Resumen del contenido incluido en la página 1
User's Guide
-
TWO WAY PAGER
Model P930
ReFLEXª Technology
ONE (1) YEAR STANDARD LIMITED WARRANTY
Quick Start Guide AND PROVISIONS (U.S.A. ONLY)
Motorola warrants the pager against defects in material and workmanship under normal
Installing the Battery
use and service for the period of time specified below. This express warranty is extended
a. Holding the pager face down, press down on
by Motorola, 1500 Gateway Blvd., Boynton Beach, Florida 33426 to the original end user
the arro
Resumen del contenido incluido en la página 2
MOTOROLA LICENSE AGREEMENT IMPORTANT-READ CAREFULLY: This license agreement is a legal agreement between you and Motorola, which includes computer software and associated media and printed materials, and may include “ online” or electronic documentation (“ SOFTWARE”). By installing, copying or using the SOFTWARE, you agree to be bound by the terms of this license agreement. If you do not agree with the terms of this license agreement, promptly return the unused SOFTWARE to the place from wh
Resumen del contenido incluido en la página 3
Deleting Messages .................................................................40 Contents Managing the Message Area .................................................40 Customize .................................................................... 48 Welcome ................................................................................ 1 Viewing System Status .........................................................48 Using This Manual ......................................................
Resumen del contenido incluido en la página 4
Radio Mode — Set your transmission mode to accommodate your Welcome TM environment. Your Timeport P930 Two-Way Pager accommo- dates the special requirements of hospital or medical facilities and TM Congratulations! Your new Motorola Timeport P930 Two-Way airline travel. Pager is about to change the way you communicate. With features Finally, everything you need in a smart, customizable paging such as wireless, smart paging and user-upgradeable system soft- device! Life just got easier. Cons
Resumen del contenido incluido en la página 5
“ On the PC Using This Manual Address Book Icons represent each application in the PC Partner Shell. Conventions Icons represent menu options that can be This manual uses several conventions to differentiate between selected from the menu bar. TM command and key access on your Timeport P930 Two-Way Pager E Shadowed keys indicate PC keyboard and your personal computer (PC). Specific conventions are also keys. used to highlight additional helpful information in the form of tips, notes, and
Resumen del contenido incluido en la página 6
Getting Started How Your Timeport P930 Two-Way Pager Works The Timeport P930 Two-Way Pager’s lightweight, wearable design What’s in the Box? allows you to open the flip and read your messages while the pager is still in the belt holster. Audio and vibrate alerts notify you of Your new Timeport P930 Two-Way Pager comes with: incoming and waiting messages. The keyboard provides text entry 1 Timeport P930 Two-Way Pager capabilities that allow you to send full text messages. All this is 1 NiMH
Resumen del contenido incluido en la página 7
“ “ “ “ Status Line — On the menu wheel, displays the in-range/out-of- TM Press the NavDisc up or down to highlight an application. range transmission status (Basic Service, Full Service, or Storing Continue pressing the NavDisc in the same direction and the menu Messages); for more information, see “ To set the transmission wheel spins in that direction to display the next three applications. mode:” on page 23. On application screens, explains the function of the highlighted TIP To select
Resumen del contenido incluido en la página 8
Caps Lock — Caps Lock setting is turned on; all let- Tab — Moves the cursor between fields (e.g., text field to ters will be capitalized. button field). From the text field, press Tab to access the button field. Continue pressing tab to cycle back to your The Keyboard initial starting point, or press to tab backward. Back — Cancels input for the current screen and goes back to pre- vious screen. Continue pressing to return to the Home Screen. Select — Selects a highlighted item from a list
Resumen del contenido incluido en la página 9
Symbols — Activates the Symbols key. Fifteen (15) Shift — Activates the Shift-mode control keys. Press additional symbols can be used. Press to then release. The status icon appears on the view the Symbols screen, then press the key that screen. The next letter pressed will be capitalized, or corresponds to the symbol you want to add to your the next control key pressed will indicate a Shift-mode message. The original screen reappears with the function. Shift-mode characters are colo
Resumen del contenido incluido en la página 10
The battery can be charged separately or while it is in the pager. TIP Before leaving on a trip, make sure the battery and any The charger is intentionally designed so that you cannot place extra batteries are fully charged. All rechargeable batteries both the extra battery and the pager in the charger at the same experience self-discharge, meaning that a small amount of time. energy discharges everyday as a battery sits on the shelf. Recharging the batteries to full charge should take
Resumen del contenido incluido en la página 11
To remove the battery for charging: To recharge the battery outside of the pager: 1. Holding the pager face down, press down on the arrow in the 1. Insert the transformer’s round connector into the back of the center of the battery door and slide the battery door away from charger. the center of the pager. Transformer Two-pronged Plug Battery Compartment Transformer Round Connector 2. Lift the battery door away from the pager. 2. Insert the transformer’s two-pronged plug into any standard Batt
Resumen del contenido incluido en la página 12
“ To replace the battery: To connect the docking station to your computer: 1. Match the positive (+) marking on the fresh battery with the 1. Connect one end of the RS232 cable to your computer’s nine-pin two (2) contact side of the pager’s battery compartment and the serial port. negative (-) marking with the one (1) contact side of the battery 2. Connect the other end of the RS232 cable to the nine-pin compartment. connector in the back of the docking station. 2. Insert the battery into the
Resumen del contenido incluido en la página 13
To reset your pager: System Setup Turn off your pager as indicated in the previous procedure, then press any key to turn the pager back on. Your Timeport P930 Two-Way Pager comes pre-configured and ready for use. Features are available that allow you to re-configure -or- your pager to more closely reflect your lifestyle, set the date and 1. Holding the pager face down, press down on the arrow in the time, and select the alert modes and types. For information on center of the battery door a
Resumen del contenido incluido en la página 14
Choose FLEX OS upgrade and follow the instructions for down- Migrating from Your PageWriter 2000 Smart loading. Pager to the Timeport P930 Two-Way Pager 3. Insert your "old" PageWriter 2000 Smart Pager, version 1.0.50, Attention! Current users of the PageWriter™ 2000 Smart Pager. or 1.0.70.3, or 2.0.1.14 in the docking station. PLEASE READ THIS IMPORTANT INFORMATION about migrating from your PageWriter 2000 Smart 4. On the menu wheel, select , and then select Pager to the Timeport P930 Tw
Resumen del contenido incluido en la página 15
Configuring Your Timeport P930 Two-Way Pager TIP When moving to another zone, reset your pager back to Full Service Send/Receive mode until you receive your first page, Before attempting to send or receive messages, ensure your pager is set to the proper transmission mode. You can also adjust the then you can put the pager back into Receive Only mode. message text size or turn on or off the audible keyboard clicks when This allows you to tell the service provider where to find preparing you
Resumen del contenido incluido en la página 16
To select an alert mode: 2. From the Time field, press up or down in each field to change 1. From the Home screen, press to the right or to highlight the hour, minute, or AM/PM. Press right or left to move the alert mode icon. between Time fields. 2. Press to cycle to the desired alert mode. 3. Press to access the Date field, then press up or 3. Press or to exit the alert mode icon and accept the down to change the numbers for the date. Press right or left change. to move between
Resumen del contenido incluido en la página 17
“ Assigning Alert Types Addresses Different alert types can be assigned to the inboxes that receive your messages. This allows you to identify by sound the type of message you are receiving. An alert type can be set for each of the The Timeport P930 Two-Way Pager contains an address book for alert modes. If an audible alert mode (Loud or Soft) is selected from storing the address information of each person or group you might the Home screen, the alert you assigned on the Set Alert Screen
Resumen del contenido incluido en la página 18
“ The Address Book sorts address entries alphabetically based on 5. Select to accept the changes and return to the Address the first letter in the address name. Type the last name first if Book Entries screen. you want to find addresses for individuals by their last name. 4. In the Carrier field, press left or right to scroll through the Editing Addresses paging service providers. Highlight the name of your carrier, Addresses saved in your Address Book can be updated as informa- tion c
Resumen del contenido incluido en la página 19
£ “ “ “ To change the group’s membership: Write 1. On the menu wheel, select . The Write application enables you to compose messages using the 2. Press up or down to highlight the name of the group to which QWERTY keyboard, insert Quick Text, and append your signature. you are adding or deleting members, then select . You can also choose to send your messages at a later time, file the 3. From the Choose Members screen, select the entries from the messages in inboxes prior to sending, and e
Resumen del contenido incluido en la página 20
4. Select the recipient(s) from the Address Book list. Adding Quick Text The Quick Text feature enables you to quickly add frequently used TIP Each recipient can have more than one entry. Select the text to your messages. This saves time and key strokes when recipient by the type of messaging device receiving the mes- composing a message. See “ Customizing Message Features” on sage (e.g., two-way pager, one-way pager, email, fax). page 51 for information on composing your own Quick Text TIP
