Resumen del contenido incluido en la página 1
LMS8000 / LMS4000
Feature Support Matrix
End User Modem Feature Support
Features not listed in the following table are similar in all models of End User Modem.
EUM EUM EUM EUM EUM EUM
Feature
3000 3003 3004 3005 3006 8000
1
X
Adaptive Modulation
2
XXX
Autoconfiguration via RADIUS
3
XXX
Automatic Frequency Discovery
4
XXX
CCU8000 Compatibility
5
XXX
DHCP Client
6
XXXX X X
EUM Antenna Alignment Utility
7
XXX
EUM Configuration Utility
8
XXX
Executable Image : “app” series
Executable Filename: “sa1
Resumen del contenido incluido en la página 2
EUM EUM EUM EUM EUM EUM Feature 3000 3003 3004 3005 3006 8000 12 XXXX X X Local Link Address Support 13 XX MDB1000 Installation Tool Support OFDM: Multiple Modulation Schemes from 1.5 X 14 to 13.5 Mbps raw rate 15 XX Outdoor Enclosure 16 XX Power over Ethernet 17 XXX Radio Link Antenna Pointing Tool 18 XXXX RSS (Received Signal Strength) LED 19 XX Secure Authentication 20 X Serial Port 21 XXX Setup Menu 22 XXXX X X Simultaneous voice calls - two 22 X XXX Simultaneous voice calls - more than two
Resumen del contenido incluido en la página 3
8. Different models support different software images with different names. For example, to upgrade the EUM3006 to version 11.3, the file eumv113b2.exe from the WaveRider web site is put to the EUM as eum.exe. See “Upgrading the Network” in LMS8000-LMS4000 Managing the Network for details. 9. See “Antenna Connector” in LMS8000-LMS4000 Radio Networking Concepts and the installation manual for the unit for details. 10.These models support the WaveRider Indoor Switched-beam Diversity Antenna, w
Resumen del contenido incluido en la página 4
Base Station Modem Feature Support Features not listed in the following table are similar in all models of Base Station Modem. Table 1 Base Station Modem Feature Support CCU CCU CCU CCU CCU Feature 3000 3100 3110 8000 8010 1 XX Adaptive Modulation 2 X XXX Antenna diversity control 3 X Executable Image : “app” series Executable Filename: “sa1110.exe” 3 XX Executable Image : “ccu v2x.y” series Executable Filename: “ccu.exe” 3 XX Executable Image : “ccu v4x.y series Executable Filename: “ccu.exe”
Resumen del contenido incluido en la página 5
1. Adaptive Modulation selects the optimal transmit modulation scheme for each link to an EUM. The CCU selects the optimal scheme for each EUM individually, so that EUMs nearby can use high rates and EUMs far away can use low rates simultaneously. See “Adaptive Modulation” in LMS8000-LMS4000 Radio Networking Concepts for details. 2. The diversity mode used for antenna selection can be set in these models. See “Antenna Diversity Mode” in LMS8000-LMS4000 Managing the Network for details 3. Dif
Resumen del contenido incluido en la página 6
The table above applies with version 7.0 software in the CCU3000; version 20.4 software in the CCU3100 and CCU3110; and version 40.1 software in the CCU8000. 6 lms057_ap_01
Resumen del contenido incluido en la página 7
Point to Point Master Station Feature Support Features not listed in the following table are similar in all models of Point to point master. Table 2 Point to Point Master Station Feature Support NCL SL- NCL NCL Feature 1900 900 8000 8010 1 XX Adaptive Modulation 2 XX Antenna diversity control 3 X Executable Image : “app” series Executable Filename: “sa1110.exe” 3 X Executable Image : “ccu v2x.y” series Executable Filename: “ccu.exe” 3 XX Executable Image : “ccu v4x.y series Executable Filename:
Resumen del contenido incluido en la página 8
1. Adaptive Modulation selects the optimal transmit modulation scheme for each link to an EUM. The CCU selects the optimal scheme for each EUM individually, so that EUMs nearby can use high rates and EUMs far away can use low rates simultaneously. See “Adaptive Modulation” in LMS8000- LMS4000 Radio Networking Concepts for details. 2. The diversity mode used for antenna selection can be set in these models. See “Antenna Diversity Mode” in LMS8000-LMS4000 Managing the Network for details 3. D
Resumen del contenido incluido en la página 9
18.These models support a serial port for access to the command line interface. See “Access Interface” in LMS8000-LMS4000 Managing the Network for details. 2 19.Plus solar loading up to 1120 W/m 20.Industry standard IEEE802.11 TKIP Encryption is used to protect user data privacy and integrity. See “Security” in LMS8000-LMS4000 Data Networking Concepts for details. The table above applies with version 7.0 software in the NCL1900; version 20.4 software in the SL-900; and version 40.1 software
Resumen del contenido incluido en la página 10
— This page is intentionally left blank —
