Manual de instrucciones de Jenn-Air MK30

Resumen del contenido incluido en la página 1

NEW CUTOUT DIMENSIONS
FOR INSTALLING BUILT-IN MICROWAVE
OVER A SINGLE WALL OVEN
Listed below are the cutout dimensions for installing a built-in microwave over a single wall
oven using the different trim kits that are available.
Please note when using trim kits MK27 and MK30 (vs. using A527 and A627), the height
cutout (Dim C) has increased slightly to 16 1/16" (from 15 3/4"). Also trim kit A627 is for use
with wall oven model W131 only.
S OPENING
Model Oven Size/ Dim "A" Dim "B" Dim "C"
Cabinet

Resumen del contenido incluido en la página 2

Step 3. Cabinet or Wall Opening Fneopening should be per dimensions described below. All comers should _esquare. The floor of the opening must be plywood and must be level _ndcapable of supporting 80 Ibs. I j, "A" "1 _TE REC_°TACLE _ Model I Dim"A" 8V: MK30 28=1,e" ' iv-_ Fig. 7 Installation Above Lower Oven ....... Note 1: When installing this Kit above a built-in oven, check built-in The;weight of _le Microwave oven installafion instmctians to determine cutout dimensions for the (lower) wall o

Resumen del contenido incluido en la página 3

INSTALLATION INSTRUCTIONS Microwave Oven Built-In Kit PART NO. 210649 With use of Model M168 Microwave oven. A. Removetop brackets and discard (retain screws - see Fig. 2). Note: A 27" minimum wide cabinetmust beprovided B. Replace large bracket withbracket included in trim kiL toinstallTrimKitMK27. attaching with screw removed from orJgJna(J see Fig. 3). Note; A 30" minimum wide C. Set microwave on its back so bottom is accessible. Remove cabinetmustbeprovided Stepleft2. outboard Bottom screwRa