Manual de instrucciones de Sony DDU1681S

Resumen del contenido incluido en la página 1

PLEASE NOTE: AS PC DESIGN AND FEATURES VARY AMONG
MANUFACTURERS (AND MANUFACTURER MODELS), THIS
INSTALLATION GUIDE MAY NOT BE APPLICABLE TO YOUR PC.
ACCORDINGLY, PRIOR TO INSTALLATION, PLEASE CONSULT YOUR PC
OWNERS MANUAL.

Installation Quick Start Guide:

Hardware system requirements: Intel Pentium III 800 MHz and 256 MB memory

Installation procedure:
1. With the computer shut down disconnect all cables plugged into the computer.


2. Open up your computer. Remove the compute

Resumen del contenido incluido en la página 2

3. Touch a non-painted metal surface (i.e. the power supply) to ground yourself. You can damage the components inside the computer if you do not ground yourself. 4. Connect the cables. (Make sure the shape of the connectors match.) 1) Serial ATA connector 2) Serial ATA power connector 3) Serial ATA cable 4) Serial ATA power cable CAUTION: Using the wrong type of cable with this product can cause it to malfunction. Follow the instructions when connecting the product. Use

Resumen del contenido incluido en la página 3

7. Connect the power cable to the drive. These are the multicolored cables extending from the power source inside the computer. 8. Check to make sure the connections between the drive and the computer are firm. Reconnect the peripheral cables and then the power cables. Start your computer.

Resumen del contenido incluido en la página 4

9. Ensure the drive is detected by the Windows operating system. 10. Then replace the computer’s cover.