Resumen del contenido incluido en la página 1
Internal
Fax Modem 56K
Quick Installation Guide
Resumen del contenido incluido en la página 2
FCC REGULATORY STATEMENTS FCC Part 68 Registration This device complies with FCC Part 68 rules, and the use of this device is subject to the following restrictions: 1. The FCC has established rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones. 2. If this device is malfunctioning, it may also be causing harm to the telephone network; this
Resumen del contenido incluido en la página 3
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver Connect the equipment i
Resumen del contenido incluido en la página 4
HARDWARE INSTALLATION Precautions: Please be sure you take adequate anti-static precautions when handling this product. The simplest way to achieve this is; before you begin and every minute or so during the hardware installation touch a non-painted surface of the computer’s chassis. 1. Before installing the device, make sure the computer is turned off. 2. Remove the expansion slot cover from the computer. 3. Carefully slide the PCI modem card into an available PCI slot, push i
Resumen del contenido incluido en la página 5
SOFTWARE INSTALLATION Windows 98 Installation 1. Restart the computer system after the modem is correctly plugged into the PCI slot of your computer. Windows will automatically detect the device. Click Next. 2. When the following dialog box appears, insert the device driver compact disc into your CD-ROM drive and click Next. 3. Select Specify a location and press Browse to choose the folder driver/win98 in your CD-ROM drive. Then click Next. - 2 -
Resumen del contenido incluido en la página 6
4. Click Next to continue. 5. When the following figure appears, click Finish. The Installation program will continue. - 3 -
Resumen del contenido incluido en la página 7
6. Follow the on-screen instructions to proceed. 7. The program will proceed automatically. Click Finish to complete software installation. Windows 2000 Installation Restart the computer system after the modem is properly plugged into the PCI slot of your - 4 -
Resumen del contenido incluido en la página 8
computer. Windows 2000 will automatically detect the device. If you want to use the Microsoft built-in driver, execute d:\Driver\Win2000\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer. 1. Go to Control Panel, double-click System. Select Hardware. Click Device Manager. 2. Right-click LT Win Modem. Select Properties. - 5 -
Resumen del contenido incluido en la página 9
3. Select Driver. Click the Update Driver…button. 4. Follow the on-screen instructions to proceed. (Click Next to continue.) 5. Load the Compact Disc that contains the device driver into your CD-ROM drive. - 6 -
Resumen del contenido incluido en la página 10
Click Browse and select the proper file location with the disc drive followed by Driver\Win2000. 6. Check Install one of the other drivers. Click Next. 7. Select d:\Driver\Win2000\ltmdmnt.inf, click Next. - 7 -
Resumen del contenido incluido en la página 11
8. When Windows prompt you to continue the installation. Select Yes. 9. Click Finish to complete the software installation. Windows ME Installation Restart the computer system after the modem is properly plugged into the PCI slot of your - 8 -
Resumen del contenido incluido en la página 12
computer. Windows ME will automatically detect the device. If you want to use the Microsoft built-in driver, execute d:\Driver\WinME\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer. 1. Right-click My Computer, then click Properties Device Manager. 2. Click WDM Modem Enumerator to expand. 3. Load the device driver into your CD-ROM drive. Click Properties Driver Update Driver. - 9 -
Resumen del contenido incluido en la página 13
4. Select Specify the location of the driver (Advanced) and click Next. - 10 -
Resumen del contenido incluido en la página 14
5. Select Display a list of all the drivers…and click Next. 6. Click the Have Disk…button. 7. Click Browse to select the drive where the device driver exists. (for example: D:\) - 11 -
Resumen del contenido incluido en la página 15
Enter the CD-ROM driver letter followed by driver\Win_ME. 8. Click Next. 9. Click Next to proceed. - 12 -
Resumen del contenido incluido en la página 16
10. Click Finish to complete the software installation. Note: Windows ME users who experience low connection speeds to their Internet provider can apply a driver update to improve speeds. To do this, insert the modem driver CD, (you will need to press Exit when the PICShell software installation utility starts). Click on Start, Programs, Windows Explorer. Now explore the CD-ROM by opening the Driver folder, then Win_Me_faster. Double-click on Driver_update.exe, this will lea
Resumen del contenido incluido en la página 17
modem. Perform the following procedures to install the driver. 1. Load the device driver CD into your CD- ROM drive. Close the window that automatically pops up. 2. Go to Start Run. Click Browse to direct your system to the location where contains the device’s driver (e.g., E:\Driver\Win 2000&XP\Setup). Click OK. 3. Click OK to install the driver. 4. When the following window appears, click Continue Anyway to complete the software installation. - 14 -
Resumen del contenido incluido en la página 18
5. Go to Start Run, enter “regedit”, and click OK. 6. Select HKEY_LOCAL_MACHINE, and click SOFTWARE to expand. If the Lucent and Modem are listed as below, the modem exists and is successfully enabled. If not, consult your distributor for the technical support. - 15 -
Resumen del contenido incluido en la página 19
Windows NT Installation 1. Reboot the computer system after the modem is correctly plugged into your PCI slot of computer. 2. Load the device driver compact disk in the CD-ROM drive. 3. Start Windows NT. 4. Go to My Computer. 5. Click the CD-ROM drive. Click the driver\winnt folder. Or you may click the Browse button to select the CD-ROM drive and the driver\winnt folder. 6. Double-click setup.exe. The installation program will proceed automatically. - 16 -
