Manual de instrucciones de ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI

Resumen del contenido incluido en la página 1

P-2602HWNLI
802.11g Wireless ADSL2+ 4-port VoIP IAD
Quick Start Guide
Version 3.40
09/2007
Edition 2

Resumen del contenido incluido en la página 2

P-2602HWNLI Quick Start Guide Overview Your P-2602HWNLI Integrated Access Device allows you to make phone calls over the Internet (Voice over Internet, or VoIP) as well as regular analog (PSTN) or digital (ISDN) phone calls. It also provides Internet access for your network. The P-2602HWNLI also allows wired and wireless clients to safely access the Internet. It can connect up to four Ethernet devices, and includes wireless networking capability. The following figure shows your P-2602HWNLI,

Resumen del contenido incluido en la página 3

P-2602HWNLI Quick Start Guide 1 Connect Your P-2602HWNLI 1DSL: Use the gray ADSL cable to connect the DSL port to a telephone jack or the DSL (or MODEM) jack on a splitter. 2 Do one of the following to connect one or more telephones to the P-2602HWNLI. These are also known as Foreign eXchange Station (FXS) connections. PHONE: Use telephone wire (and any included telephone adaptors) to connect analog telephones to these ports. Use the PHONE 1 port first. 3

Resumen del contenido incluido en la página 4

P-2602HWNLI Quick Start Guide Note: When the P-2602HWNLI does not have power, only the phone connected to the PHONE 1 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls. ISDN PHONE: Use telephone wire to connect one or more ISDN telephones or an ISDN PBX to this port. 3 PSTN/ISDN: You can connect either a PSTN or an ISDN line to this port. This is a Foreign eXchange Office (FXO) port. Use the included green PSTN c

Resumen del contenido incluido en la página 5

P-2602HWNLI Quick Start Guide 2 Initial Configuration Open your web browser, and go to http://www.zyxel.com. Your P-2602HWNLI tries to detect your Internet connection. This takes about two minutes. If any other screens appear, follow the directions in the screen. If http://www.zyxel.com opens correctly, your Internet access is ready. If the web page does not open, use the following steps. You should have information provided by your ISP. 1 Enter 192.168.1.1 as the web site address 2 Type the d

Resumen del contenido incluido en la página 6

P-2602HWNLI Quick Start Guide 4 Click Apply to replace the factory default certificate for added security; alternatively click Ignore to proceed if you do not want to change the certificate now. This screen displays only when you log in as an administrator. 5 Select Go to Wizard setup and click Apply. 6 Click INTERNET/WIRELESS SETUP to configure your Internet access and/or wireless settings. Follow the directions in the screens and enter your Internet access information exactly as it

Resumen del contenido incluido en la página 7

P-2602HWNLI Quick Start Guide Note: You should have a voice account already set up. 1 Select the SIP server profile of your VoIP service provider, either SIP Profile 1 or SIP Profile 2, and click Apply. If your VoIP service provider is not in the list, select None and click Apply. 2 Fill in the fields with information from your voice service provider. Leave the default settings in fields for which no information was provided (except if otherwise specified). If you have a SIP account li

Resumen del contenido incluido en la página 8

P-2602HWNLI Quick Start Guide PSTN (or ISDN) Line Pre-fix Number: If you want to make a regular phone call after one of your VoIP accounts has been registered you have to dial this number before you dial the phone number. Relay to PSTN (or ISDN) Line: Enter phone numbers for regular phone calls (that do not use the Internet) that you always want to dial without the prefix number. For example, enter emergency phone numbers here. Click Apply. 2.3 Make Calls Through the Internet When a PHONE