Resumen del contenido incluido en la página 1
ADSL Modem with
Built-In 802.11g
Wireless Router
Network your computers with this one-box
solution that connects and shares your ADSL
Internet access
User Manual
F5D7630-4A
F5D7630-4B
Resumen del contenido incluido en la página 2
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 3
INTRODUCTION Thank you for purchasing the ADSL Modem with Built-In 802.11g Wireless Router (the Router). In minutes, you will be able to share your Internet connection and network your computers. The following is a list of features that make your new Router an ideal solution for your home or small office network. OVERVIEW Key Features Integrated 802.11g Wireless Access Point 802.11g is an exciting new wireless technology that provides up to 54Mbps (nearly five times faster than 802.11b) data rat
Resumen del contenido incluido en la página 4
INTRODUCTION SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding. Integrated 10/100 4-Port Switch The Router has a built-in, four-port network switch to allow your wired computers to share printers, data
Resumen del contenido incluido en la página 5
INTRODUCTION Package Contents • ADSL Modem with Built-In 802.11g Wireless Router • RJ45 Ethernet Networking Cable (for connecting the Router to the computer) • RJ11 Phone Line Cord (for connecting the Router to the ADSL line)* • ADSL In-Line Filter* •Power Supply • Quick Installation Guide •User Manual CD-ROM • Registration Card System Requirements • ADSL connection •At least one computer with an installed network interface adapter •TCP/IP networking protocol installed on each computer •CAT5 net
Resumen del contenido incluido en la página 6
KNOWING YOUR ROUTER Front Panel Power LED ADSL – SYN ADSL – Data LED Wireless LAN Port (PWR) Status LED Network LED Status LEDs Power LED (PWR) OFF Router is OFF Green Router is ready ADSL – SYN Status LED OFF No ADSL connection Solid Green ADSL connection is ready Blinking Green Negotiating connection This LED lights in GREEN to indicate that your Modem Router is connected properly to the ADSL line. ADSL – Data LED OFF No WAN connection Green WAN connection is ready Blinking Indicates WAN act
Resumen del contenido incluido en la página 7
KNOWING YOUR ROUTER LAN Port-Status LEDs OFF No device is linked to the port Solid Orange 10/100Base-Tx device connected Blinking Orange Port activity These LEDs are labeled 1–4 and correspond to the numbered ports on the rear of the Router. When a computer is properly connected to one of the LAN ports on the rear of the Router, the LED will light. When information is being sent over the port, the LED blinks rapidly. Rear Panel Antennas LAN Ports Reset Button Power Jack ADSL Port LAN Ports The L
Resumen del contenido incluido en la página 8
KNOWING YOUR ROUTER maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. a. Resetting the Router Push and release the Reset button. When the Power/Ready light becomes solid again, the reset is complete. b. Restoring the Factory Defaults Press and hold the Reset button for 10 seconds then release it. When the Power/Ready light becomes solid again, th
Resumen del contenido incluido en la página 9
PLACEMENT OF YOUR ROUTER Proper placement of your Router is important to ensure the best performance of your wireless network. Typically, indoors your Wireless Router can provide a circular coverage area of 250 feet or more. However, different types of construction materials and other obstructions in a building can greatly affect the wireless signal and decrease the range. Whenever possible, your Router should be placed as close as possible to the center of the area that you want to cover. In mu
Resumen del contenido incluido en la página 10
CONNECTING AND CONFIGURING YOUR ROUTER ISP Settings Please collect the following information from your ISP before setting up the Wireless ADSL Modem Router. For PPPoE and PPPoA users • VCI and VPI number • An ISP account user name and password For fixed IP users • IP address and subnet mask • IP address for your ISP’s Gateway Server and Domain Name Server Connect the System Connect the ADSL Line Run standard telephone cable from the wall jack providing ADSL service to the ADSL port on your Wire
Resumen del contenido incluido en la página 11
CONNECTING AND CONFIGURING YOUR ROUTER Installing with a Splitter Installing a Splitterless Connection If you are using a splitterless (G.lite) connection, then your service provider will attach the outside ADSL line directly to your phone system. In this case, you can connect your phones and computer directly to the incoming ADSL line, but you will have to add low-pass filters to your phones as shown on the next page. 9
Resumen del contenido incluido en la página 12
CONNECTING AND CONFIGURING YOUR ROUTER Installing without a Splitter Attach to your Network Using Ethernet Cabling The four LAN ports on the ADSL Modem Router auto-negotiate the connection speed to 10Mbps Ethernet or 100Mbps Fast Ethernet, as well as the transmission mode to half duplex or full duplex. Configuring the Router The Belkin Wireless ADSL Modem Router is equipped with a Web-Based Interface that you can use to set up the Router. From the Web-Based Interface, you can perform the follow
Resumen del contenido incluido en la página 13
CONNECTING AND CONFIGURING YOUR ROUTER • Set the Router’s firewall to work with specific applications (port forwarding). • Set up security features such as client restrictions and MAC address filtering. •Enable the DMZ feature for a single computer on your network. • Change the Router’s internal password. • Reset the Router. • Reset the Router’s default settings. • Update the Router’s firmware. Step 1: Installing the Hardware 1. Power down your equipment. 2. Connect each PC to one of the ports o
Resumen del contenido incluido en la página 14
CONNECTING AND CONFIGURING YOUR ROUTER 6. Turn on the rest of your computers. After your computers boot up, a LAN link light (on the front of the Router) will be on for each port to which a wired computer is connected. These lights are your means to verify that your computers are connected. LAN Port Status LEDs Step 2: Set your Computer’s Network Settings to Work with a DHCP Server Configure the TCP/IP settings on your computers to obtain an IP address automatically. The Router will assign eac
Resumen del contenido incluido en la página 15
CONNECTING AND CONFIGURING YOUR ROUTER Logging into the Router To configure the Router’s settings, you have to log in. The Router is supplied with no password entered. In the login screen, leave the password blank and click the “Submit” button to log in. Logging out of the Router One computer at a time can log into the Router for the purposes of making changes to the settings of the Router. Once a user has logged in to make changes, there are two ways that the computer can be logged out. Clickin
Resumen del contenido incluido en la página 16
NAVIGATING THE WEB BROWSER INTERFACE Setup Wizard 1. Internet Sharing Select the connection type you are using. This information is provided by your ISP. 2. Setting your ISP Connection Type to PPPoE or PPPoA Enter the PPPoE (Point-to-Point Protocol over Ethernet) or PPPoA information in the provided spaces, and click “Next”. Click “Apply” to activate your settings. This information is provided by your ISP. User Name - Enter the ISP assigned user name. (Assigned by your ISP). Password - Enter you
Resumen del contenido incluido en la página 17
NAVIGATING THE WEB BROWSER INTERFACE 3. Setting your Connection Type to Disable Internet Sharing Enter VPI/VCI value in the provided spaces, and then click “Next”. Click “Apply” to activate your settings. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). 4. Setting your Connection Type to Multiple Protocol over ATM Mode Enter ATM (Asynchronous Transfer Mode) information in the provided spaces, and click “Next”. Click
Resumen del contenido incluido en la página 18
NAVIGATING THE WEB BROWSER INTERFACE VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP). Default Gateway - Enter a default gateway IP address. If the Wireless ADSL Modem Router cannot find the destination address within its local network, it will forward the packets to the Default Gateway. (Assigned by your ISP). 5. Click apply to activate your settings. You have finished installing your new Belkin Router. You should hav
Resumen del contenido incluido en la página 19
UNDERSTANDING THE WEB-BASED USER INTERFACE The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. 110 2543 98 7 6 1. Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links. The links are divided into logical categories and grouped by tabs to make finding a particular setting easier to find. Clicking on the header of each tab will show you a short description of the t
Resumen del contenido incluido en la página 20
UNDERSTANDING THE WEB-BASED USER INTERFACE page where you will need to enter a password. When you are logged into the Router, you can make changes to the settings. When you are finished making changes, you can log out of the Router by clicking the “Logout” button. For more information about logging into the Router, see the section called “Logging into the Router”. 5. Help Button The “Help” button gives you access to the Router’s help pages. Help is also available on many pages by clicking “more
