Resumen del contenido incluido en la página 1
s
Quick Start Guide
SIEMENS SL2-141-I
ADSL WLAN Router
• Do never open the housing!
• Use only the power supply provided with this device.
• Use only the cables provided with this device and do not
perform any modifications on them.
05-20070329
Resumen del contenido incluido en la página 2
Before you begin Verify that the following items came with your SIEMENS SL2-141-I kit: SIEMENS SL2-141-I Quick Start Guide CD-ROM Power supply ADSL cable Ethernet cable USB cable (gray) (yellow) (blue) Optional: If your service provider include an ISDN ADSL-Splitter, follow the instructions in section “Step 1: Install the ISDN ADSL-Splitter”. If you need further assistance installing the filter, please contact your service provider. ISDN ADSL-Splitter System Requirements Before starting the inst
Resumen del contenido incluido en la página 3
Step 1: Install the ISDN ADSL Splitter The ADSL technology uses the existing telephone line for the broadband entrance. With the ISDN installation a ISDN ADSL-Splitter must be installed to separate the frequency ranges of ADSL and ISDN and to prevent disturbances at ISDN phones or fax machines. Use for installati- on the provided ISDN ADSL-Splitter. ISDN ADSL-Splitter Important note: - With an ISDN installation only one ISDN ADSL-Splitter is needed for the entire ISDN installation. - For Phones
Resumen del contenido incluido en la página 4
Connect the ADSL WLAN Router to the exchange connection 1. Remove the plug on the telephone or the fax machine from the telephone socket. 2. Insert the ADSL-Splitter into the telephone socket. Plug the plug of the ADSL-Splitter cable (enclosed, mostly black) into the “Phone” (F) plug of the telephone socket and the other plug into the “Line” (Amt) plug of the ADSL-Splitter. 3. Set up the connection between the ADSL-Splitter and the ADSL Modem. To do this, insert the end of the ADSL cable (gray)
Resumen del contenido incluido en la página 5
Step 2: Connect the ADSL WLAN Router via Ethernet interface 1. With your computer off, plug the end of the ADSL cable (gray) into the DSL port of your ADSL WLAN Router. 2a. Connect the Ethernet cable (yellow) to the LAN port of your ADSL WLAN Router. 2b. Connect the other end of the Ethernet cable to the LAN port of your computer. 3. Connect the power supply to your ADSL WLAN Router. 4. Plug the power plug into a power outlet. 5. Turn your computer on and wait until your operating system (OS) is
Resumen del contenido incluido en la página 6
Step 3: USB driver installation The USB driver is only working on the following operating system (OS): Windows 98, Windows 98 SE, Windows ME, Windows 2000 and Windows XP. If your ADSL WLAN Router is NOT equipped with an Ehternet interface you have to install first the USB driver in order to be able to configure your ADSL WLAN Router. For the driver installa- tion proceed as follows: Windows 98 users need the Windows 98 CD-ROM to complete the installation. 1. Insert the SIEMENS installation CD-
Resumen del contenido incluido en la página 7
Step 4: Configure the PC (TCP/IP settings) Introduction In step 4, you will learn how to configure your computer to communicate with the SIEMENS ADSL WLAN Router. To do this, you will need to configure your PC’s network settings to obtain an IP address auto- matically. Computers use IP addresses to communicate with each other across a network or the Internet. Find out which operating system your computer is running, such as Windows 98, Windows ME, Windows NT4, Windows 2000, Windows XP, Windows V
Resumen del contenido incluido en la página 8
Step 4a: Configure the PC (TCP/IP settings) for Windows 98 and Windows ME Windows 98 users need the Windows 98 Installation CD to complete the installa- tion. 1. Click on Start -> Settings -> Control Panel. Double-click on the Network icon to open the Network screen. 2. Select the Configuration tab and highlight the TCP/IP line for the applicable Ethernet 1) adapter . If the word TCP/IP appears by itself, 2) select that line . Click on Properties. 3. Click the IP Address tab and select Obtain a
Resumen del contenido incluido en la página 9
Step 4b: Configure the PC (TCP/IP settings) for Windows NT4 1. Click on Start -> Settings -> Control Panel. Double-click on the Network icon. The Network screen will appear. 2. Select the Protocol tab and highlight the TCP/IP line. Click on Properties. 3. Select the IP Address tab and select Obtain an IP address from a DHCP server and click on OK on the subsequent screens to com- plete the PC’s configuration. 4. When prompted with “Activate DHCP” dialog box, click Yes. 5. Restart your computer.
Resumen del contenido incluido en la página 10
Step 4c: Configure the PC (TCP/IP settings) for Windows 2000 1. Click on Start -> Settings -> Control Panel. Double-click on the Network and Dial-up Connections icon. The Network screen will appear. 2. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first Local Area Connection listed). Double-click on Local Area Connection and click on Properties. 3. Select Internet Protocol (TCP/IP) and click 2 on Properties. 4. Select Obtain an IP address automatica
Resumen del contenido incluido en la página 11
Step 4d: Configure the PC (TCP/IP settings) for Windows XP The following instructions assume you are running Windows XP’s default interface. If you are using the Classical interface (where the icons and menus look like previous Windows ver- sions), please follow the instructions for Windows 2000 (Step 4c). 1. Click on start -> Control Panel. Click on the Network and Internet Connections icon. Click on the Network Connections icon. The Network screen will appear. 2. Select the Local Area Connecti
Resumen del contenido incluido en la página 12
Step 4e: Configure the PC (TCP/IP settings) for Windows Vista 1. Click on start -> Control Panel. Click on the Network and Sharing Center icon. Click on Broadband Connections→ Properties. 2. The “Local Area Connection Status” screen will appear. Click on the Properties button. 3. Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties. 2 4. Select Obtain an IP address automati- cally and click on OK to complete the PC’s configuration. 5. Click on the OK to finish the configura- tio
Resumen del contenido incluido en la página 13
Step 4f: Configure the PC (TCP/IP settings) for Mac OS 9.x 1. From the Apple Menu, point to Control Panels and then click TCP/IP. 2. From the Connect via pull-down menu select Ethernet built-in. From the Configure pull-down menuselect Using DHCP Server. 3. Close the TPC/IP window and click on [Save]. 13
Resumen del contenido incluido en la página 14
Step 4g: Configure the PC (TCP/IP settings) for Mac OS X 1. From the Apple Menu, select System Preferences... 2. Click on the Network icon in the Internet & Network area. 3. From the Show pull-down select Built-in Ethernet. On the TCP/IP tab, select Using DHCP from the Configure pull-down menu. 4. On the PPPoE tab, make sure that the Connect using PPPoE check box is NOT 2 activated. Click Apply Now. 5. Close the Network window. 3 4 14
Resumen del contenido incluido en la página 15
Step 5: Configure the ADSL WLAN Routers (Internet Access) 1. Start your web browser (e.g. Internet Explorer) and type 192.168.1.1 in the address field of the browser. Press Enter. Enter in the field admin and in the field admin as well and click Next>. 2. The Quick Setup window appears: If the Quick Setup page is not displayed, please check the TCP/IP settings of your computer (obtain IP address automatically must be enabled). Find more infor- mation about the configuratio
Resumen del contenido incluido en la página 16
The Quick Setup window appears: 4. Be sure, the Auto Scan Internet Connection (PVC) option is selected. Click Next >. The scanning process will be started and can take several minutes. Afterwards the detected connection will be displayed. 5. Click Next >. 16
Resumen del contenido incluido en la página 17
The Configure Internet Connection - WAN IP Settings window appears: 6. Select Optain an IP address automatically and enable NAT. Type 1492 in the MTU: field and click Next >. The following window appears: 7. For enter the username and for the password. You can get this information from your Internet Service Provider. Select Always On and click Next >. 17
Resumen del contenido incluido en la página 18
8. Take over the settings displayed in the Configure LAN side Settings window and click Next >. The LAN configuration will be started. 9. The window This Internet Connection - Summary shows the WAN and LAN settings you made. The values must match to those values you get from your ISP. Click Finish to accept these settings and to terminate the configuration. 18
Resumen del contenido incluido en la página 19
10.The installation is done and your ADSL WLAN Router will reboot. This will take about 1-2 minutes. 11.The window Connect to Internet appears. If needed, enter the username and password and click Connect>. The connection to the Internet will be established. 19
Resumen del contenido incluido en la página 20
Step 6: Configure the Wireless LAN (WLAN) of your ADSL WLAN Routers Using radio waves, a wireless network introduces some security risks which are not present in a wired network; an unauthorized third party can intercept transmitted data, gain access to your wireless network. In order to make your wireless network as secure as a wired network you should apply, at least, the following guidelines. To guarantee that your data is transmitted in a private manner, you should use the highest possible
