Resumen del contenido incluido en la página 1
PCMCIA
Fax Modem 56K
Quick Installation Guide
M73-APO02-390
Resumen del contenido incluido en la página 2
REGULATORY STATEMENTS FCC Part 68 Registration The high speed PC card FAX/MODEM is registered with the FCC as compliant with the rules of Part 68, and use of this modem is subject to the following restrictions: 1. The Federal Communication Commission FCC has established rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones. 2. If this device is
Resumen del contenido incluido en la página 3
HARDWARE INSTALLATION 1. Locate the PCMCIA slot of your system. 2. Align the PCMCIA FAX MODEM 56K PC Card toward the PCMCIA slot. Push evenly and steadily until it is seated. Notebook Connects to RJ-11 phone jack 3. Connect the other end of the PC Card cable to the telephone line outlet. 4. You are now ready to continue the software installation. CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. For Windows NT does not support
Resumen del contenido incluido en la página 4
SOFTWARE INSTALLATION Installation for Windows 98 1. As soon as the PCMCIA Fax Modem 56K PC is inserted into the PCMCIA slot, Windows automatically detects the new hardware device and the following message will be prompted. 2. Insert the device driver compact disc into your CD-ROM drive. Click Next. 3. Select Specify a location when the following figure appears. Enter the CD- ROM drive letter followed by driver\win98. Click Next. Or you may click the Browse button to select the d
Resumen del contenido incluido en la página 5
9. The installation program will proceed automatically. Click Finish to complete the installation. Installation for Windows 2000 If you want to use the Microsoft built-in driver, make sure to execute d:\Driver\Win2000\ PAR.exe. Or perform the following procedures to update the latest driver. 1. Once the PCMCIA Fax Modem 56K PC Card is plugged into your PCMCIA slot, Windows will prompt you a standard PCMCIA Card Modem has been installed and ask you if you want to restart your co
Resumen del contenido incluido en la página 6
4. Select the Driver tab. Click the Update Driver…button. 5. Click Next to continue. 6. Select Display a list of the known drivers for this device so that I can choose a - 4 -
Resumen del contenido incluido en la página 7
specific driver as illustrated below. And click Next. 7. Click Have Disk when the following dialog box appears. 8. Load the CD that contains the device driver into your CD drive. Click Browse and direct the proper file location with the disk drive followed by Driver\Win2000\LTW2KG. - 5 -
Resumen del contenido incluido en la página 8
9. Select LTW2KG, and click Open. Follow the on-screen instructions to proceed. 10. When the following figure appears, click Next. 11. When Windows prompt you an Update Driver Warning message. Select Yes. - 6 -
Resumen del contenido incluido en la página 9
12. Click Next to continue. 13. Click Yes to continue at the Digital Signature Not Found screen. 14. Click finish to complete the installation. - 7 -
Resumen del contenido incluido en la página 10
15. Remember to restart your computer to activate this new device. Installation for Windows Millennium If you want to use the Microsoft built-in driver, make sure to execute d:\Driver\WinME\PAR.exe. Or perform the following procedures to update the latest driver. 1. Once the PCMCIA Fax Modem 56K PC Card is plugged into the PCMCIA slot of your system, Windows will automatically detect the Lucent Win Modem. 2. To update WDM Communication Device driver, right-click My Computer P
Resumen del contenido incluido en la página 11
4. Load the device driver into the CD-ROM drive of your system. Click Properties Driver Update Driver. 5. Select Specify the location of the driver (Advanced) and click Next. 6. Select Display a list of all the drivers…and click Next. 7. Click the Have Disk…button. Click Browse to select the CD-ROM drive where you put the device driver. (for example: D:\) Enter the CD-ROM driver letter followed by Driver\WinME. - 9 -
Resumen del contenido incluido en la página 12
8. Click Next. 9. Click Next to proceed. 10. Click OK to finish the installation. 11. Go back to step 2. Click Modem to expand. 12. Load the device driver into the CD-ROM drive of your system. Click Properties Driver Update Driver. 13. Select Specify the location of the driver (Advanced) and click Next. 14. Select Display a list of all the drivers…and click Next. 15. Click the Have Disk…button. Click Browse to select the CD-ROM drive where you put the device driver. (for
Resumen del contenido incluido en la página 13
Installation for Windows XP 1. Once the device is well inserted into your PCMCIA slot, windows will prompt you the following message. Insert the device driver CD (or diskette). Select install the hardware automatically … and click next. 2. Select the device you inserted and click next. 3. Click Continue Anyway. Then windows will start to copy the appropriate driver into your system. 4. Click finish to complete the software installation. - 11 -
Resumen del contenido incluido en la página 14
5. To verify if the device exists in your system, go to Start Control Panel System Hardware Device Manager. Check if the device is listed. If not, contact your dealer for technical support. Installation for Windows NT 1. Before you start Windows NT, make sure the PCMCIA Fax Modem 56K PC Card has been properly inserted into the free PCMCIA slot of your computer. 2. Load the device driver compact disk in the CD-ROM drive. 3. Start Windows NT. 4. Go to My Computer. 5. Click t
