Resumen del contenido incluido en la página 1
®
SUPER
SUPERSERVER 6014P-T
SUPERSERVER 6014P-TR
USER’S MANUAL
1.0a
Resumen del contenido incluido en la página 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPER MICRO COMPUTER reserves the right to make chan
Resumen del contenido incluido en la página 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6014P- T/6014P-TR. Installation and maintainance should be performed by experienced technicians only. The SuperServer 6014P-T/6014P-TR is a high-end server based on the SC814+T- 560/SC814+T-R560 1U rackmount chassis and the Super X6DHP-TG, a dual ® TM processor serverboard that supports Intel 64-bit Xeon pr
Resumen del contenido incluido en la página 4
SUPERSERVER 6014P-T/6014P-TR User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 6014P-T/6014P-TR. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X6DHP-TG serverboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing p
Resumen del contenido incluido en la página 5
Preface Notes v
Resumen del contenido incluido en la página 6
SUPERSERVER 6014P-T/6014P-TR User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features ......
Resumen del contenido incluido en la página 7
Table of Contents Chapter 4: System Safety 4-1 Electrical Safety Precautions ........................................................................... 4-1 4-2 General Safety Precautions ............................................................................. 4-2 4-3 ESD Precautions ............................................................................................ 4-3 4-4 Operating Precautions ...................................................................................
Resumen del contenido incluido en la página 8
SUPERSERVER 6014P-T/6014P-TR User's Manual SMB ......................................................................................................... 5-17 SMB Power Connector ............................................................................ 5-17 5-9 Jumper Settings ............................................................................................. 5-18 Explanation of Jumpers ........................................................................... 5-18 CMOS Clear ......
Resumen del contenido incluido en la página 9
Table of Contents 7-6 Boot .............................................................................................................. 7-19 7-7 Exit ................................................................................................................ 7-20 Appendices: Appendix A: BIOS POST Codes Appendix B: Software Installation Appendix C: System Specifi cations ix
Resumen del contenido incluido en la página 10
SUPERSERVER 6014P-T/6014P-TR User's Manual Notes x
Resumen del contenido incluido en la página 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SuperServer 6014P-T/6014P-TR is a high-end server comprised of two main subsystems: the SC814+T-560/SC814+T-R560 1U server chassis and the X6DHP- TG dual processor serverboard. Please refer to our web site for information on operating systems that have been certifi ed for use with the SuperServer 6014P- T/6014P-TR (www.supermicro.com). In addition to the serverboard and chassis, various hardware components have
Resumen del contenido incluido en la página 12
SUPERSERVER 6014P-T/6014P-TR User's Manual SuperServer 6014P-T/6014P-TR User's Manual 1-2 Serverboard Features At the heart of the SuperServer 6014P-T/6014P-TR lies the X6DHP-TG, a dual processor serverboard based on Intel's E7520 chipset. Below are the main features of the X6DHP-TG (see Figure 1-1 for a block diagram of the chipset). Processors The X6DHP-TG supports single or dual 604-pin Intel Xeon EM64T type processors at a FSB speed of 800 MHz. Please refer to the serverboard descr
Resumen del contenido incluido en la página 13
Chapter 1: Introduction ATI Graphics Controller The X6DHP-TG features an integrated ATI video controller based on the Rage XL graphics chip. Rage XL fully supports sideband addressing and AGP texturing. This onboard graphics package can provide a bandwidth of up to 512 MB/sec over a 32-bit graphics memory bus. Other Features Other onboard features that promote system health include onboard voltage moni- tors, a chassis intrusion header, auto-switching voltage regulators, chassis and C
Resumen del contenido incluido en la página 14
SUPERSERVER 6014P-T/6014P-TR User's Manual PCI Expansion Slots 6014P-T: supports the use of two standard size PCI-X add-on cards (of up to 100 MHz) or two standard size PCI-Express x8 add-on cards (with riser cards). See section 5-6 for details. 6014P-TR: supports the use of one standard size 100 MHz PCI-X or PCI-Express x8 add-on card (with riser card). See section 5-6 for details. Front Control Panel The SC814+T-560/SC814+T-R560's control panel provides you with system moni- toring an
Resumen del contenido incluido en la página 15
Chapter 1: Introduction Figure 1-1. Intel E7520 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. 1-5
Resumen del contenido incluido en la página 16
SUPERSERVER 6014P-T/6014P-TR User's Manual 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML
Resumen del contenido incluido en la página 17
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 6014P- T/6014P-TR up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your system has come to you with the processors and memory preinstalled. If your system is not already fully integrated with a serve
Resumen del contenido incluido en la página 18
SUPERSERVER 6014P-T/6014P-TR User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for suffi cient airfl ow and ease in servicing. - This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). - This product is not suitable for use with visual d
Resumen del contenido incluido en la página 19
Chapter 2: Server Installation Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient tempera- ture (Tmra). Reduced Airfl ow Equipment should be mounted into a rack so that the
Resumen del contenido incluido en la página 20
SUPERSERVER 6014P-T/6014P-TR User's Manual 2-4 Installing the System into a Rack This section provides information on installing the 6014P-T/6014P-TR into a rack unit with the rack rails provided. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you ar
