Resumen del contenido incluido en la página 1
User Manual
ACS-1208AL
ACS-1216AL
2003-01-27
Resumen del contenido incluido en la página 2
Warning! This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commer- cial environment. This equipment generates, uses and can radiat
Resumen del contenido incluido en la página 3
ACS-1208AL / ACS-1216AL User Manual Packing List The complete ACS-1208AL / ACS-1216AL package consists of: 1 ACS-1208AL or ACS-1216AL KVM Switch 2 Custom KVM Cable Sets (2L-5202P) 1 Firmware Upgrade Cable 1 Power Adapter with Power Cord 1 User Manual 1 Quick Start Guide 1 Rack Mounting Kit Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer. Read this manual thoroughly and follow the
Resumen del contenido incluido en la página 4
ACS-1208AL / ACS-1216AL User Manual Table of Contents 1. Introduction Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . 1-4 Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Cables . . . . . . .
Resumen del contenido incluido en la página 5
ACS-1208AL / ACS-1216AL User Manual 5. The Firmware Upgrade Utility Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Performing the Upgrade . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Starting the Upgrade . . . .
Resumen del contenido incluido en la página 6
ACS-1208AL / ACS-1216AL User Manual About This Manual This User Manual is provided to help you get the most from your ACS-1208AL / ACS-1216AL system. It covers all aspects of installa- tion, configuration and operation. An overview of the information found in the manual is provided below. Overview Chapter 1, Introduction, introduces you to the ACS-1208AL / ACS-1216AL System. Its purpose, features and benefits are presented, and its front and back panel components are described. Chapter 2, Instal
Resumen del contenido incluido en la página 7
ACS-1208AL / ACS-1216AL User Manual Conventions The following typographical conventions are used throughout this manual: Bullet lists provide information, but not procedural steps. 1. Numbered lists represent procedures with sequential steps. An indented typeface like the one below: Key information in indicates words and characters you key in. Unless otherwise mentioned, you can use either upper or lower case. The names of the keys you should press are placed inside of square brackets, and app
Resumen del contenido incluido en la página 8
ACS-1208AL / ACS-1216AL User Manual Notes: viii 2003-01-27
Resumen del contenido incluido en la página 9
Chapter 1. Introduction his chapter introduces you to the ACS-1208AL / ACS-1216AL KVM Switch. Its T purpose, features and benefits are presented, and its front and back panel compo- nents are described. Overview The Master View ACS-1208AL and ACS-1216AL KVM Switches are control units that allow access to multiple computers from a single console (keyboard, mouse, and monitor). Before the development of the Master View, the only way to control multiple computer configurations from a single console
Resumen del contenido incluido en la página 10
ACS-1208AL / ACS-1216AL User Manual a 1U system rack. Because of its modular design, the KVM section can be detached from the switch section. If you ever need to expand your connections, you can remove the 8 port Switch module; and replace it with a 16 port Switch module. Your ACS-1208AL / ACS-1216AL investment is protected by an included Firmware Upgrade Utility. You can stay current with the latest functionality improvements by downloading firmware update files from our website as they become
Resumen del contenido incluido en la página 11
Introduction Features Integrated KVM Console with 15" LCD Monitor - In a 1U High Slideaway Housing For Convenient Rack Mounting Space Saving Technology - A Single Console Controls Up To 8 (ACS-1208AL) or 16 (ACS-1216AL) Computers Daisy Chain Up To 31 Additional Units - Control Up to 512 Computers From the Unit’s Integrated Slideaway Console Modular Design - Console Detaches From the Switch Chassis for Easy Maintenance Keyboard/Touchpad Module is Easily Removed for Quick Repair or Rep
Resumen del contenido incluido en la página 12
ACS-1208AL / ACS-1216AL User Manual Hardware Requirements Computers The following equipment must be installed on each computer: A VGA, SVGA or Multisync card. Note: Since the integrated LCD monitor’s maximum resolution is 1024 x 768, make sure that the computer resolution settings do not exceed 1024 x 768. A 6-pin mini-DIN (PS/2 style) mouse port.* Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V D
Resumen del contenido incluido en la página 13
Introduction 2L-1700 / 2L-1701 2L-5201P / 5202P / 5203P Note: 1. The ACS-1208AL/ACS-1216AL does not support serial mice. You cannot use Serial-to-PS/2 adapters with the cables. Attempts to do so will not work. 2. If your computer uses an AT style keyboard socket you will need to purchase a PS/2-to-AT keyboard adapter (Part No. 2A-106, or any standard keyboard adapter), in order to plug the cable into the computer’s keyboard port. 1-5 2003-01-27
Resumen del contenido incluido en la página 14
ACS-1208AL / ACS-1216AL User Manual ACS-1208AL / ACS1216AL Front View 1 2 3 4 10 9 8 5 6 7 1. Handle Pull to slide the KVM module out; push to slide the module in. 2. Cover After sliding the KVM module out, flip up the cover to access the LCD monitor, keyboard and touchpad. 3. Port LEDs Port LEDs provide status information about their corresponding CPU Ports. The top row of LEDs corresponds to Ports 1 - 8; the bottom row corresponds to Ports 9 - 16. There are two LEDs for each Port. The one on t
Resumen del contenido incluido en la página 15
Introduction Note: 1. Since the ACS-1208AL only has eight ports, only the top row of LEDs (corresponding to Ports 1 - 8) are active on that unit. On the ACS-1216AL, both rows are active. 2. When the ACS-1208AL / ACS-1216AL is first powered on, the On Line and Selected LEDs blink one after the other as the Switch performs a self-test. 4. Keyboard 5. Power LED Lights BLUE to indicate that the unit is receiving power. 6. Slide Release For convenience and to prevent inadvertent damage to the console
Resumen del contenido incluido en la página 16
ACS-1208AL / ACS-1216AL User Manual ACS-1208AL / ACS-1216AL Rear View 1 2 3 4 5 6 1 2 3 4 5 6 1. Daisy Chain Port When Daisy Chaining Units, the cable plugs in here. 2. CPU Port Section The cables that link to the computers plug in here. Note: The shape of these 15-pin connectors has been specifically modified so that only KVM cables designed to work with this switch can plug in (see the Cables section on p. 4, for details). Do NOT attempt to use ordinary 15 pin VGA connector cables to link thes
Resumen del contenido incluido en la página 17
Introduction 5. Firmware Upgrade Port The Firmware Upgrade Cable that transfers the firmware upgrade data from the administrator’s computer to the ACS-1208AL / ACS-1216AL (see p. 5-2), plugs into this RJ-11 connector. 6. Firmware Upgrade Recovery Switch During normal operation and while performing a fimware upgrade, this switch should be in the NORMAL position. See p. 5-7 for details about the use of this switch. 1-9 2003-01-27
Resumen del contenido incluido en la página 18
ACS-1208AL / ACS-1216AL User Manual LCD OSD Configuration The LCD OSD allows you to set up and configure the LCD display: To bring up the LCD OSD main menu, press the button marked Menu. Use the and buttons to navigate and make adjustments with; after navigating to a setting choice, use the Menu button to bring up the adjustment screen. When making adjustments, increases the value; decreases the value. When you are satisfied with your adjustment, press Exit to return to the OSD m
Resumen del contenido incluido en la página 19
Chapter 2. Installation his chapter explains how to connect up your installation — from a basic single T stage hookup to a complete daisy chained setup. Before you Begin 1. Make sure that power to all the devices you will be connecting up have been turned off. 2. To prevent damage to your equipment due to ground potential difference, make sure that all devices on the installation are properly grounded. Consult your dealer for technical details, if necessary. Single Stage Installation In a Single
Resumen del contenido incluido en la página 20
ACS-1208AL / ACS-1216AL User Manual 3. Turn on the power to the computers. Daisy Chaining To control even more computers, up to 31 additional Master View ACS-1208A / ACS-1216A units can be daisy chained down from the First Station. Note: It would be unnecessarily wasteful and expensive to use ACS-1208AL / ACS-1216AL switches for daisy chaining since there is no point in having consoles on the chained switches. Therefore, ACS-1208A and ACS-1216A switches are used, instead. These are similar in al
