Resumen del contenido incluido en la página 1
Cisco 1750 Router Hardware
Installation Guide
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Customer Order Number: DOC-786169=
Text Part Number: 78-6169-02
Resumen del contenido incluido en la página 2
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE I
Resumen del contenido incluido en la página 3
CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering the Internet Generatio
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
CONTENTS About This Guide ix Audience and Scope x Organization x Related Publications x Conventions xi Notes, Cautions, and Warnings xi Commands xiv CHAPTER 1 Cisco 1750 Router Overview 1-i Key Features 1-ii Rear-Panel Ports and LEDs 1-iv Front-Panel LEDs 1-vi Router Memory 1-ix Types of Memory 1-ix Amounts of Memory 1-x Unpacking the Router 1-xi Additional Required Equipment 1-xi CHAPTER 2 Installation 2-i Before Installing the Router 2-i Connecting the Router to Your Local Network 2-ii Install
Resumen del contenido incluido en la página 6
Contents Connecting Power to the Router 2-viii Verifying Your Installation 2-x Optional Installation Steps 2-x Connecting a PC 2-xi Connecting a Modem 2-xiii Wall-Mounting 2-xiv CHAPTER 3 Troubleshooting 3-i Contacting Cisco or Your Reseller 3-i Recovering a Lost Password 3-ii Changing the Configuration Register 3-ii Resetting the Router 3-iv Resetting the Password 3-v Resetting the Configuration Register Value 3-vi Problem Solving 3-vi OK LED Diagnostics 3-vii Troubleshooting WICs and VICs 3-vi
Resumen del contenido incluido en la página 7
Contents APPENDIX C Installing and Upgrading Memory and Data Modules C-i Safety Information C-i Opening the Chassis C-iii Locating Modules C-v Installing a Mini-Flash Module C-vi Removing a Mini-Flash Module C-vi Installing a Dual In-Line Memory Module C-ix Installing a Packet Voice Data Module C-x Closing the Chassis C-xi INDEX Cisco 1750 Router Hardware Installation Guide 78-6169-02 vii
Resumen del contenido incluido en la página 8
Contents Cisco 1750 Router Hardware Installation Guide 78-6169-02 viii
Resumen del contenido incluido en la página 9
About This Guide This section discusses the intended audience, scope, and organization of the Cisco 1750 Router Hardware Installation Guide and defines the conventions used to convey instructions and information. You can access Cisco documentationand additional literature on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com. If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click
Resumen del contenido incluido en la página 10
About This Guide Audience and Scope Audience and Scope This guide is for users who have some experience installing and maintaining networking hardware. We assume that Cisco 1750 router users are familiar with the terminology and concepts of local Ethernet and wide-area networking. This guide describes the functional and physical features of the Cisco 1750 router and provides installation procedures, troubleshooting information, technical specifications, and cable and connector guidelines and
Resumen del contenido incluido en la página 11
About This Guide Conventions Cisco 1700 Router Software Configuration Guide describes some common network scenarios and how to use the Cisco IOS command-line interface (CLI) to configure the router in these scenarios. Cisco 1750 Router Voice-over-IP Configuration Guide provides instructions on how to use Cisco IOS software to configure voice interfaces. Cisco WAN Interface Cards Hardware Installation Guide describes how to install and configure the WICs and VICs that are supported by
Resumen del contenido incluido en la página 12
About This Guide Conventions Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with the standard practices for preventing accidents. Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
Resumen del contenido incluido en la página 13
About This Guide Conventions Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på de faremomentene som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com
Resumen del contenido incluido en la página 14
About This Guide Conventions Commands Table 1 describes the syntax used with the commands in this document. Table 1 Command Syntax Guide Convention Description boldface Commands and keywords. italic Command input that is supplied by you. [ ] Keywords or arguments that appear within square brackets are optional. {x | x | x} A choice of keywords (represented by x) appears in braces separated by vertical bars. You must select one. ^ or Ctrl Represent the key labeled Control. For example, when yo
Resumen del contenido incluido en la página 15
1 Cisco 1750 Router Overview This chapter introduces the Cisco 1750 router, also referred to in this guide as “the router,” and covers the following topics: Key Features Rear-Panel Ports and LEDs Front-Panel LEDs Router Memory Unpacking the Router Additional Required Equipment Figure 1 shows the Cisco 1750 router. Cisco 1750 Router Hardware Installation Guide 78-6169-02 i
Resumen del contenido incluido en la página 16
SLOT0 SLOT1 SLOT2 ETH PWR PORT0 PORT0 PORT0 ACT COL OK PORT1 PORT1 PORT1 Cisco 1700 SERIES ROUTER Key Features Figure 1 Cisco 1750 Router Key Features The Cisco 1750 router is a voice-and-data capable router that provides Voice-over-IP functionality (VoIP) and can carry voice traffic (for example, telephone calls and faxes) over an IP network. Using one to four WAN connections, the router links small-to-medium-size remote Ethernet and FastEthernet LANs to central offices. Table 1 lists the r
Resumen del contenido incluido en la página 17
Key Features Table 1 Key Features (continued) Feature Description Cisco interface cards Supports two slots for either WAN interface cards (WICs) or voice interface cards (VICs). Supports one VIC-only slot. Supports the following WICs: ISDN BRI (U and S/T), 56- or 64-kbps DSU/CSU, FT1/T1 DSU/CSU, high-speed serial, dual-serial, and 2Async/Sync. Supports the following VICs: 2FXS, 2FXO, 2E&M. Changes in WAN interface configuration can be made as your network requirements change. Conso
Resumen del contenido incluido en la página 18
Rear-Panel Ports and LEDs Rear-Panel Ports and LEDs This section describes the router rear-panel ports and LEDs, which are shown in Figure 2 and described in Table 2 and Table 3. Figure 2 Rear-Panel Components and LEDs Kensington-compatible WIC/VIC VIC Power switch locking socket slot 1 slot 2 Console port Cisco 1750 SLOT 2 SLOT 1 VIC VIC 2FXS 2FXO 1 0 1 0 SEE MANUAL BEFORE INSTALLATION SEE MANUAL BEFORE INSTALLATION THIS SLOT ACCEPTS ONLY VOICE INTERFACE CARDS CONSOLE SLOT 0 SLOT 1 OK SLOT 0
Resumen del contenido incluido en la página 19
Rear-Panel Ports and LEDs Table 2 Rear-Panel Connectors (continued) Connector/Slot Label/Color Description WIC/VIC slot SLOT 0 Supports either a Cisco WIC or VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card. WIC/VIC slot SLOT 1 Supports either a Cisco WIC or VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card. VIC slot SLOT 2 Supports one Cisc
Resumen del contenido incluido en la página 20
SLOT2 ETH SLOT0 SLOT1 PORT0 ACT PORT0 PORT0 PWR COL PORT1 PORT1 PORT1 OK Front-Panel LEDs Table 3 Rear Panel LEDs (continued) LED Label Color Description SLOT 2 OK Green On when a VIC is correctly inserted in the card slot. PVDM OK Green On when a packet voice data module (PVDM) is correctly inserted in the card slot. Front-Panel LEDs Use the router front-panel LEDs to determine network activity and status on the Ethernet port and on the WIC and VIC ports. The front-panel LEDs are illustrated
