Resumen del contenido incluido en la página 1
D-Link DVG-G5402SP
VoIP Wireless Router
User Manual
Building Networks for People
RECYCLABLE
2007/10/03
Ver. 1.00
Resumen del contenido incluido en la página 2
© 2007 D-Link Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Corporation/D-Link Systems Inc.; Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. D-Link Corporation disclaims any proprietary interest in trademarks and tra
Resumen del contenido incluido en la página 3
Contents 1. Introduction ........................................................................................................................................................ 4 1-1 Product Overview ....................................................................................................................................... 4 1-2 Hardware Description ................................................................................................................................. 5
Resumen del contenido incluido en la página 4
DVG-G5402SP User’s Manual Product Overview 1. Introduction 1-1 Product Overview The DVG-G5402SP is designed to carry both voice and facsimile over the IP network and wirelessly share Internet access. It uses the industry standard SIP call control protocol so as to be compatible with free registration services or VoIP service providers’ systems. As a standard user agent, it is compatible with all common Soft Switches and SIP proxy servers. While running optional serv
Resumen del contenido incluido en la página 5
DVG-G5402SP User’s Manual Telephone Interface Description 1-2 Hardware Description Front Panel Power: Power LED. A steady light indicates a proper connection to a power source. Prov./Alm.: A blinking light indicates the VoIP Router is attempting to connect with the Provisioning server. Once the service connects, the LED will turn off. The LED will light solid if the self-test or boot-up fails. Register: The Register LED will turn on when the VoIP Router is connected t
Resumen del contenido incluido en la página 6
DVG-G5402SP User’s Manual Telephone Interface Description Rear Panel 1. Line: Connect to your original telephone line on the wall jack with RJ-11 cable. 2. Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11). 3. LAN: Connect to your Ethernet enabled computers using Ethernet cabling. 4. WAN: Connect to your broadband modem using an Ethernet cable. 5. Power Receptor: Receptor for the provided power adapter. 6. Ground: A conducting connection wit
Resumen del contenido incluido en la página 7
DVG-G5402SP User’s Manual SETUP 2. Getting Started To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-G5402SP. Open your Web browser and type http://192.168.8.254 into the URL address box. Press the Enter or Return Key. Click Login to enter Web Site. The factory default settings for Login ID is “admin” and without Password. Click Setup Wizard. D-Link Systems, Inc.
Resumen del contenido incluido en la página 8
DVG-G5402SP User’s Manual SETUP Click Next. The username of ADMIN and USER have been defined and locked by default. It is highly recommended to create a login password to keep your router secure. Click Next. Enter a NTP server or use the default server. Click Next. D-Link Systems, Inc. 8
Resumen del contenido incluido en la página 9
DVG-G5402SP User’s Manual SETUP Select your Internet connection type: DHCP – Most Cable ISPs or if you are connecting the DVG-5402SP behind a router. Static IP – Select if your ISP supplied you with your IP settings. PPPoE – Most DSL ISPs. PPTP – Select if required by your ISP. BigPond – For Australia only. Select Manual to manually enter IP address of DNS or select Auto if DNS is assigned by ISP. Click Next. Register to the SIP Proxy Server by
Resumen del contenido incluido en la página 10
DVG-G5402SP User’s Manual SETUP Click on the Enable wireless LAN interface check box to build a wireless network. Enter the SSID to name your wireless network. All devices must have the same SSID to communicate on the wireless network. Select a wireless channel. For best results, use 1, 6 or 11. Select the 802.11 Mode of your network which can work in different speed of wireless connection. Click Next. Setup is finished. Check the summary of you
Resumen del contenido incluido en la página 11
DVG-G5402SP User’s Manual SETUP 3. VoIP Router Web Configuration (continued) During configuration, please follow the Setup Hint for some specific procedure in case the VoIP Router fails to make the changes active. Situation 1: (example: Internet Setup) Setup Hint: 1. Select DHCP WAN Setup. 2. Click “Apply”. 3. Click “Save and Restart” to make change take effect. Situation 2: (example: VoIP Proxy Server) Setup Hint: 1. Click “Edit” to start con
Resumen del contenido incluido en la página 12
DVG-G5402SP User’s Manual SETUP 2. Click “Apply” after settings. 3. Go to “MAINTAINACE”-> “Backup and Restore” save settings and reboot the system. D-Link Systems, Inc. 12
Resumen del contenido incluido en la página 13
DVG-G5402SP User’s Manual SETUP Situation 3: (example: Enable IP Filtering) Setup Hint: 1. Click “Enable IP Filtering” check box to open the main screen. 2. Click “Add” to enter an entry. 3. After Adding an entry, you have to click “Apply”. 4. Don’t forget to click “Apply” which in the filed of “Enable IP Filtering”. 5. After settings, save and reboot. 1 4 2 3 D-Link Systems, Inc.
Resumen del contenido incluido en la página 14
DVG-G5402SP User’s Manual SETUP 3-1 SETUP 3-1-1 Internet Setup WAN (Wide Area Network) Settings are used to connect to your ISP (Internet Service Provider). The WAN settings are provided to you by your ISP and oftentimes referred to as "public settings". Please select the appropriate option for your specific ISP. IP Configuration (Setting WAN Port) There are five methods of obtaining a WAN port IP address: 1. DHCP, which means a Dynamic IP (Cable Modem
Resumen del contenido incluido en la página 15
DVG-G5402SP User’s Manual SETUP SETUP → Internet Setup SETUP → Internet Setup DHCP: Select this option if your ISP (Internet Service Provider) provides you an IP address automatically. Cable modem providers typically use dynamic assignment of IP Address. The Host Name field is optional but may be required by some Internet Service Providers. SETUP → Internet Setup Static IP: Select this option if your ISP (Internet Service Provider) provides
Resumen del contenido incluido en la página 16
DVG-G5402SP User’s Manual SETUP SETUP → Internet Setup PPPoE: Select this option if your ISP requires you to use a PPPoE (Point-to-Point Protocol over Ethernet) connection. Enter the PPPoE Account, PPPoE Password and re-enter Password to confirm. SETUP → Internet Setup PPTP: Point-to-Point Tunneling Protocol (PPTP) is a WAN connection. Enter the IP Address, Subnet mask, PPTP Server, PPTP ID and Password. D-Link Systems, Inc.
Resumen del contenido incluido en la página 17
DVG-G5402SP User’s Manual SETUP SETUP → Internet Setup BigPond: Dynamic IP Address for BigPond is a WAN connection used in Australia. Enter the username and password for the BigPond account and the login server if required. SETUP → Internet Setup Domain Name Server Assignment: Select Auto or Manual to get the IP address of Domain Name Server assigned by ISP or manually. Domain Name Server IP: Enter the primary and secondary IP address of Domain Name
Resumen del contenido incluido en la página 18
DVG-G5402SP User’s Manual SETUP SETUP → Internet Setup Factory Default MAC Address: The original MAC address of the VoIP Router. Your MAC Address: It is left blank as you log-in via the WAN port. Current MAC Address: It shows the current MAC Address if you ever used the different MAC address from Factory Default MAC Address. You can click Clone to automatically copy the MAC address of the Ethernet Card installed in the computer used to configure the dev
Resumen del contenido incluido en la página 19
DVG-G5402SP User’s Manual SETUP SETUP → VoIP Setup Enable Support of SIP Proxy Server / Soft Switch: Check the box to register the VoIP Router with SIP proxy server or soft switch. ITSP Name: Enter the name of ITSP. SETUP → VoIP Setup FXS Representative Number registers to Proxy: Number: Enter the representative number for Line 1 and Line 2. If the VoIP Router is configured to register with SIP proxy server, Line 1 and Line 2 are using this n
Resumen del contenido incluido en la página 20
DVG-G5402SP User’s Manual SETUP SETUP → VoIP Setup Each line registers to Proxy independently: Number: Enter the number, text or number and text in this field. It is the Caller ID for the called party when you make a VoIP call. If you register the VoIP Router to a SIP proxy server, then it should be the number that provided by SIP proxy server. Number and User ID/Account are usually the same from most SIP proxy severs. Each line has a number. And the num
