Resumen del contenido incluido en la página 1
DI-707P
D-Link
TM
Express Ethernetwork
Broadband Router
Manual
Building Networks for People
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Contents Package Contents ................................................................................3 Introduction............................................................................................4 Getting Started ....................................................................................10 Using the Configuration Menu.............................................................. 11 Installing the Print Server Software ....................................................
Resumen del contenido incluido en la página 4
Package Contents Contents of Package: TM D-Link DI-707P Express Ethernetwork Broadband Router Power Adapter – 5V DC Ethernet (CAT5-UTP/Straight-Through) Cable Manual on CD Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DI-707P will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements For Configuration: Ethernet-Based Cable or DSL Mo
Resumen del contenido incluido en la página 5
Introduction The D-Link DI-707P Broadband Router includes 7 ports and a printer port. It provides a complete solution for Internet surfing and office resources sharing. It is an ideal way to extend the reach and number of computers connected to your network. After completing the steps outlined in the Quick Installation Guide (included in your package) you will have the ability to share information and resources, as well as share a printer on your network. The DI-707P is compatible with most p
Resumen del contenido incluido en la página 6
Connections WAN port is the connection for the Pressing the All LAN ports auto-sense cable Ethernet cable to the Reset Button types to accomodate straight- Cable or DSL modem restores the through or cross-over cable. router to its original factory default settings. Printer Port. Most printers will work with Receptor this bi-directional printer port. If you LAN ports provide for the experience difficulties with a multi- connections to Ethernet- Power functional printer, please confirm that you
Resumen del contenido incluido en la página 7
Features & Benefits continued Access Control supported Allows you to assign different access rights for different users Packet filter supported Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and letting them pass or halting them based on the IP address of the source and destination. Virtual Server supported Enables you to expose WWW, FTP and other services on your LAN to be accessible to Internet users. User-Definable Application Sensing
Resumen del contenido incluido en la página 8
Introduction to Firewalls A firewall is a device that sits between your computer and the Internet that prevents unauthorized access to or from your network. A firewall can be a computer using firewall software or a special piece of hardware built specifically to act as a firewall. In most circumstances, a firewall is used to prevent unauthorized Internet users from accessing private networks or corporate LAN's and Intranets. A firewall watches all of the information moving to and from your netwo
Resumen del contenido incluido en la página 9
Introduction to Virtual Private Networking Virtual Private Networking (VPN) uses a publicly wired network (the Internet) to se- curely connect two different networks as if they were the same network. For example, an employee can access the corporate network from home using VPN, allowing the employee to access files and printers. Here are several different implementations of VPN that can be used. Point-to-Point Tunneling Protocol (PPTP) PPTP uses proprietary means of connecting two private networ
Resumen del contenido incluido en la página 10
LEDS LED stands for Light-Emitting Diode. The DI-707P has the following LEDs as described below: LED Activity LED A steady light indicates Power a connection to a power sourcea power source Flashes once per second to indicate an M1 LED active system Lights up when the device has an Internet M2 LED connection A solid light indicates connection on the WAN WAN port. This LED blinks during data transmission LAN This LED blinks during data transmission A solid light indicates a connection to an LO
Resumen del contenido incluido en la página 11
Getting Started With its default settings, the DI-707P, when activated, will connect with other D-Link Express Ethernetwork products, right out of the box. 1 Please refer to the following 2 sections of this manual for additional information about setting up a network: 5 Networking Basics - learn how to check and assign your IP Address; share printers and 4 files. Using the Configuration Menu - learn the settings for the DI-707P, using the web- 3 6 based interface. For a typical network setup at
Resumen del contenido incluido en la página 12
Using the Configuration Menu Whenever you want to configure your network or the DI-707P, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DI-707P. The DI-707P default IP Address is shown below: Open the web browser Type in the IP Address of the DI-707P http://192.168.0.1 Note: if you have changed the default IP Address assigned to the DI-707P, make sure to enter the correct IP Address. The factory default User name is admin and the defaul
Resumen del contenido incluido en la página 13
Using the Configuration Menu Home > WAN Choose WAN Type WAN stands for Wide Area Network. In this case WAN represents the mode in which you connect to the Internet. If you are uncertain, please ask your ISP which of the following represents your connection mode to the Internet: Dynamic IP Address- Obtain an IP address from your ISP automatically (mainly for Cable users) Your ISP assigns you a Static IP Address Static IP Address- PPP over Ethernet- Some ISPs require the use of PPPoE to connect
Resumen del contenido incluido en la página 14
Using the Configuration Menu Home > WAN > Dynamic IP Address Most Cable modem users will select this option to obtain an IP Address automatically from their ISP (Internet Service Provider). Host Name- This is optional, but may be required by some ISPs. The host name is the device name of the Router. Enable this feature to allow the router to automatically recon- Renew IP Forever- nect to the ISP if the connection drops. MAC Address- The default MAC Address is set to the WAN’s physical inter- f
Resumen del contenido incluido en la página 15
Using the Configuration Menu Home > WAN > Static IP Address If you use a Static IP Address, you will input information here that your ISP has provided to you. WAN IP Address- Input the IP Address provided by your ISP Input the Subnet Mask provided by your ISP WAN Subnet Mask- WAN Gateway- Input the Gateway address provided by your ISP Primary DNS- Input the primary DNS address provided by your ISP Secondary DNS- (Optional) Input the Secondary DNS address provided by your ISP. 14
Resumen del contenido incluido en la página 16
Using the Configuration Menu Home > WAN > PPPoE Most DSL users will select this option to obtain an IP address automatically from their ISP through the use of PPPoE. PPPoE Account- Your PPPoE username is provided by your ISP Your PPPoE password is provided by your ISP PPPoE Password- Primary DNS- You will get the DNS IP automatically from your ISP but you may enter a specific DNS address that you want to use instead. Secondary DNS- (Optional) Input the secondary DNS address Maximum Enter a maxim
Resumen del contenido incluido en la página 17
Using the Configuration Menu Home > WAN > PPTP Point-to-Point Tunneling Protocol (PPTP) is a WAN connection used in Europe. My IP Address- Enter the IP Address My Subnet Mask- Enter the Subnet Mask Server IP Address- Enter the Server IP Address PPTP Account- Enter the PPTP account name PPTP Password- Enter the PPTP password (Optional) Enter the connection ID if required by your ISP Connection ID- Maximum Enter a maximum idle time during which Internet connection is maintained during inactivity.
Resumen del contenido incluido en la página 18
Using the Configuration Menu Home > WAN > BigPond Cable Dynamic IP Address for BigPond is a WAN connection used in Australia. Account- Enter in the username for the BigPond account Enter the password for the BigPond account Password- (Optional) enter the Login Server name if required Login Server- Renew IP forever- If enabled, the device will automatically connect to your ISP after your unit is restarted or when the connection is dropped. 17
Resumen del contenido incluido en la página 19
Using the Configuration Menu Home > LAN LAN is short for Local Area Network. This is considered your inter- nal network. These are the IP settings of the LAN interface for the DI-707P. These settings may be re- ferred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your inter- nal network and can- not be seen on the Internet. DHCP stands for Dynamic Host Control Protocol. The DI-707P has a built-in DHCP server. The DHCP Server will automatica
Resumen del contenido incluido en la página 20
Using the Configuration Menu Advanced > Virtual Server The DI-707P can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-707P firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DI-707P are invisible to the outside world. If you wish, you can make some of the LAN computers accessible fro
