Resumen del contenido incluido en la página 1
SmartSwitch 9000
9H531-17 & 9H532-17
17 Port Fast Ethernet Module
User’s Guide
9033184-01
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Notice NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or software described in this manual is subject to change without notice. IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES
Resumen del contenido incluido en la página 4
Notice CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT IMPORTANT: THIS LICENSE APPLIES FOR USE OF PRODUCT IN THE FOLLOWING GEOGRAPHICAL REGIONS: CANADA MEXICO CENTRAL AMERICA SOUTH AMERICA BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between You, the end user, and Cabletron Systems, Inc. (“Cabletron”) that sets forth your rights and obligations with respect to the Cabletron software pr
Resumen del contenido incluido en la página 5
Notice 6. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including its documentation and media). CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO YOU BY CABLETRON IN WRITING, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE ACC
Resumen del contenido incluido en la página 6
Notice export to Country Groups D:1 or E:2 the direct product of the plant or a major component thereof, if such foreign produced direct product is subject to national security controls as identified on the U.S. Commerce Control List or is subject to State Department controls under the U.S. Munitions List. 5. UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The enclosed Product (i) was developed solely at private expense; (ii) contains “restricted computer software” submitt
Resumen del contenido incluido en la página 7
Notice 4. EXPORT REQUIREMENTS. You understand that Cabletron and its Affiliates are subject to regulation by agencies of the U.S. Government, including the U.S. Department of Commerce, which prohibit export or diversion of certain technical products to certain countries, unless a license to export the product is obtained from the U.S. Government or an exception from obtaining such license may be relied upon by the exporting party. If the Program is exported from the United States
Resumen del contenido incluido en la página 8
Notice DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Cabletron Systems, Inc. Manufacturer’s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representative Name: Mr. J. Solari European Representative Address: Cabletron Systems Limited Nexus House, Newbury Business Park London Road, Newbury Berkshire RG14 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EC Dir
Resumen del contenido incluido en la página 9
Contents Chapter 1 Introduction Features........................................................................................................................... 1-1 Related Manuals............................................................................................................ 1-7 Getting Help .................................................................................................................. 1-8 Chapter 2 Installing the SmartSwitch 9000 Module Unpacking
Resumen del contenido incluido en la página 10
Contents Performance.....................................................................................................5-1 Regulatory Compliance.........................................................................................5-2 Service......................................................................................................................5-2 Physical....................................................................................................................5-2 D
Resumen del contenido incluido en la página 11
Chapter 1 Introduction ® The 9H531-17 and 9H532-17, shown in Figure 1-1, are SmartSwitch Modules for the SmartSwitch 9000. The 9H531-17 and 9H532-17 are seventeen port switch modules, with sixteen 10BASE-T/100BASE-TX or 100BASE-FX ports and one VHSIM (Very High Speed Interface Module), on the front panel. The VHSIM port accepts either HSIM or VHSIM, multi-technology interface modules. This provides support for Gigabit Ethernet, ATM, Fast Ethernet, FDDI and WAN. This module conne
Resumen del contenido incluido en la página 12
Introduction FAST ENET FAST ENET 9H531-17 9H532-17 16 16 15 15 14 14 13 13 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 Figure 1-1. The 9H531-17 and 9H532-17 1-2
Resumen del contenido incluido en la página 13
Introduction Auto-Negotiation - Speed/Duplex Mode The twisted pair ports on the front panel of the 9H532-17 module have the ability to auto-negotiate the type of connection required to provide a link to another device. During Auto-Negotiation, two devices automatically exchange information “telling” each other what their operating capabilities are. The Auto- Negotiation feature targets the maximum capabilities that can be reached between the two devices. For example, the module adjusts
Resumen del contenido incluido en la página 14
Introduction SmartTrunk SmartTrunk, also referred to as SmartTrunking, is Cabletron Systems’ terminology for load balancing or load sharing. SmartTrunk technology provides an easy-to-implement mechanism to group, or aggregate, multiple links of any technology together to scale the backbone bandwidth beyond the limitations of a single link. All links are user-configurable so administrators can scale the backbone bandwidth by adding SmartTrunk links. The benefits of SmartTrunking in
Resumen del contenido incluido en la página 15
Introduction Cabletron Systems RMON Actions is a vendor-specific extension of RMON and provides the ability to set an “Action” on any SNMP MIB variable. The Action can be triggered by setting an RMON Event and/or Alarm. An example of an Action would be to turn off a MIB-2 interface if a broadcast threshold is crossed. Broadcast Suppression Broadcast Suppression enables a user to set a desired limit of receive broadcast frames per port/per second to be forwarded out the other ports
Resumen del contenido incluido en la página 16
Introduction Table 1-1. Priority Queuing Configuration Priority Indicator Transmit Queue 73 63 52 42 31 20 10 01 Switching Options The 9H531-17 and 9H532-17 provide IEEE Standard-based 802.1 switching or SecureFast Switching Virtual Network Services. In the 802.1 mode (the default mode of operation), the switch functions as an 802.1D switch. When until VLANs are configured, it operates as an 802.1Q switch. Standards Compatibility The 9H531-17 and 9H532-17 are fully compliant with th
Resumen del contenido incluido en la página 17
Introduction Optional HSIM and VHSIM The modules provide a slot for an optional High Speed Interface Module (HSIM) or Very High Speed Interface Module (VHSIM) for additional connectivity to various networking technologies. The Release Notes that are shipped with the product list exceptions to the HSIMs and VHSIMs that operate in the modules. LANVIEW Diagnostic LEDs LANVIEW diagnostic LEDs serve as an important troubleshooting aid by providing an easy way to observe the status of i
Resumen del contenido incluido en la página 18
Introduction HSIM-W85 User’s Guide HSIM-W87 User’s Guide VHSIM-A6DP User’s Guide VHSIM-G6 User’s Guide Getting Help For additional support related to this device or document, contact Cabletron Systems using one of the following methods: World Wide Web http://www.cabletron.com/ Phone (603) 332-9400 Internet mail support@cabletron.com FTP ftp://ftp.cabletron.com/ anonymous Login Password your email address To send comments or suggestions concerning this document, contact the Cabl
Resumen del contenido incluido en la página 19
Chapter 2 Installing the SmartSwitch 9000 Module Only qualified personnel should perform installation procedures. Unpacking the Module 1. Carefully remove the module from the shipping box. (Save the box and packing materials in the event the module must be reshipped.) 2. Remove the module from the plastic bag. Observe all precautions to prevent damage from Electrostatic Discharge (ESD). 3. Carefully examine the module, checking for damage. If any damage exists, DO NOT install the modu
Resumen del contenido incluido en la página 20
Installing the SmartSwitch 9000 Module 2. Attach the antistatic wrist strap (refer to the instructions outlined on the antistatic wrist strap package). 3. Unlock the top and bottom plastic locking tabs of the module faceplate. 4. Slide out the module, and place it on its side with the internal components facing up. 5. Remove and save the two faceplate mounting screws securing the HSIM/VHSIM coverplate and remove the coverplate. 6. Remove and save the two standoff screws. 7. Place the HSI
