Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
Vigor2100 Series Quick Start Guide Copyright Information Copyright Copyright 2005 All rights reserved. This publication contains Declarations information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. Trademarks The following trademarks are used in this document: • Microsoft is a registered trademark of Microsoft Corp. •
Resumen del contenido incluido en la página 3
whatever extent we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not s
Resumen del contenido incluido en la página 4
European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2100 Series Residential Broadband Routers DrayTek Corp. declares that Vigor2100 series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 89/336/
Resumen del contenido incluido en la página 5
Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inte
Resumen del contenido incluido en la página 6
Table of Contents 1 1. Introduction………………………………………………………….….. 1.1 Brief Overview…………………………………………………………..……… 2 1.2 Specifications………………………………………………………..…………. 3 1.3 Front Panel LEDs and Rear Panel Interfaces………………..……….…… 4 1.4 Package Contains…………………………………………………..…………. 7 8 2. Quick Install Your Vigor2100 Series Router……………..……….. 2.1 Hardware Installation……………………………….……………..………….. 8 2.2 Configure Your Router via Quick Start Wizard…………………..………. 9 PPPoE-type……………………………………………………………….………1
Resumen del contenido incluido en la página 7
1. Introduction Easy Internet-sharing of your broadband connection Robust firewall to help protect your network from external attacks For Vigor2100VG/V: Making regular phone calls over your broadband connection by simply plugging in your phone. QoS-assured VoIP facilities to deliver superior quality. Automatic failover for your Public Switched Telephone Network (PSTN) during power cuts. For Vigor2100VG/G: 802.11g Compliant Wireless LAN access with security f
Resumen del contenido incluido en la página 8
1.1 Brief Overview The Vigor2100 series broadband router/Firewall with a VoIP phone port, an Internet access solution for your LAN, which provides you with the shared web surfing and countless value-added features, such as Firewall, Security, VoIP, and 802.11g Wireless LAN (up to 54Mbps for Vigor2100VG and Vigor2100G only). These are all in a reliable one-box solution. Model comparison chart: Vigor 2100V Vigor2100G Vigor2100VG Broadband * * * Router VoIP * - * Wireless AP - *
Resumen del contenido incluido en la página 9
1.2 Specifications For Vigor2100V/VG For Vigor2100VG/G VoIP (Voice over IP) Wireless Access Point Supports one FXS(phone) port IEEE802.11b/g compliant G.168 line echo-cancellation Wireless client list Gain control Wireless security: Jitter buffer 64/128 bits WEP encryption Voice Codec: G.711 A/µ law, WPA/WPA2* PSK (IEEE802.1i) G.726, G.723.1, G.729 A/B, MAC address access control VAD/CNG Hidden SSID Tone generation and detection: Access point discovery* DTMF, Dial, Busy, Ri
Resumen del contenido incluido en la página 10
1.3 Front Panel LEDs and Rear Panel Interfaces 1.3.1 Vigor2100V LED Status Explanation on The firewall function is active. Firewall blinking When encountering DoS attacks. When detecting one or more user-defined E-mails existing on E-mail blinking mail server. orange A normal 10Mbps connection is through its corresponding port. A normal 100Mbps connection is through its corresponding WAN green port. blinking Ethernet packets are transmitting. Solid light when the handse
Resumen del contenido incluido en la página 11
1.3.2 Vigor2100G LED Status Explanation on The Wireless LAN function is active. WLAN blinking Data packets are transmitted over Wireless LAN. When detecting one or more user-defined e-mails existing on E-mail blinking mail server. orange A normal 10Mbps connection is through its corresponding port. A normal 100Mbps connection is through its corresponding WAN green port. blinking Ethernet packets are transmitting. on The firewall function is active. Firewall blinking Whe
Resumen del contenido incluido en la página 12
1.3.2 Vigor2100VG LED Status Explanation on The Wireless LAN function is active. WLAN blinking Data packets are transmitted over Wireless LAN. When detecting one or more user-defined e-mails existing on E-mail blinking mail server. orange A normal 10Mbps connection is through its corresponding port. A normal 100Mbps connection is through its corresponding WAN green port. blinking Ethernet packets are transmitting. Solid light when the handset of phone is picked up (off h
Resumen del contenido incluido en la página 13
1.4 Package Contains Quick Start Guide CD UK-type power adapter EU-type power adapter USA/Taiwan-type power AU/NZ-type power adapter adapter RJ-45 Cable (Ethernet) RJ-11 Cable for Vigor2100VG/V Antenna for Vigor2100VG/G 7
Resumen del contenido incluido en la página 14
2. Quick Install Your Vigor2100 Series Router 2.1 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. 1. Connect the WAN interface to the external Cable/ADSL modem with a RJ-45 cable. 2. Connect one port of 4-port switch to your computer with a RJ-45 cable. 3. For Vigor2100VG/V, connect Phone port to a conventional analog telephone, either corded or wireless (DECT), with a RJ-11 cable. 4. For Vigor2100VG/V, connect Line port
Resumen del contenido incluido en la página 15
2.2 Configure Your Router via Quick Start Wizard Introduction The Quick Start Wizard is designed for you to easily set up your broadband Internet access. You can directly access the Quick Start Wizard via Web Configurator. Configure Your Router via Quick Start Wizard Open the web browser on a PC which is connected to the router and Step 1. then link to the gateway IP address of the router (the default setting is 192.168.1.1). Once your link (http://192.168.1.1) is successful, a p
Resumen del contenido incluido en la página 16
Now Quick Start Wizard is switched on. Enter login password. Then Step 3. click Next to continue. Select the appropriate TIME ZONE for your location. Step 4. Select the appropriate Internet connection type to your ISP. Step 5 In terms of several Internet connection type, please follow procedures as below: PPPoE users Enter your user name and password provided by your ISP. 10
Resumen del contenido incluido en la página 17
Dial on Demand : The router will ONLY connect to your ISP on demand. By “on demand”, it means when any LAN user attempt to send data onto the Internet. When there is no data traffic, the router will close the connection to the ISP because there is no demand. Idle timeout: This is the time setting If there being no Internet traffic for a period, for example 10 minutes. Always On: The router will keep a permanent connection to the ISP automatically. PPTP users Enter your us
Resumen del contenido incluido en la página 18
client that will ask for the IP network settings from the DHCP server or PPTP-enabled DSL modem. Specify an IP address: If you are not sure whether there are any DHCP services on the WAN interface, you can manually assign an IP address to the interface. Note that the IP Address and Subnet Mask should be assigned within the same network as the PPTP-enabled DSL modem. Static IP Enter the static (fixed or permanent) IP address that your ISP offers to you. WAN IP address: this
Resumen del contenido incluido en la página 19
Review the summary of settings. Step 6 Vigor2100VG/V apply efficient codecs designed to make the best use of available bandwidth. Vigor2100VG/V also equip with automatic QoS assurance. QoS Assurance assists to assign higher priority to voice traffic via Internet for better talking/hearing enjoyment. To achieve that, you will always have the required inbound and outbound bandwidth that is prioritized exclusively for Voice traffic over Internet. Your data will arrive a lit
Resumen del contenido incluido en la página 20
3. Wireless LAN Settings(for G models) This section will guide you to operate the capabilities of Wireless LAN instantly on the router. Please follow the menu tree of the Wireless LAN configuration below to set up wireless function. Wireless LAN >> General Settings Security Access Control Station List The Frequency Domain is set as Europe. (The default value of Frequency Domain was set by factory depends on the reselling region.) 3.1 General Settings Click Gene
