Resumen del contenido incluido en la página 1
LAN-to-LAN Routing
for Central-Site and
Branch Office Networks
Model MTASR1-100
User Guide
Resumen del contenido incluido en la página 2
User Guide 88302550 Revision A RouteFinder (Model MTASR1-100) This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 1998, by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Syste
Resumen del contenido incluido en la página 3
Contents Chapter 1 - Introduction and Description Introduction ....................................................................................................................................................... 6 Preview of this Guide .................................................................................................................................. 6 Related Documentation ..........................................................................................................
Resumen del contenido incluido en la página 4
Chapter 6 - Service, Warranty and Tech Support Introduction ..................................................................................................................................................... 50 Limited Warranty ............................................................................................................................................. 50 On-line Warranty Registration................................................................................................
Resumen del contenido incluido en la página 5
Chapter 1 - Introduction and Description
Resumen del contenido incluido en la página 6
RouteFinder MTASR1-100 User Guide Introduction Welcome to Multi-Tech's new RouteFinder™, model number MTASR1-100, an IP/IPX router for interconnecting LANs using switched or dedicated wide area telecommunicaitons links. The MTASR1- 100 provides IP and IPX routing and Media Access Control (MAC) layer bridging for all other protocols over its WAN port. It features a 10Base-T or AUI port for local LAN connection, Command Port for configuration, and an RS-232/V.35 port for asynchronous or synchron
Resumen del contenido incluido en la página 7
Chapter 1 - Introduction and Description Chapter 5 - Remote Configuration and Management Chapter 5 provides procedures for changing the configuration of a remote RouteFinder, located elsewhere on a LAN or at the other end of a modem connection. This chapter also describes typical Telnet client and Web-browser management of the RouteFinder. Chapter 6 - Service, Warranty and Tech Support Chapter 6 provides instructions on getting service for your RouteFinder at the factory, a statement of limited
Resumen del contenido incluido en la página 8
RouteFinder MTASR1-100 User Guide Front Panel The front panel contains three groups of LEDs that provide the status of the LAN connection, WAN Link activity, and general status of the RouteFinder. The Ethernet LEDs display the activity of the LAN whether the RouteFinder is connected to the LAN, transmitting or receiving packets, and if a collision is in progress. The WAN Link LEDs display the status of the link (i.e., ready to transmit or receive serial data and if an external communications d
Resumen del contenido incluido en la página 9
Chapter 1 - Introduction and Description Back Panel The cable connections for the RouteFinder are made at the back panel. Three groups of cables are used on the RouteFinder, the Command Port, WAN link, and the Ethernet. The cable connections are shown in Figure 1-3 and defined in the following groups. 10BASE T COMMAND PORT RS232/V.35 ON OFF 10BASE 2 POWER Figure 1-3. Back Panel RS-232/V.35 Connector The RS-232/V.35 connector is used to connect the RouteFinder to a WAN device. The WAN device c
Resumen del contenido incluido en la página 10
RouteFinder MTASR1-100 User Guide Shunts A shunt on the WAN port allows the same connector to be configured for an ITU-T V.35 electrical interface signaling or EIA-232C/D signaling. The ITU-T V.35 signaling levels are generally more reliable for high speed data and/or longer cable distances. The EIA-232C/D signaling is intended for data rates of 19.2 Kbps or less and cable lengths of 50 feet or less. For higher speeds and/or longer distances, the V.35 is generally preferred. The shunt positions
Resumen del contenido incluido en la página 11
Chapter 1 - Introduction and Description Specifications The RouteFinder conforms to the following specifications. • Routing Protocols - IP and IPX and bridging for all others • Ethernet LAN Interface - 10Base-T (twisted pair) or 10Base2 (ThinNet) BNC • WAN Interface - 1 async or sync link (RS-232C/V.35) • Command Port - 19.2 Kbps Asynchronous • Two 4-megabyte DRAMs (1 meg by 36 bytes at 70 nanosecond SIMMs) Caution: SIMM speed and size cannot be mixed. • 1 MB of Flash memory Ethernet Port • One
Resumen del contenido incluido en la página 12
RouteFinder MTASR1-100 User Guide 12 MTASR1-100
Resumen del contenido incluido en la página 13
Chapter 2 - Installation
Resumen del contenido incluido en la página 14
MADE IN U.S.A RouteFinder MTASR1-100 User Guide Unpacking The shipping box contains the RouteFinder, external power supply, command port adapter cable (short cable with RJ-45 on one end and DB25 on the other), your Quick Start Guide, and three disks (i.e., the RouteFinder User Guide, and the RouteFinder Software). Inspect the contents for signs of any shipping damage. If damage is observed, do not power up the unit; contact Multi-Tech’s Technical Support for advice (refer to Chapter 6). If no da
Resumen del contenido incluido en la página 15
Chapter 2 - Installation Changing Shunt Position The WAN port shunt must be moved to the V.35 position whenever you want to connect the RouteFinder to an external composite link device with a V.35 interface. Do the following. 1. Ensure that the external power supply is disconnected from the RouteFinder. 2. Turn the RouteFinder upside down and remove the cabinet mounting screw at the center back of the cabinet. ® Tech Systems RCV XMT COL ERR PWR LNK RCV XMT CTS RTS CD V35 ETHERNET WAN LINK FAIL P
Resumen del contenido incluido en la página 16
RouteFinder MTASR1-100 User Guide Cabling your RouteFinder Cabling your RouteFinder involves making the proper WAN, Ethernet, Command Port and power connections. Figure 2-4 shows the back panel connectors and the associated cable connections. To connect the cables to your RouteFinder, do the following. 1. If the WAN link needs to be changed to a V.35 interface, perform the “Changing Shunt Position” procedure. RS232/V.35 10BASE T COMMAND PORT ON OFF 10BASE 2 POWER Power Connection WAN Connection
Resumen del contenido incluido en la página 17
Chapter 3 - Software Loading and Configuration
Resumen del contenido incluido en la página 18
RouteFinder MTASR1-100 User Guide Introduction The following loading procedure does not provide every screen or option in the process of installing the RouteFinder software. It is assumed that a technical person with a thorough knowledge of Windows and the software loading process is doing the installation. Loading your Software 1. Run Windows on the PC that is connected to the RouteFinder’s Command Port. 2. Insert the RouteFinder 3.00 Disk 1 into the disk drive on the PC that is connected to th
Resumen del contenido incluido en la página 19
Chapter 3 - Software Loading and Configuration 8. The Port Setup dialog box selects the COM port of the PC that is connected to the Command Port of the RouteFinder. On the Select Port window, click the down arrow and choose the COM port of your PC (COM1 -- COM4) that is connected to the RouteFinder. 9. Click OK to continue. The Setup Complete dialog box is displayed. Click Finish to continue. 10. The “Do you want to perform upgrade?” dialog box is displayed. Click No to skip the upgrade process.
Resumen del contenido incluido en la página 20
RouteFinder MTASR1-100 User Guide Note: Clicking No prevents the defaults from being downloaded to the RouteFinder. You are returned to the program manager, and in Windows 95/NT you will see an open window with shortcut icons for all the various utility programs provided in the RouteFinder software. 12. The “Router is Running. Reboot to download setup?” dialog is displayed. Click Yes. 13. The Novell IPX Protocol Default Setup dialog box is displayed. Note: To configure your RouteFinder, you will
