Resumen del contenido incluido en la página 1
Heritage Series ADSL Bridge/ Router
Multi-Mode
ADSL Ethernet Router
Quick Installation Guide
July. 2003
Resumen del contenido incluido en la página 2
Copyright All rights reserved. No part of this document may be reproduced in any form or by any means without written permission from the product manufacturer. Changes are periodically made to the information in this document. They will be incorporated in subsequent editions. The product manufacturer may make improvements and/or changes in the product described in this document at any time.
Resumen del contenido incluido en la página 3
Heritage Series ADSL Bridge/ Router Quick Guide 1 Getting Started This quick guide provides a quick and easy way to install and configure your ADSL Ethernet Router to match which do you need. The major functions of the ADSL Ethernet Router are performed via Ethernet 10/100Base-T network interface. Your computer has to installed an Ethernet NIC card and set up the TCP/IP protocol before start to using your ADSL Ethernet Router. The factory’s default settings of ADSL Ethernet Rou
Resumen del contenido incluido en la página 4
Quick Guide 2 Collect the necessary information You need to gather the connection information supplied by your ADSL service provider. VPI value: ______ VCI value: ______ Encapsulation type: □LLC/SNAP or □VC/MUX For RFC1483 or RFC1577 Host: ______________________ Domain: ___________________ Gateway: __________________ IP address: _______________________ Subnet Mask: _____________________ DHCP Server IP : __________________ DNS Server IP: ____________________ For PPPoA (
Resumen del contenido incluido en la página 5
Heritage Series ADSL Bridge/ Router Quick Guide 3 Hardware Installation 1. Connect the ADSL cable and optional telephone 2. Connect the Ethernet cable 3. Attach the power connector 4. Turn on the ADSL Ethernet router and power up your system. ADSL Ethernet Router 3 1 RS-232C cable AC adapter or Wall outlet Wall jack Straight-through cable 2 to Hub for LAN PCs . Straight-through cable to a PC Stand-alone computer Computer Computer Computer
Resumen del contenido incluido en la página 6
Quick Guide 4 How to login to Web-Configuration? Web-Configuration is designed to work best with Microsoft Internet Explorer® version 5.0, Netscape Navigator® version 4.7, or later versions. Please configure the IP of your computer in the same subnet as ADSL Ethernet Router. The DHCP server of ADSL Ethernet Router is enabled by default. For example: IP: 192.168.7.3, Subnet Mask: 255.255.255.0. Restart your computer if necessary. Open your web browser and fill in the foll
Resumen del contenido incluido en la página 7
Heritage Series ADSL Bridge/ Router Quick Guide 5 The’ System View’ page displays each time you login to the Web-Configuration. How to create your new connection, simply and quickly? Step 1. Login to Web-Configuration, then click Quick Configuration to begin your configure procedures.
Resumen del contenido incluido en la página 8
Quick Guide 6 Step 2. Quick Configuration sub-session will appears several setting items. Please refer to the settings table, which on next page, and choice a connection type which you want. Then fill in the correct settings/values in the fields of Quick Configuration session. Then click Submit button.
Resumen del contenido incluido en la página 9
Heritage Series ADSL Bridge/ Router Quick Guide 7 The settings table for Quick Configuration ATM Interface 0 0 0 0 0 Operation Mode PPPoA PPPoE 1483 Routed IP 1483 Bridged IP 1483 Routed IP (1577) LLC Encapsulation VC-Mux or LLC VC-Mux or LLC VC-Mux or LLC VC-Mux or LLC VPI VCI Bridge IGMP IP address Subnet Mask Default Route Gateway IP Address PPP Username Password Use DNS DNS
Resumen del contenido incluido en la página 10
Quick Guide 8 Step 3. Click Yes to continue. Step 4. Click Admin tab in Web-Configuration screen.
Resumen del contenido incluido en la página 11
Heritage Series ADSL Bridge/ Router Quick Guide 9 Step 5. Click Commit & Reboot tab in the Admin session. Step 6. Click Commit button in Commit & Reboot sub-session.
Resumen del contenido incluido en la página 12
Quick Guide 10 The browser will appear the successful message. Step 7. Choice Reboot From Default Configuration item in Reboot Mode selection in Commit & Reboot sub-session. Then click Reboot button to reboot your ADSL Ethernet Router. Please wait 15 ~ 20 seconds for rebooting procedures, meanwhile don’t turn the power of your ADSL Ethernet Router off. Then click Refresh button, which located in your browser program, to renew your browser screen. Now, your ADSL Ethernet R
Resumen del contenido incluido en la página 13
Heritage Series ADSL Bridge/ Router Quick Guide 11 How to restores the factory’s default settings of ADSL Ethernet Router? You can restore the factory’s default settings of ADSL Ethernet Router, if you needed. Step 1. Login to Web configuration first, then Click Admin tab in the Home session. Step 2. Click Commit & Reboot tab in the Admin session.
Resumen del contenido incluido en la página 14
Quick Guide 12 Step 3. Choice Reboot From Default Configuration item in Reboot Mode selection in Commit & Reboot sub-session. Then click Reboot button to reboot your ADSL Ethernet Router. Please wait 15 ~ 20 seconds for rebooting procedures, meanwhile don’t turn the power of your ADSL Ethernet Router off. Then click Refresh button, which located in your browser program, to renew your browser screen. Now, your ADSL Ethernet Router has been restored to factory’s default se
