Manual de instrucciones de American Power Conversion WMR1000G

Resumen del contenido incluido en la página 1

• Documentation CD Step 1a - Connect Power (USB) Step 2 - Network Connection
System Requirements
®
• Universal Serial Bus (USB) Power Cable
To use the Wireless Mobile Router, required system
Power the Wireless Mobile Router using the USB cable Connect a DSL or cable modem on an existing
elements are as follows:
Please contact the reseller if any of the listed items are
(provided), as follows: network to the Ethernet port of the APC 3-in-1
missing from the packaging. ® ®
• A computer that

Resumen del contenido incluido en la página 2

6. If the admin password was set on the 5. In the Location or Address bar, enter http:// and 3. Establish a wired or wireless connection to the Troubleshooting System screen, a prompt appears for the the current IP address for the wireless LAN, as set router (Wired is recommended whenever possible). Before contacting Technical Support, please refer to the username and password. Enter Admin on the AP/Router screen. The default value is For wired, connect a stan