Resumen del contenido incluido en la página 1
P-320W
802.11g Wireless Firewall Router
Quick Start Guide
Version 2.00
Edition 1
10/2006
Table of Contents
ENGLISH 3
DEUTSCH 19
ESPAÑOL 39
FRANÇAIS 58
ITALIANO 76
РУ С С КИ Й 96
SVENSKA 116
繁體中文 135
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
ENGLISH ENGLISH Overview The Mer produkthjalp finns pa http://www.support.zyxel.se is a broadband router with a built-in four-port 10/ 100 Mbps switch. The Mer produkthjalp finns pa http://www.support.zyxel.se makes it easy to set up a small home or office network and share Internet access via a broadband (cable/DSL) modem. You should have an Internet account already set up and have been given most of the following information. Table 1 Internet Account Information Your device’s WAN
Resumen del contenido incluido en la página 4
ENGLISH 1 Hardware Connections Do the following to make hardware connections for initial setup. WAN Connection 1 Connect your modem to the “WAN” port using the cable that came with your modem. LAN Connection 2 Connect your computer to a "LAN" port using the included Ethernet cable POWER Connection 3 Use the included power adaptor to connect the POWER socket to an appropriate power source (see the User’s Guide for power adaptor specifications by region) 4
Resumen del contenido incluido en la página 5
ENGLISH The LEDs After you’ve made the connections, push in the power button to turn on the Mer produkthjalp finns pa http:// www.support.zyxel.se. Look at the front panel LEDs. When you connect the power, the PWR and WLAN LEDs come on. The LAN and WAN LEDs turn on if the corresponding connections are properly made. 2 Accessing the Web Configurator 1 Launch your web browser. Enter “192.168.1.1” as the web site address. Note: If you do not see the next screen, then please go to section
Resumen del contenido incluido en la página 6
ENGLISH Note: The Next button is located on the bottom right of each screen. 5 Click Go to Wizard setup to set up your Mer 6 Choose your language from the drop-down list box. produkthjalp finns pa http://www.support.zyxel.se Click Next to proceed with the Connection Wizard. for the first time.. 3 Internet Access Setup Note: Enter the Internet access information exactly as given to you by your ISP in each wizard screen and then click Next to continue or click Back to return to the previous scre
Resumen del contenido incluido en la página 7
ENGLISH STEP 2: Wireless LAN Configure ONE of the following wireless security types on the Mer produkthjalp finns pa http:// www.support.zyxel.se: • Auto security: Uses WPA-PSK security with an automatically generated Pre-Shared Key. View the generated Pre-Shared Key in the Wireless LAN screen. Note: Your wireless clients must support WPA-PSK and use the same key. • None: Have no wireless LAN security configured. If you do not enable any wireless security on your Mer produkthjalp finns pa htt
Resumen del contenido incluido en la página 8
ENGLISH Auto or No Wireless Security A Enter a unique name to identify the Mer produkthjalp finns pa http://www.support.zyxel.se in the wireless LAN. B Leave the default setting. The Mer produkthjalp finns pa http://www.support.zyxel.se and wireless client must use the same channel ID. C Select a level of wireless security. Choose Auto or None. D For Auto security select Yes to enable OTIST. If you select None select either Yes to enable OTIST or select the No radio button and click Next to co
Resumen del contenido incluido en la página 9
ENGLISH Basic(WEP) Security A Enter a unique name to identify the Mer produkthjalp finns pa http://www.support.zyxel.se in the wireless LAN. B Leave the default setting. The Mer produkthjalp finns pa http://www.support.zyxel.se and wireless client must use the same channel ID. C Select Basic(WEP) security. D You can generate or manually enter a WEP key by either: Entering a Passphrase (up to 32 printable characters) and clicking Generate. The Mer produkthjalp finns pa http://www.support.zyxel
Resumen del contenido incluido en la página 10
ENGLISH A D B C E F G D E Extend(WPA-PSK) Security A Enter a unique name to identify the Mer produkthjalp finns pa http://www.support.zyxel.se in the wireless LAN. B Leave the default setting. The Mer produkthjalp finns pa http://www.support.zyxel.se and wireless client must use the same channel ID. C Select WPA-PSK security. D Type a pre-shared key to have a more secure wireless connection than WEP encryption. Type from 8 to 63 case-sensitive ASCII characters.You can set up the most secure w
Resumen del contenido incluido en la página 11
ENGLISH A B C D D E WAN STEP 3: The wizard attempts to detect which WAN connection type you are using. If the wizard does not detect a connection type, you must select ONE from the drop-down list box. Check with your ISP to make sure you use the correct type: 1 Ethernet 11
Resumen del contenido incluido en la página 12
ENGLISH 2 PPPoE 3 PPTP. Note: If you were given Internet access settings, enter them in the following fields. Otherwise leave the default settings and just click Next Ethernet Connection A Select Ethernet as your WAN connection type. B Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to D. Or Select Use fixed IP address provided by your ISP to give the Mer produkthjalp finns pa http:// www.support.zyxel.se a fixed, unique IP address. C Enter a WAN I
Resumen del contenido incluido en la página 13
ENGLISH A B C D PPPoE Connection A Select PPPoE as your WAN connection type. BType a Service Name (Optional), User Name and Password. C Select Get automatically from your ISP if your ISP did not assign you a fixed IP address. Skip to E. Or select Use fixed IP address provided by your ISP to give the Mer produkthjalp finns pa http:// www.support.zyxel.se a fixed, unique IP address. D Enter the WAN IP address of the neighboring device, if you know it. If you do not, leave the default settings. If
Resumen del contenido incluido en la página 14
ENGLISH A B C D E 14
Resumen del contenido incluido en la página 15
ENGLISH PPTP Connection A Select PPTP as your WAN connection type. BType a User Name and Password C Select Get automatically from ISP if your ISP did not assign you a fixed PPTP IP address. Or select Use fixed IP address to give the Mer produkthjalp finns pa http://www.support.zyxel.se a fixed, unique PPTP IP address and subnet mask. D Type a PPTP Server IP Address E Type a Connection ID/Name (if provided) F Select Get automatically from your ISP if your ISP did not assign you a fixed IP addre
Resumen del contenido incluido en la página 16
ENGLISH A B C D E F G H 16
Resumen del contenido incluido en la página 17
ENGLISH Internet Access Setup Complete If you have any Internet access problems, follow the on-screen instructions. Click Finish to complete the Connection Wizard. 4 Troubleshooting Note: If your computer cannot automatically communicate with the device, then see the multimedia tutorial on how to set up your computer to receive an IP address dynamically or give it a fixed one in the range specified in section 4.1. PROBLEM CORRECTIVE ACTION None of the LEDs turn on when Make sure that you have
Resumen del contenido incluido en la página 18
ENGLISH PROBLEM CORRECTIVE ACTION Cannot access the Mer Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with produkthjalp finns pa http:// JavaScript enabled. www.support.zyxel.se from my Make sure you enter the password correctly (the field is case sensitive). computer (continued). If you’ve forgotten the Mer produkthjalp finns pa http://www.support.zyxel.se’s password, use the RESET button. Press the button in for about 10 seconds (the WAN light turns off and then
Resumen del contenido incluido en la página 19
DEUTSCH DEUTSCH Übersicht Der Mer produkthjalp finns pa http://www.support.zyxel.se ist ein Breitband-Router mit einem integrierten 10/ 100 Mbps Switch mit vier Anschlüssen. Mit dem Mer produkthjalp finns pa http://www.support.zyxel.se können Sie ganz einfach ein kleines Heim- oder Büronetzwerk aufbauen und einen Internetzugang von mehreren Rechnern aus über ein Breitbandmodem (Kabel/DSL) nutzen. Voraussetzung sind ein bestehendes Internetkonto und die folgenden Informationen. Tabelle 1
Resumen del contenido incluido en la página 20
DEUTSCH 1 Anschließen der Hardware Bei der Erstinstallation müssen die folgenden Hardwareverbindungen hergestellt werden. Herstellen der WAN-Verbindung 1 Schließen Sie Ihr Modem mit dem mitgelieferten Kabel an den WAN-Anschluss an. Herstellen der LAN-Verbindung 2 Schließen Sie Ihren Computer mit dem mitgelieferten Ethernet-Kabel an einen "LAN"-Anschluss an. Anschließen an das Stromnetz 3 Verbinden Sie den Netzanschluss des Geräts (POWER) mit dem mitgelieferten Netzadapter mit einer geeigneten
