Resumen del contenido incluido en la página 1
Codian ISDN Gateway
ISDN GW 3201 Series
Getting started
Resumen del contenido incluido en la página 2
Codian ISDN GW ISDN GW 3201 Series Getting started
Resumen del contenido incluido en la página 3
Copyright © Codian 2008. All rights reserved. This Getting Started Guide may not be copied, photocopied, translated, reproduced, or converted into any electronic or machine-readable form in whole or in part without prior written approval of Codian Limited. Codian Limited reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of Codian Limited to provide notification of such revision or change. Codian Limited provides t
Resumen del contenido incluido en la página 4
Table of contents General information ................................................................................................................ 1 About the ISDN gateway .......................................................................................... 1 Package contents ........................................................................................................ 1 Port and LED location .....................................................................................
Resumen del contenido incluido en la página 5
General information General information About the ISDN gateway The ISDN GW 3201 Series is a range of high performance video gateways which enables ISDN network connectivity for the Codian IP-based video infrastructure products as well as IP-based endpoints. Package contents The following items are included with the ISDN gateway. Verify that you have these items before installing the device: Codian ISDN GW 3201 Series device Console cable (blue) Power cable Rack mounting kit Port and LED l
Resumen del contenido incluido en la página 6
LED behavior Table 1 describes the behavior of the LEDs. Table 1: ISDN gateway LED behavior LED ColorIndicates Compact Flash Flashing One of: Activity green the ISDN gateway is booting a configuration change has been made the configuration is being transferred by FTP Console Link Green A PC is connected to the console port Status Green The ISDN gateway is operating normally Alarm Red The ISDN gateway is booting or has developed a fault, for example: temperature is outside normal limits fan
Resumen del contenido incluido en la página 7
General information Table 1: ISDN gateway LED behavior (continued) LED ColorIndicates Ethernet Port Status, for each Ethernet port: FDX Green The link has been negotiated as a full-duplex link Act Green Packets are being transmitted on this port Link Green The speed of the link from this port, which is either 10, 100, or 1000 Mbps Power Blue The ISDN gateway is receiving power 3
Resumen del contenido incluido en la página 8
Connecting the ISDN gateway Before you start IMPORTANT: Before installing the ISDN GW 3201 (ISDN gateway), you must read the safety information at http//www.codian.com/safety.htm Your ISDN connection To reduce the risk of fire, use only 26 AWG or larger telecommunication line cord. Outside North America Check with your network provider to ensure that your incoming ISDN PRI line is terminated in an NTU/CSU (Network Termination Unit/ Channel Service Unit). If it is not, then seek their advice
Resumen del contenido incluido en la página 9
Connecting the ISDN gateway Step one: Connect power Connect the power connector on the rear of the unit to the power supply using the supplied power cable. (There is no On/Off switch.) Step two: Connect to Ethernet Port A Connect an Ethernet cable from Ethernet Port A to an Ethernet switch (rather than a hub, to minimize interference from other devices on the network). The Ethernet port is a 10/100/1000 Mbps auto-sensing connection. Only connect to Ethernet Port A. Ethernet Port B is reserved
Resumen del contenido incluido en la página 10
Initial configuration Step one: Connect to the console port 1 Ensure power is connected to the ISDN gateway and the Status LED is green. 2 Connect the console port of the ISDN gateway to the serial port of your PC using the blue RJ45 to DB9 console cable supplied. 3 Use a serial terminal program, such as Secure CRT or HyperTerminal, to connect to the ISDN gateway. Set your terminal software to the following settings: Baud rate: 38400 Data bits: 8 Parity: none Stop bits: 1 Flow control: n
Resumen del contenido incluido en la página 11
Initial configuration 1 To configure Ethernet Port A, enter the following for auto-sensing mode: ethertype auto or to configure a speed and duplex, use the following command: ethertype <10|100> 2 To display the current configuration and status of the Ethernet ports, enter: status For example, to configure a full-duplex 100Mbps link, enter: ethertype 100 full To establish a 1000Mbps connection, both ends of the link must be i configured as auto-sensing. Step three: Assign an IP add
Resumen del contenido incluido en la página 12
Configuring the ISDN gateway Step one: Log in to the ISDN gateway All administration of the ISDN gateway is performed via the web interface. To log in to the ISDN gateway: 1 Use your browser to navigate to the IP address of the ISDN gateway (to discover the IP address, refer to the previous section). 2Click Change log in and enter the user name admin with no password. Codian recommends that you change the admin account to use a i password as soon as possible. To do that, go to Users, click t
Resumen del contenido incluido en la página 13
Configuring the ISDN gateway Step three: Configure an H.323 gatekeeper If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for callers to make their call. You can configure the ISDN gateway to use an external gatekeeper or its own built-in gatekeeper. To configure the use of an H.323 gatekeeper, go to Settings > Gatekeeper. Typically you may want to add a Dial plan prefix for voice calls (for example 9) and another for video calls (for example 8). For more information r
Resumen del contenido incluido en la página 14
ISDN to IP dial plan setup Options 1 and 2 will automatically handle both voice and video calls. Option 1 - This example assumes that you have a PRI line that has 100 numbers (00 to 99) associated with it and that all your endpoints are registered to a gatekeeper with registrations in the range 5900 - 5999. 1Go to Dial plan > ISDN to IP, and click Add rule. 2For Condition, select Called number matches and enter the correct match for example D*(DD), which will match the last 2 digits of the d
Resumen del contenido incluido en la página 15
Troubleshooting and technical support information Troubleshooting and technical support information Refer to this section if you are experiencing difficulties with the ISDN gateway. Ensure that you have followed the instructions in this guide when installing and configuring the ISDN gateway. Calls fail to complete If outgoing calls fail to complete, check that you have configured the ISDN gateway and all other equipment correctly, paying particular attention to the number you are trying to c
Resumen del contenido incluido en la página 16
Getting more help If the documentation does not answer your question or you have a problem with one of our products: 1 Refer to the Technical FAQ and Troubleshooter sections of the web site. We keep both sections up to date with the latest information from our technical support team regarding the resolution of customer issues. 2 Contact your reseller. Our resellers have a wealth of experience with our products and this is sometimes a quick way of solving a problem. 3 If your query remains un
Resumen del contenido incluido en la página 17
Pin outs Pin outs The pin numbering for the PRI ports on the ISDN gateway is shown in Figure 2. The pin assignments for the PRI ports are shown in Table 2: Table 2: Pin assignments for PRI ports Pin number Signal 1 Receive - 2 Receive + 3 Not connected 4Transmit - 5 Transmit + 6 Not connected 7 Not connected 8 Not connected Figure 2: Pin numbering for PRI ports 8 7 6 5 4 3 2 1 13
Resumen del contenido incluido en la página 18
61-0019-03
