Resumen del contenido incluido en la página 1
SIRIUS Motor Starter
M200D AS-Interface Basic
•
Manual 03/2009
SIRIUS
Answers for industry.
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Introduction / product 1 description 2 Product family 3 Functions SIRIUS 4 Installation / connection Motor starter Configuration / 5 parameterization M200D AS-Interface Basic 6 Commissioning Manual 7 Diagnostics 8 Technical specifications A Appendix 03/2009 A5E01668085-01
Resumen del contenido incluido en la página 4
Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if
Resumen del contenido incluido en la página 5
Table of contents 1 Introduction / product description............................................................................................................... 9 1.1 What are M200D distributed motor starters?.................................................................................9 1.2 Fieldbus interfaces.......................................................................................................................11 1.2.1 AS-Interface ...............................
Resumen del contenido incluido en la página 6
Table of contents 3.12 Solid-state/mechanical switching technology.............................................................................. 42 3.13 Local device interface ................................................................................................................. 43 3.14 Integrated manual local control................................................................................................... 44 4 Installation / connection ................................
Resumen del contenido incluido en la página 7
Table of contents 8 Technical specifications........................................................................................................................... 89 8.1 General technical specifications ..................................................................................................89 8.2 Motor starter.................................................................................................................................90 8.3 Brake control.................
Resumen del contenido incluido en la página 8
Table of contents M200D AS-Interface Basic 8 Manual, 03/2009, A5E01668085-01
Resumen del contenido incluido en la página 9
1 Introduction / product description 1.1 What are M200D distributed motor starters? M200D motor starters are standalone devices with a high degree of protection (IP65) for distributed use near the motor. Depending on the order variant, they are available as: ● Direct starters, electromechanical or electronic (DSte, sDSte) ● Reversing starters, electromechanical or electronic (RSte, sRSte) They are suitable for the following tasks: ● Switching and protecting three-phase loads at 400 V
Resumen del contenido incluido en la página 10
Introduction / product description 1.1 What are M200D distributed motor starters? Connecting the M200D motor starter to AS-Interface Figure 1-1 M200D: overview M200D AS-Interface Basic 10 Manual, 03/2009, A5E01668085-01
Resumen del contenido incluido en la página 11
Introduction / product description 1.2 Fieldbus interfaces 1.2 Fieldbus interfaces 1.2.1 AS-Interface Overview The AS-Interface (actuator sensor interface, AS-i) is an open international standard for fieldbus communication between distributed actuators and sensors at the lowest control level. AS-i complies with the IEC 61158 / EN 50295 standards and was specifically designed for connecting binary sensors and actuators that comply with these standards. AS-i makes it possible to rep
Resumen del contenido incluido en la página 12
Introduction / product description 1.2 Fieldbus interfaces Further information ● Catalogs, customer magazines, and brochures are available on the Internet (http://www.automation.siemens.com/net/html_00/support/presales.htm) ● Brochure "Industrial communication for automation" (http://www.automation.siemens.com/download/internet/cache/3/1462730/pub/en/bs_k- schrift_en_0408.pdf) (Introductory information about industrial communication): ● Catalog IK PI 2009 "Industrial Communication for
Resumen del contenido incluido en la página 13
2 Product family 2.1 Motor starter M200D AS-Interface The following motor starters with AS-Interface (AS-i) are available: ● M200D AS-i Basic motor starter with thermistor motor protection + electronic motor model: – Direct starter (electromechanical) (DSte) up to 5.5 kW, Current ranges: 0.15 – 2 A and 1.5 – 12 A – Reversing starter (electromechanical) (RSte) up to 5.5 kW, Current ranges: 0.15 – 2 A and 1.5 – 12 A – Direct starter (electronic) (sDSte) up to 4 kW, Current rang
Resumen del contenido incluido en la página 14
Product family 2.2 Overview of the device functions 2.2 Overview of the device functions Device functions Electromechanical (DSte, RSte)/ electronic (sDSte, sRSte) Fieldbus interface ● Control function: reversing starter ○ Control function: soft starter — Brake output 400 V / 230 V AC ○ Brake output 180 V DC ○ Thermal motor model ● Temperature sensor (thermistor motor protection) ● Asymmetry monitoring ● Blocking current monitoring ● Zero-current monitoring ● M12 inputs (rout
Resumen del contenido incluido en la página 15
Product family 2.3 Design concept 2.3 Design concept Connections and controls on the motor starter 0,6 0,4 0,8 0,3 1 1,2 0,2 1,5 CLASS 1,8 0,15 OFF 2A le ① Disconnecting means (circuit breaker), can be locked ② Optical device interface ③ M12 AS-i connection ④ Diagnostic LEDs ⑤ Cover (setting elements) ⑥ M12 output ⑦ M12 inputs ⑧ Protection guard for cables and connections (accessories) ⑨ Fixing holes for installation ⑩ 400 V infeed ⑪ Motor connection
Resumen del contenido incluido en la página 16
Product family 2.3 Design concept 2.3.1 Operator controls The motor starter is equipped with the following operator controls: ① Key-operated switch (order variant) ② Keypad (order variant) ③ Disconnecting means (circuit breaker) ④ Cover for parameter setting elements Integrated manual local control (key-operated switch ① and keypad ②; order variant) A key-operated switch and keypad are used for local operation. The key can be inserted/removed in three positions. Disconnecti
Resumen del contenido incluido en la página 17
Product family 2.3 Design concept 2.3.2 Connections Power terminals ① Infeed for the three phases as well as the PE and N conductor via power connectors (HAN Q4/2 with ISO23570 assignment) ② Connection of the motor via power connectors (HAN Q8/0 with ISO23570 assignment) Control circuit / bus ① AS-i bus connection with auxiliary voltage, M12 connector ② Optical device interface (under the labeling strip) for connecting the hand-held device ③ 1 x M12 output ④ 4 x M12
Resumen del contenido incluido en la página 18
Product family 2.3 Design concept 2.3.3 Status indicators The following LEDs on the front of the starter indicate the device status: ① Indicators for the device status and communication ② Indicator for output OUT1 ③ Indicators for inputs IN1 ... IN4 For a detailed description of the indicators, see "Diagnostics (Page 80)". M200D AS-Interface Basic 18 Manual, 03/2009, A5E01668085-01
Resumen del contenido incluido en la página 19
3 Functions 3.1 Overview of the device functions Device functions Electromechanical (DSte, RSte)/ electronic (sDSte, sRSte) Fieldbus interface (Page 22) ● Control function: reversing starter (Page 23) ○ Brake output 400 V / 230 V AC (Page 23) ○ Brake output 180 V DC (Page 23) ○ Thermal motor model (Page 25) ● Temperature sensor (thermistor motor protection) (Page 27) ● Blocking protection (Page 29) ● Zero-current monitoring (Page 29) ● Asymmetry monitoring (Page 31
Resumen del contenido incluido en la página 20
Functions 3.2 Introduction 3.2 Introduction Device functions This section describes the device functions. All the device functions are assigned inputs (e.g. device parameters) and outputs (e.g. messages). The following schematic diagram illustrates the functional principle of the device: Figure 3-1 Functional principle of the device Self-protection The motor protects itself against fatal damage by means of the thermal motor model and temperature measurements for electronic switchin
