Resumen del contenido incluido en la página 1
SpeedTouch™
605/608/608 WL/620
(Wireless) Business DSL Routers
User’s Guide
Power
Ethernet
WLAN
Plug-in
ISDN
Internet
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
SpeedTouch™ 605/608 608 WL/620 User’s Guide
Resumen del contenido incluido en la página 4
Copyright Copyright ©1999-2005 THOMSON. All rights reserved. Distribution and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. Thomson Teleco
Resumen del contenido incluido en la página 5
Contents Contents About this User’s Guide .............................................. 1 1 Getting to know your SpeedTouch™ .........................3 1.1 SpeedTouch™ LED Behaviour ........................................................ 4 1.2 Accessing your SpeedTouch™ ....................................................... 6 1.2.1 Access via the Web Interface.......................................................................................... 7 1.2.2 Access via CLI......................
Resumen del contenido incluido en la página 6
Contents 4 Basic Configuration ....................................................35 4.1 Navigation.................................................................................... 36 4.1.1 Menu............................................................................................................................... 37 4.1.2 Language Bar ................................................................................................................. 38 4.1.3 Navigation Bar ..............
Resumen del contenido incluido en la página 7
Contents 4.5 Toolbox ........................................................................................ 57 4.5.1 Remote Assistance ........................................................................................................ 58 4.5.2 Game & Application Sharing........................................................................................ 59 4.5.3 Defined Games & Applications..................................................................................... 61 4.5.4 Ga
Resumen del contenido incluido en la página 8
Contents 5.2 SpeedTouch™............................................................................. 102 5.2.1 Easy Setup.................................................................................................................... 103 5.2.2 System Information..................................................................................................... 104 5.2.3 Connections..............................................................................................................
Resumen del contenido incluido en la página 9
Contents 5.7 VPN ............................................................................................ 176 5.7.1 LAN to LAN................................................................................................................... 177 5.7.2 VPN Client..................................................................................................................... 178 5.7.3 VPN Server ...............................................................................................
Resumen del contenido incluido en la página 10
Contents E-DOC-CTC-20051017-0151 v1.0 vi
Resumen del contenido incluido en la página 11
About this User’s Guide About this User’s Guide Used symbols The following symbols are used in this User’s Guide: A note provides additional information about a topic. A tip provides an alternative method or shortcut to perform an action. A caution warns you about potential problems or specific precautions that ! need to be taken. Terminology Generally, the SpeedTouch™605(i), SpeedTouch™608(i), SpeedTouch™608(i) WL and SpeedTouch™620(i) will be referred to as SpeedTouch™ in this User’s Guide.
Resumen del contenido incluido en la página 12
About this User’s Guide E-DOC-CTC-20051017-0151 v1.0 2
Resumen del contenido incluido en la página 13
Chapter 1 Getting to know your SpeedTouch™ 1 Getting to know your SpeedTouch™ Introduction With the SpeedTouch™605(i) and SpeedTouch™608(i) Business DSL Routers and the SpeedTouch™608 WL(i) and SpeedTouch™620(i) Wireless Business DSL Routers you can build a secure small (home-)office network, seamlessly connecting wired and wireless devices and surf the Internet at high speed, all combined in one device. Installation For more information on how to set up, install and wire your SpeedTouch™ an
Resumen del contenido incluido en la página 14
Chapter 1 Getting to know your SpeedTouch™ 1.1 SpeedTouch™ LED Behaviour Front panel LEDs The SpeedTouch™ is equipped with a number of LEDs on its front panel, indicating the state of the device during normal operation. The following table shows the meaning of the different LEDs. Indicator Description Name Colour State Power Green Solid on Power on, normal operation Red Solid on Power on, self-test failed, indicating device malfunction Orange Solid on Bootloader active Off Power off Etherne
Resumen del contenido incluido en la página 15
Chapter 1 Getting to know your SpeedTouch™ Indicator Description Name Colour State Plug-in Green Blinking Data passing through the cardbus Solid on Cardbus is connected, no data passing through Off Cardbus is not connected ISDN Green Blinking ISDN activity Solid on ISDN line connected, no activity Off No ISDN line DSL Green Blinking Pending DSL line synchronisation Solid on DSL line synchronised Off No DSL line Internet Green Blinking Internet activity Solid on Internet connectivity, no activit
Resumen del contenido incluido en la página 16
Chapter 1 Getting to know your SpeedTouch™ 1.2 Accessing your SpeedTouch™ Access methods Your SpeedTouch™ is accessible in one of the following ways: Access Method Can be used to Web browser Configure your SpeedTouch™ via HTTP or HTTPS. For more information, see “1.2.1 Access via the Web Interface” on page 7. Command Line Interface (CLI) Fine-tune your SpeedTouch™ configuration. For more information, see “1.2.2 Access via CLI” on page 8. File Transfer Protocol (FTP) Back up and restore data
Resumen del contenido incluido en la página 17
Chapter 1 Getting to know your SpeedTouch™ 1.2.1 Access via the Web Interface To access the Proceed as follows: SpeedTouch™ via the 1 Open a Web browser. Web interface 2 In the address bar, type your SpeedTouch™’s IP address or DNS host name (http://speedtouch.lan or 192.168.1.254 by default) You can access the pages via HTTP or HTTPS. For remote assistance the secure version HTTPS is used in combination with certificates. Simply provide your ISP with the link as shown, user name and password
Resumen del contenido incluido en la página 18
Chapter 1 Getting to know your SpeedTouch™ 1.2.2 Access via CLI To access the You can access the Command Line Interface (CLI) via: SpeedTouch™ via the The embedded Expert pages. For more information, see “5 Expert Command Line Configuration” on page 99. Interface (CLI) A Telnet session This requires a TCP/IP connection between the host from which the Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the connected computer must have an IP address in the same subnet. The ser
Resumen del contenido incluido en la página 19
Chapter 1 Getting to know your SpeedTouch™ To start a Telnet Proceed as follows: session 1 Open a telnet application. You can use the Command Prompt window. In Microsoft Windows XP for instance: 1 On the Windows taskbar, click Start. 2 Select (All) Programs > Accessories > Command Prompt. 2 Connect to your SpeedTouch™. In the Command Prompt window: At the prompt, type telnet followed by the IP address of your SpeedTouch™ (192.168.1.254 by default). 3 Enter your SpeedTouch™ security user nam
Resumen del contenido incluido en la página 20
Chapter 1 Getting to know your SpeedTouch™ 1.2.3 Access via FTP To access the You can access the file system of the SpeedTouch™ via the File Transfer Protocol (FTP), in order to: SpeedTouch™ via the File Transfer Protocol Restore or back up configuration files, templates or language packs. (FTP) Upgrade your configuration or firmware. File system The SpeedTouch™ file system is stored on non-volatile memory and contains the SpeedTouch™ software, service template files and (optionally) default
