen del contenido incluido en la página 11

Resumen del contenido incluido en la página 12

Resumen del contenido incluido en la página 13

INSTALLATION STEPS DOOR ATTACHMENT: i STEP 7. Final Checklist Door hinge Door hinge in locked in unlocked • Place both hinge arms back in the position position slots of the hinge receiver. j Make sure the oven is level, and securely fitted/ attached to the oven cabinetry. • Push the hinge arms in as far as they k Reinstall oven door. See “Door Attachment”. will go until the bottom of the door i meets the frame of the oven. When l Make sure to remove all internal packaging from the insert

Resumen del contenido incluido en la página 14

REPLACEMENT PARTS: CLEANING YOUR OVEN MORE INFORMATION Only authorized replacement parts may be used in performing service Cleaning Tips & Precautions Other Tips & References on the Connect Io Intelligent Oven. Do not repair or replace any part OVEN INTERIOR Keep the Connect Io Installation Manual in a of the appliance unless specifically Wash the interior of the Connect Io oven convenient location near the Connect Io Intelligent recommended in the Connect thoroughly with hot, soapy wat

Resumen del contenido incluido en la página 15