Manual de instrucciones de ADTRAN DSX 1

Resumen del contenido incluido en la página 1

Configuring the
Total Access 900 Series
DSX-1 Interface
Quick Configuration Guide
61210916L1-42.4B March 2006
Please note that these examples are given for your study and consideration only.
They are to help you reach a better understanding of the fundamental concepts
before configuring your application. It will be necessary for you to modify these
examples to match your network configuration. Please replace all underlined entries
(example) with your specific parameters.
Please refer to t

Resumen del contenido incluido en la página 2

9. Enter clock source internal to set the system clock source to internal timing. 10. Enter voice trunk T03 type t1-rbs supervision wink role network to create and set up this trunk group for use with T1-RBS (DSX-1) interface. 11. Enter connect t1 0/x tdm-group 2 to allow the physical DSX-1 interface (t1 0/x) to pass the tdm group to the end device. 12. Enter vad to enable Voice Activity Detection (VAD). VAD detects silence during a call to reduce the bandwidth a call uses when voice packets