Resumen del contenido incluido en la página 1
AS1011M-T2
USER’S MANUAL
1.0
Resumen del contenido incluido en la página 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. The manufacturer reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software, i
Resumen del contenido incluido en la página 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the AS1011M-T2 server. Instal- lation and maintenance should be performed by experienced technicians only. The AS1011M-T2 is a high-end server based on the SC811FT-260 1U rack- mount chassis and the H8SMi-2, a single processor motherboard that supports AMD Opteron processors and up to 8 GB of unbuffered ECC/non-ECC DDR2- 80
Resumen del contenido incluido en la página 4
AS1011M-T2 User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the 1011M-T2. Chapter 5: Advanced Motherboard Setup Chapter 5 provides detailed information on the H8SMi-2 motherboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when recon
Resumen del contenido incluido en la página 5
Preface Notes v
Resumen del contenido incluido en la página 6
AS1011M-T2 User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Motherboard Features ........................
Resumen del contenido incluido en la página 7
Table of Contents Chapter 5: Advanced Motherboard Setup 5-1 Handling the Motherboard ............................................................................... 5-1 5-2 Mounting the Motherboard into a Chassis ...................................................... 5-2 5-3 Processor and Heatsink Installation ................................................................ 5-2 5-4 Connecting Cables .......................................................................................... 5-5 Co
Resumen del contenido incluido en la página 8
AS1011M-T2 User's Manual Power Supply Fail Alarm Reset Header ................................................. 5-18 Compact Flash Power ............................................................................ 5-18 SGPIO .................................................................................................... 5-18 5-10 Jumper Settings ............................................................................................. 5-19 Explanation of Jumpers ........................
Resumen del contenido incluido en la página 9
Table of Contents Chapter 7: BIOS 7-1 Introduction .......................................................................................................7-1 7-2 Main Menu .......................................................................................................7-2 7-3 Advanced Settings Menu ................................................................................7-2 7-4 Boot Menu ............................................................................................
Resumen del contenido incluido en la página 10
AS1011M-T2 User's Manual Notes x
Resumen del contenido incluido en la página 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The AS1011M-T2 is a high-end single processor, mini 1U rackmount server com- prised of two main subsystems: the SC811FT-260 chassis and the H8SMi-2 moth- erboard. The H8SMi-2 supports a single AMD Opteron 1000 series processor in a 940-pin AM2 socket and up to 8 GB of ECC/non-ECC DDR2-800/667/533 SDRAM memory. Please refer to our web site for information on operating systems that have been certifi ed for use with
Resumen del contenido incluido en la página 12
AS1011M-T2 User's Manual 1-2 Motherboard Features At the heart of the 1011M-T2 lies the H8SMi-2, a single processor motherboard designed to provide maximum performance. Below are the main features of the H8SMi-2. (See Figure 1-1 for a block diagram of the chipset.) Processors The H8SMi-2 has an 940-pin AM2 type socket that supports a single AMD Opteron Series 1000 processor. Please refer to the support section of our web site for a complete listing of supported processors. Memory The
Resumen del contenido incluido en la página 13
Chapter 1: Introduction Onboard Controllers/Ports An onboard IDE controller supports one fl oppy drive and one Ultra ATA 133 hard drive or ATAPI device. Onboard I/O backpanel ports include one serial COM port, two USB ports, a VGA (monitor) port, PS/2 mouse and keyboard ports, a parallel port and two GLAN (RJ45) ports. Other Features Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU ov
Resumen del contenido incluido en la página 14
AS1011M-T2 User's Manual 1-3 Server Chassis Features The 1011M-T2 is a mini 1U rackmount server platform confi guration. The following is a general outline of the main features of the SC811FT-260 chassis. System Power When confi gured as a 1011M-T2, the SC811FT-260 chassis includes a single 260W power supply. Control Panel The SC811FT-260's control panel provides important system monitoring and control information. LEDs indicate power on, network activity, hard disk drive activity and over
Resumen del contenido incluido en la página 15
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogen
Resumen del contenido incluido en la página 16
AS1011M-T2 User's Manual Notes 1-6
Resumen del contenido incluido en la página 17
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your 1011M-T2 up and run- ning. Following the steps in the order given should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your 1011M-T2 system has come to you with the processor and memory preinstalled. If your system is not already fully integrated with a motherboard, processor,
Resumen del contenido incluido en la página 18
AS1011M-T2 User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for suffi cient airfl ow and ease in servicing. - This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets, etc.). Warnings and Precautions! ! ! Rack Precautions - Ensure that the leveling jack
Resumen del contenido incluido en la página 19
Chapter 2: Server Installation Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient tempera- ture (Tmra). Reduced Airfl ow Equipment should be mounted into a rack so that the
Resumen del contenido incluido en la página 20
AS1011M-T2 User's Manual 2-4 Installing the System into a Rack This section provides information on installing the 1011M-T2 into a rack unit. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. The following is a guideline for installing the unit into a rack with the rack rails provided with the system. You should also refer to the inst
