Resumen del contenido incluido en la página 1
belkin.com
Belkin Tech Support
Australia: 1800 666 040
New Zealand: 0800 441 913
Singapore: 800 616 1790
US: 310.898.1100 ext 2263
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 6
Resumen del contenido incluido en la página 2
High-Speed ADSL Modem with USB and Ethernet Connect your PC or network for high-speed Internet access User Manual F5D5730au
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Knowing your Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . .
Resumen del contenido incluido en la página 4
INTRODUCTION Thank you for purchasing the Belkin High-Speed ADSL Modem with USB and Ethernet. This Modem will allow you to surf the Web and connect to some popular game consoles. Features • RJ45 Ethernet interface support via crossover cable; USB interface support • IEEE 802.3 standard 10/100Mbps compliance • DHCP Server • ANSI T1.413 Issue 2, ITU-T G.DMT (G.992.1), G.Lite (G.992.2) and G.hs (G.994.1) • IP Sharing via NAT routing function (Network Address Translation) ® ® ® • NAT function fo
Resumen del contenido incluido en la página 5
INTRODUCTION System Requirements PC running Windows® 98SE , Me, 2000, XP CD-ROM drive (For USB Installation Only) One free USB port (For USB Installation Only) One RJ45 Ethernet port (Ethernet Installation Only) 2
Resumen del contenido incluido en la página 6
KNOWING YOUR MODEM Front of Modem (1) (2) 1. ADSL ON ADSL Connected OFF No ADSL Detected Blinking Connecting/Handshaking 2. LAN ON Ethernet Connected OFF No Ethernet Connection Blinking Data Transmitting 3
Resumen del contenido incluido en la página 7
KNOWING YOUR MODEM Back of Modem RJ11 Power USB Ethernet Reset Before You Start Before you start to use your Modem you must have the following: 1. An active ADSL account and line with a user name and password. 2. IP address, DNS, and gateway settings from your ISP only if applicable. 3. At least one computer with either USB or Ethernet connection. 4. TCP/IP networking protocol installed on the computer (most computers have this installed by default). 5. Microsoft® Internet Explorer 5.0 or Netsca
Resumen del contenido incluido en la página 8
INSTALLATION You can connect your equipment in one of two ways: via an Ethernet crossover cable or a USB connection. If you are connecting via an Ethernet crossover connection then follow the diagram below and proceed to “Installation Method 1” on page 6. If you have chosen to connect via a USB connection, make sure the computer you are connecting to is switched off. Use the diagram below and then proceed to “Installation Method 2” one page 6. 5 5
Resumen del contenido incluido en la página 9
INSTALLATION Installation Method 1 - Ethernet 1. Make sure that the computer that you are connecting to is powered off. 2. Connect one end of the Ethernet crossover cable to your Modem’s Ethernet port; connect the other end to your computer’s Ethernet port. 3. Connect the RJ11 phone line provided for ADSL into the line socket in the Modem. 4. Connect the power cord to the Modem and power on the Modem; wait 20 seconds for the Modem to initialise, then boot up your computer. 5. Open your web bro
Resumen del contenido incluido en la página 10
INSTALLATION Modem Configuration Enter the default user name and password and click “OK”. If you do not see the screen below then turn to “Annex A Problem 1”. Default User Name: admin Default Password: password You will then be logged into the web interface of the Modem. 7
Resumen del contenido incluido en la página 11
INSTALLATION 1. Click on “WAN” under the Configuration menu on the left-hand side of the screen. 2. Your screen will look like this. 8
Resumen del contenido incluido en la página 12
INSTALLATION 3. For New Zealand users, change the “VPI” to “0” and the “VCI” to “100”—by default this is set to 8/35. Set the “ENCAPSULATION” to “PPPoA VC-Mux” — the default is PPPoE LLC. For Australian users, ensure the “VPI” is “8” and the “VCI” is “35” and the “ENCAPSULATION” is “PPPoE LLC”. (By default this should already be set.) 4. Use the scroll bar on the right-hand side of your screen; scroll down so you see the heading “PPP”. 5. Enter the following personal details as given to you by y
Resumen del contenido incluido en la página 13
INSTALLATION h. Authentication: Select “Auto”. i. Automatic Reconnect: Should remain checked. 6. Scroll down to the bottom of the screen and you will see the following. 7. Click the “Submit” button to update the changes and then scroll back to the bottom of the screen and then click on “Save Configuration”. 8. The screen will change and you will see the following. Click on “Submit” to make the change to the Modem. 9. The Modem will restart and the LAN connection will be reestablished between you
Resumen del contenido incluido en la página 14
INSTALLATION 10. When you see this screen, the Modem has rebooted and is ready to be connected to ADSL. 11. On the left of the screen under the Status settings in your browser, click on “PPP”. You will then see the following. 11
Resumen del contenido incluido en la página 15
INSTALLATION 12. Ensure that “Connect” is displayed in the drop-down window and then click on the “Execute” button. The Modem will initiate the connection to your ADSL provider and the screen shot will look similar to this one once connected. Note that under the “Status” column it will indicate “connected” once your ADSL connection is running. 13. You can successfully close this browser window and open a new browser window and surf the Internet. 12
Resumen del contenido incluido en la página 16
ANNEX A – TROUBLESHOOTING Problem My Internet web browser would not display the login dialogue box when I typed in the numbers “10.0.0.2”. Solution •Check that your browser address bar displays nothing except “10.0.0.2”. •Check that your PC is configured to accept IP addresses dynamically by doing the following: Solution for Windows 98 and Me 1. Go to “Start / Settings / Control Panel”. In the Control Panel, double-click on “Network” and choose the “Configuration” tab. 2. Select “TCP / IP”, or
Resumen del contenido incluido en la página 17
ANNEX A – TROUBLESHOOTING 6. Select the “Disable DNS” radio button and click “OK” to finish the configuration. Solution for Windows 2000 1. Go to “Start / Settings / Control Panel”. In the Control Panel, double-click on “Network and Dial-up Connections”. 2. Double-click “LAN Area Connection”. 14
Resumen del contenido incluido en la página 18
ANNEX A – TROUBLESHOOTING 3. In the “LAN Area Connection Status” window, click “Properties”. 4. Select “Internet Protocol (TCP/IP)” and click “Properties”. 15
Resumen del contenido incluido en la página 19
ANNEX A – TROUBLESHOOTING 5. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to finish the configuration. Solution for Windows XP 1. Go to Control Panel on your computer and double-click “Network Connections” and right-click your network connection and select “Properties”. 16
Resumen del contenido incluido en la página 20
ANNEX A – TROUBLESHOOTING 2. Highlight “Internet Protocol (TCP/IP)” and select “Properties”. If you do not have TCP/IP displayed in the list then you will need to install TCP/IP before proceeding. 3. Ensure that: “Obtain an IP address automatically” and “Obtain DNS server address automatically” is selected and then hit “OK” twice. 17
