Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Home Screen....................................................................................................... 76 Table of Contents Mode Screen ....................................................................................................... 77 ADSL Screen....................................................................................................... 78 CHAPTER 1 INTRODUCTION...................................................................................... 1 Operatio
Resumen del contenido incluido en la página 3
Broadband ADSL Router User Guide • IPoA, PPPoE, PPPoA, BPA, Direct Connection Support. The Broadband ADSL Chapter 1 Router supports all common connection methods. • Auto-detection of Internet Connection Method. In most situations, the Broadband Introduction 1 ADSL Router can test your ADSL and Internet connection to determine the connection method used by your ISP. This Chapter provides an overview of the Broadband ADSL Router's features • Fixed or Dynamic IP Address. On the Intern
Resumen del contenido incluido en la página 4
Introduction Broadband ADSL Router User Guide • Remote Management. The Broadband ADSL Router can be managed from any PC on Package Contents your LAN. And, if the Internet connection exists, it can also (optionally) be configured via the Internet. The following items should be included. If any of these items are damaged or missing, please • Network Diagnostics. You can use the Broadband ADSL Router to perform a Ping or contact your dealer immediately. DNS lookup. • The Broadband ADSL Ro
Resumen del contenido incluido en la página 5
Introduction Broadband ADSL Router User Guide Rear Panel Physical Details Front-mounted LEDs Figure 3: Rear Panel ADSL port Connect this port to your ADSL line. Figure 2: Front Panel 10/100BaseT Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. LAN connections Power LED On - Power on. (Green) Note: Off - No power. Any LAN port on the Broadband ADSL Router will automatically Status LED Off - Normal operation. function as an "Uplink" port when requi
Resumen del contenido incluido en la página 6
Broadband ADSL Router User Guide 4. Power Up Chapter 2 Connect the supplied power adapter to the Broadband ADSL Router. Use only the power adapter provided. Using a different one may cause hardware damage. Installation 2 This Chapter covers the physical installation of the Broadband ADSL Router. 5. Check the LEDs • The Power LED should be ON. • The Status LED should flash, then turn Off. If it stays on or blinking after 60 seconds, Requirements there is a hardware error. • Networ
Resumen del contenido incluido en la página 7
Broadband ADSL Router User Guide Configuration Program Chapter 3 The Broadband ADSL Router contains an HTTP server. This enables you to connect to it, and Setup 3 configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: This Chapter provides Setup details of the Broadband ADSL Router. • Netscape 7.1 or later. • Mozilla 1.6 or later Overview • Internet Explorer V5.5 or later This chapter describe
Resumen del contenido incluido en la página 8
Setup Broadband ADSL Router User Guide If you can't connect If the Broadband ADSL Router does not respond, check the following: • The Broadband ADSL Router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" com- mand: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the
Resumen del contenido incluido en la página 9
Setup Broadband ADSL Router User Guide PPPoE connections are neither necessary nor supported. Connection Type Details ISP Data required Dynamic Your IP Address is allocated Often, none. IP Address automatically, when you con- Some ISP's may require you to nect to you ISP. To Configure additional VCs use a particular Hostname or Domain name, or MAC (physical) 1. Start the Setup Wizard again. address. 2. On the first screen, select VC2, and click "Next" Static (Fixed) Your ISP alloca
Resumen del contenido incluido en la página 10
Setup Broadband ADSL Router User Guide Home Screen LAN Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, Use the LAN link on the main menu to reach the LAN screen. An example screen is shown you will see this screen when you connect. An example screen is shown below. below. Figure 10: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the Broadband ADSL Router, as seen from the local LAN. Use the default value unless the addr
Resumen del contenido incluido en la página 11
Setup Broadband ADSL Router User Guide Password Screen DHCP The password screen allows you to assign a password to the Broadband ADSL Router. What DHCP Does A DHCP (Dynamic Host Configuration Protocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. • The client request is made when the client device starts up (boots). • The DHCP Server provides the Gateway and DNS addresses to the client, as well as allocating an IP Address. • The Broadband ADSL Route
Resumen del contenido incluido en la página 12
Setup Mode Screen Chapter 4 Use this screen to change the mode between Router mode and Modem (Bridge) mode. PC Configuration 4 This Chapter details the PC Configuration required on the local ("Internal") LAN. Overview For each PC, the following may need to be configured: Figure 13: Mode Screen • TCP/IP network settings • Internet Access configuration Select the desired option, and click "Save". Router Both the ADSL Modem and the Router features are operational. In this Windows
Resumen del contenido incluido en la página 13
PC Configuration Broadband ADSL Router User Guide • On the Gateway tab, enter the Broadband ADSL Router's IP address in the New Gateway Checking TCP/IP Settings - Windows 9x/ME: field and click Add, as shown below. Your LAN administrator can advise you of the IP 1. Select Control Panel - Network. You should see a screen like the following: Address they assigned to the Broadband ADSL Router. Figure 14: Network Configuration 2. Select the TCP/IP protocol for your network card. 3. Click
Resumen del contenido incluido en la página 14
PC Configuration Broadband ADSL Router User Guide Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below. Figure 19: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below. Figure 18: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like
Resumen del contenido incluido en la página 15
PC Configuration Broadband ADSL Router User Guide Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection. 2. Right - click the Local Area Connection icon and select Properties. You should see a screen like the following: Figure 20 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by your ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add button (under DNS Service Search Order),
Resumen del contenido incluido en la página 16
PC Configuration Broadband ADSL Router User Guide 5. Ensure your TCP/IP settings are correct, as described below. Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection. Using DHCP 2. Right click the Local Area Connection and choose Properties. You should see a screen To use DHCP, select the radio button Obtain an IP Address automatically. This is the default like the following: Windows setting. Using this is recommended. By default, the Broadband ADSL Router
Resumen del contenido incluido en la página 17
PC Configuration Broadband ADSL Router User Guide Internet Access To configure your PCs to use the Broadband ADSL Router for Internet access: • Ensure that the DSL modem, Cable modem, or other permanent connection is functional. • Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a Dial-up connection. For Windows 9x/ME/2000 1. Select Start Menu - Settings - Control Panel - Internet Options. 2. Select the Connection tab, and click
Resumen del contenido incluido en la página 18
PC Configuration Macintosh Clients Chapter 5 From your Macintosh, you can access the Internet via the Broadband ADSL Router. The Operation and Status 5 procedure is as follows. 1. Open the TCP/IP Control Panel. This Chapter details the operation of the Broadband ADSL Router and the 2. Select Ethernet from the Connect via pop-up menu. status screens. For Details of operation in Bridge (Modem) mode, see Chap- 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client I
Resumen del contenido incluido en la página 19
Operation and Status Broadband ADSL Router User Guide Data - Status Screen Buttons System Connection Details Click this button to open a sub-window and view a detailed description of the current connection. Device Name The current name of the Router. Attached Devices This will open a sub-window, showing all LAN devices currently Firmware Version The version of the current firmware installed. on the network. Modem Refresh Screen Update the data displayed on screen. Modem Status This
Resumen del contenido incluido en la página 20
Operation and Status Broadband ADSL Router User Guide Connection Status - PPPoE & PPPoA Connection Details - Dynamic IP Address If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following If your access method is "Direct" (no login), with a Dynamic IP address, a screen like the example will be displayed when the "Connection Details" button is clicked. following example will be displayed when the "Connection Details" button is clicked. Figure 27: PPPoE Status Scr
