Resumen del contenido incluido en la página 1
01US01COV.book Page 1 Monday, December 15, 2003 2:35 PM
3-088-727-12 (1)
Setting up your
1
CLIÉ™ handheld
Basic operations of
2
your CLIÉ™ handheld
Supplied
3 applications
Read Using CLIÉ Manuals
4
with your computer
This
Troubleshooting
First
CLIÉ™ handheld
Operating Instructions components
Personal Entertainment Organizer
PEG-TJ37
PEG-TJ27
© 2004 Sony Corporation
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 3-088-727-12 (1)
Resumen del contenido incluido en la página 2
01US01COV.book Page 2 Monday, December 15, 2003 2:35 PM The following manuals are included with your CLIÉ handheld. Refer to the following together with this manual. * If your CLIÉ handheld was purchased in Europe, the manual is not in printed Printed manual format, but is included as a PDF file on the Installation CD-ROM. Read This First (Operating Instructions), this manual* Explains setup and operation of your CLIÉ handheld. For safe use, make sure you read the supplied “Safety & Regulati
Resumen del contenido incluido en la página 3
01US01COV.book Page 3 Monday, December 15, 2003 2:35 PM Before use Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE. On the supplied software Copyright laws prohibit repr
Resumen del contenido incluido en la página 4
01US01COV.book Page 4 Monday, December 15, 2003 2:35 PM Table of Contents Restarting Setting up your CLIÉ™ handheld your CLIÉ™ handheld . . . . . . .35 Confirming the package Supplied applications contents . . . . . . . . . . . . . . . . 6 Setting up Using CLIÉ Manuals with your your CLIÉ™ handheld . . . . . . . 8 computer Charging your CLIÉ handheld. . . . . . . . . . . . . 8 Manuals Overview . . . . . . . . . . . . . . . . . . . . 42 Performing the initial setup after turning on Openin
Resumen del contenido incluido en la página 5
01US01COV.book Page 5 Monday, December 15, 2003 2:35 PM Notes on this manual This manual supports PEG-TJ37 and PEG-TJ27. – The illustrations in this manual are for PEG-TJ37, unless specified otherwise. – Differences between PEG-TJ37 and PEG-TJ27 are specified in each corresponding section. Screen shots in this manual may be different from the actual displays in the supplied software. The contents of this manual are written for users with a working knowledge of ® Windows . For details
Resumen del contenido incluido en la página 6
01US01COV.book Page 6 Monday, December 15, 2003 2:35 PM Setting up your CLIÉ™ handheld This chapter explains how to charge your CLIÉ handheld, perform the initial setup, and use it with your computer. Confirming the package contents Please confirm that all the following accessories are included in the package before setting up your CLIÉ handheld. CLIÉ handheld (1) AC power adapter (1) (including AC cord) USB cable (1) Stylus (1) The stylus is inserted into your CLIÉ handheld at the facto
Resumen del contenido incluido en la página 7
Setting up your CLIÉ™ handheld 01US01COV.book Page 7 Monday, December 15, 2003 2:35 PM Installation CD-ROM (1) Strap (1) Refer to the illustration below to attach the strap. Read This First - Operating Instructions (1, this manual)* Safety & Regulations Guide (1) Internet Connection Guide (1, for PEG-TJ37 only) Software license agreement (1) Graffiti 2 Card (1) Other printed materials * If your CLIÉ handheld was purchased in Europe, the manual is not in printed format, but is included as a PD
Resumen del contenido incluido en la página 8
01US01COV.book Page 8 Monday, December 15, 2003 2:35 PM Setting up your CLIÉ™ handheld The following operations are required before use. Step 1: Charging your CLIÉ handheld Before using your CLIÉ handheld for the first time, make sure you fully charge the battery. To a wall outlet 1 Connect the AC power adapter to the DC IN connector of the plug adapter. 2 Connect the plug adapter to the interface connector of your CLIÉ handheld . 3 Connect the AC cord to the AC power adapter (1). Then,
Resumen del contenido incluido en la página 9
Setting up your CLIÉ™ handheld 01US01COV.book Page 9 Monday, December 15, 2003 2:35 PM Note If the battery of your CLIÉ handheld is completely discharged, all user data stored on your CLIÉ handheld will be lost. How to remove the plug adapter Remove by pressing the plug adapter on both sides as illustrated. Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time The first time you turn on your CLIÉ handheld, you need to make some initial settings. Follo
Resumen del contenido incluido en la página 10
01US01COV.book Page 10 Monday, December 15, 2003 2:35 PM Tips If you cannot turn on your CLIÉ handheld Did you charge your CLIÉ handheld as described on page 8? b For details, refer to “Frequently Asked Questions: I cannot turn on my CLIÉ handheld” on page 51. Perform a soft reset if you cannot turn on your CLIÉ handheld even after charging it (page 35). 2 Take out the stylus. Take out the stylus You can use the stylus to enter text or to select applications. Tip You can extend or shor
Resumen del contenido incluido en la página 11
Setting up your CLIÉ™ handheld 01US01COV.book Page 11 Monday, December 15, 2003 2:35 PM 3 Following the on-screen instructions. Tap exactly in the center of the displayed mark. Tap the next targets, which are displayed at the bottom right and then in the center of the screen. Press lightly on the screen (Tap) The display in the screen depend on what country or region your CLIÉ handheld was purchased. Note If the stylus digitizer is not configured correctly, the scroll bar may not operate
Resumen del contenido incluido en la página 12
01US01COV.book Page 12 Monday, December 15, 2003 2:35 PM 5 Click [Yes] to confirm. (Only available for certain models or areas.) 6 Tap the box next to [Set Time:]. The Set Time dialog box is displayed. Tip You can reconfigure the date and time settings in the Preferences screen. b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting up the Date & Time preferences” in the “Handbook” (PDF format). 7 Tap v or V to set the current time. Tap each box to set the hour a
Resumen del contenido incluido en la página 13
Setting up your CLIÉ™ handheld 01US01COV.book Page 13 Monday, December 15, 2003 2:35 PM 9 Tap the box next to [Set Date:]. The Set Date screen is displayed. 10 Tap b or B to select the current year. 11 Tap the current month, then tap the current date. The Set Date screen closes. 12 Tap the box next to [Time Zone:]. The Set Time Zone screen is displayed. Continued on next page • • • • • • • • • • • • • • • • • • • • • • • • • • • 13 Sony Personal Entertainment Organizer PEG-TJ37/TJ27 3-088-7
Resumen del contenido incluido en la página 14
01US01COV.book Page 14 Monday, December 15, 2003 2:35 PM 13 Tap the region to set the time zone, then tap [OK]. 14 Tap V next to [Daylight Saving:] and select [On] or [Off]. 15 Tap [Next]. 14 Sony Personal Entertainment Organizer PEG-TJ37/TJ27 3-088-727-12 (1)
Resumen del contenido incluido en la página 15
Setting up your CLIÉ™ handheld 01US01COV.book Page 15 Monday, December 15, 2003 2:35 PM 16 Tap [Next] and [Done]. b The CLIE Launcher is displayed. The initial setup is complete. 15 Sony Personal Entertainment Organizer PEG-TJ37/TJ27 3-088-727-12 (1)
Resumen del contenido incluido en la página 16
01US01COV.book Page 16 Monday, December 15, 2003 2:35 PM Using your CLIÉ™ handheld with your computer Palm™ Desktop for CLIÉ stored on the supplied Installation CD-ROM must be installed on your computer. The software is used for data transfer between your CLIÉ handheld and computer, and handling data on your computer such as Address Book. b For details on the system requirements of computer, refer to “System requirements” on page 66. When Palm™ Desktop for CLIÉ is installed on your comput
Resumen del contenido incluido en la página 17
Setting up your CLIÉ™ handheld 01US01COV.book Page 17 Monday, December 15, 2003 2:35 PM ® 1 Quit all applications running on Windows . 2 Insert the supplied Installation CD-ROM into the CD-ROM drive of your computer. The Installation CD-ROM window is displayed. 3 Select your language. (Only available for certain models or areas.) 4 Click [Next] or [CLIÉ Basic], then click [Install] to install Palm™ Desktop for CLIÉ. The setup program starts and the InstallShield Wizard window is displayed.
Resumen del contenido incluido en la página 18
01US01COV.book Page 18 Monday, December 15, 2003 2:35 PM 9 Click [Install]. Installation of Palm™ Desktop for CLIÉ starts. “InstallShield Wizard Completed” message is displayed in the InstallShield Wizard window when the installation is complete. 10 Click [Finish]. The Sony CLIÉ Handheld Registration window is displayed for models for the U.S.A., Canada, and Europe only. Tip If you do not want to sign up for the customer service, click to deselect [Register your CLIÉ]. Installation of Pal
Resumen del contenido incluido en la página 19
Setting up your CLIÉ™ handheld 01US01COV.book Page 19 Monday, December 15, 2003 2:35 PM Step 3: Connecting your CLIÉ handheld and computer via the USB cable You can synchronize data between your CLIÉ handheld and computer by connecting them with the supplied USB cable after installing Palm™ Desktop for CLIÉ. About the USB cable The supplied USB cable has two connectors. Connect the “A” plug to the USB port of your computer and the mini “B” plug to the plug adapter. “A” plug mini “B”
Resumen del contenido incluido en la página 20
01US01COV.book Page 20 Monday, December 15, 2003 2:35 PM Step 4: Entering a user name for your CLIÉ handheld 1 Rotate the Jog Dial™ navigator to select (HotSync) on the CLIE Launcher and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap (HotSync) to display the HotSync screen. 2 Tap (HotSync) in the HotSync screen. ® The HotSync operation starts. The Applications required for setup are installed automatically. 3 Click [OK] when your user name is displa