Resumen del contenido incluido en la página 1
of Switzerland
of Switzerland
Re:source
5.1 Decoder Module
MK3
Dominating Entertainment.
Revox of Switzerland.
Resumen del contenido incluido en la página 2
5.1 Decoder Module 3 Re:source 1
Resumen del contenido incluido en la página 3
5.1 Decoder Module 3 Re:source Contents 5.1 Decoder Module 3 Installation 4 5.1 Decoder connections 5 Line outputs 5-6 Digital inputs 6 Edit source name 7 5.1 Decoder menu 8 Room sound programs 8 Sound field description 9 Stereo-Pure Analogue 11 Amplifier Sub-menu 12 A) Level setting 12 Adjusting the Subwoofer 13 Level resetting 13 B) Bass and treble 14 C) Dynamic range 14 D) Lipsync Delay 15 Setup Amplifier 16 Speaker configuration 16 1 Large 2 Small 17 3 None 18 Speak
Resumen del contenido incluido en la página 4
5.1 Decoder Module 3 Re:source 5.1 Decoder Module The 5.1 Decoder module forms The 5.1 Decoder Module the core of the M51’s audio handles the conversion of the processing with all functions, symmetrical analogue signals in which the puristic Stereo and ultra-linear stereo operation. the inspired home cinema From here, it also goes through listener expects. It monitors and gold-coated silver contact relays controls all the audio signals; it to the output stages. generates all the
Resumen del contenido incluido en la página 5
5.1 Decoder Module 3 Re:source Installation The 5.1 Decoder plug-in card To be on the safe side, you has the most modern should discharge any static technology on it and should be from yourself by touching an handled with care. earthed metal object such as a radiator. Before you start to install the card, the M51 must be switched Remove the decoder module off and the power plug must be from its packaging and insert it removed from the power socket. into the slot
Resumen del contenido incluido en la página 6
5.1 Decoder Module 3 Re:source 5.1 Decoder connections Line outputs The 5.1 Decoder offers 6 line REVOX outputs where audio signals are available in 5.1 format. The DIGITAL following is an overview of the IN individual signals: 3 OUTPUT L Line output for the left-hand front channel 1 2 OUTPUT R OUT PUTS Line output for the right- hand front channel L R 3 SUB Line output for the active CEN- subwoofer SUB TER CENTER Line output for the centre L R cha
Resumen del contenido incluido en la página 7
5.1 Decoder Module 3 Re:source Digital inputs These line outputs are used to The 5.1 Decoder Module can supply external outputs. In the play back digital sources such same way, active speakers can as a CD, MD or DAT player be connected. In Home cinema using the three digital inputs operation, the active subwoofer DIGITAL IN 1-3. You should is principally controlled by the connect the external devices to SUB output. the 5.1 Decoder Module using either a Cinch cable (Digital
Resumen del contenido incluido en la página 8
5.1 Decoder Module 3 Re:source Edit function Edit source name You will move to the following The 5.1 Decoder Module offers menu display by pressing the you the option to select your Edit Name softkey. own name for the inputs. In this way, you no longer have to remember which external device you have connected to which input. You can label it accordingly. Select the digital source in the SOURCE menu whose name you want to change. The following Ed
Resumen del contenido incluido en la página 9
5.1 Decoder Module 3 Re:source 5.1 Decoder menu Room sound programs As the 5.1 Decoder module is The Amplifier button brings you the central unit for the processing directly into the 5.1 Decoder of audio signals, this module Main Menu. Here, you can has been assigned its own choose between 6 Surround function key, namely the large sounds and an ultra-lineal key labelled as Amplifier on the stereo playback: front of the M51. Movie Music Matrix S
Resumen del contenido incluido en la página 10
5.1 Decoder Module 3 Re:source Sound field description Pro Logic II is a further When you play a DVD, whether development of Dolby Pro Logic using the M51's internal drive or and was developed especially an external device over DIGITAL for the surround-sound IN, the 5.1 audio format that the playback of pure stereo DVD requires is automatically sources, alongside the other selected. These are: well-known decoding of Pro Dolby Digital, DTS, MPEG Logic sound material (ma
Resumen del contenido incluido en la página 11
5.1 Decoder Module 3 Re:source Center Width Music This parameter allows you to With pure stereo music define the centre settings, recordings, the Music mode allowing you to choose to hear delivers a new level of live the centre range just from the atmosphere, which satisfies the Center speaker, to hear it as a most discerning listener. You "phantom centre" using the right can set up every conceivable and lefthand speakers or to set- combination of settings using up a com
Resumen del contenido incluido en la página 12
5.1 Decoder Module 3 Re:source Matrix Stereo This parameter primarily Additionally, it is possible to increases the surround listen to music in pure stereo effect for programmes with out the influence of any sources recorded in stereo room sound program. In the sound, by using an elaborate lower display field this is Dolby Matrix decoder. indicated with . In this case, the audio cables Spatial are connected directly to the This is a living sound picture, out
Resumen del contenido incluido en la página 13
5.1 Decoder Module 3 Re:source A) Level setting Amplifier sub-menu The sub-menu shown below The sound fields have different suggests level settings for the sub-menus where you can surround speakers, including define your specific sound Center and Subwoofer: requirements. Not each sub- menu is available for all sound fields. A) The speakers can be adjusted to the correct volume ratio to B) the main speakers using the softkeys. This
Resumen del contenido incluido en la página 14
5.1 Decoder Module 3 Re:source A) Adjusting the Subwoofer Resetting the level Unlike the normal passive Level settings can be reset to speakers that are connected to the neutral mid-position with the the M51 speaker outputs, active Reset key. subwoofers have their own volume control. To set the correct basic volume, you should first bring the subwoofer level to the neutral mid-position with the Reset key. Then you should adjust the volume at the subwoof
Resumen del contenido incluido en la página 15
5.1 Decoder Module 3 Re:source B) Bass and treble C) Dynamic range As well as the sound field With DVD playback, you can settings, you also have the modify the volume dynamic option of increasing or range. decreasing the bass and treble levels in the range of ± 12dB. If you select the setting Maximum, the dynamics are This option is only available with played back in an unmodified the sound fields Stereo, form. This means that the X-Stereo and Spatial. quietest and the
Resumen del contenido incluido en la página 16
5.1 Decoder Module 3 Re:source D) Lipsync Delay You can adjust the time delay in Using the Lipsync Delay steps of 5 ms using the two setting, you can modify the softkeys – Delay +. To do this, timing of the audio signal, to you are advised to select a DVD allow for the time delay of the which features drums or other video signal caused by the percussion instruments. This is system. Because of the digital the easiest way to be able to calculations required for the synchronise
Resumen del contenido incluido en la página 17
5.1 Decoder Module 3 Re:source Speaker configuration Amplifier Setup The first page in the Amplifier Using the Setup menu, you can setup covers the configuration adapt your loudspeakers to the of home cinema speakers. optimum acoustics with the M51. Here, you can define which speakers you have connected This menu is called by pressing and whether these are large and holding the Setup key for speakers with the full frequency some 2 seconds and then range or smaller spea
Resumen del contenido incluido en la página 18
5.1 Decoder Module 3 Re:source 1 Large 2 Small The speaker receives the full The speaker only receives frequency range. frequencies above 80 Hz. This is the right setting for This is the right setting for smaller speakers whose bass speaker speakers, which because of their has a diameter of at least 12cm smaller size cannot reproduce and as a result can reproduce frequencies under 80 Hz. frequencies under 80 Hz. As a rule, these are small or satellite speakers with bass
Resumen del contenido incluido en la página 19
5.1 Decoder Module 3 Re:source 3 None The setting None deactivates the speaker output. There is no signal at the output available. This setting is selected if you want to work without this speaker. This setting is only available for the Center and rear surround speakers. Speakers with the setting None do not appear in the amplifier menu. In the above example, the Center is deactivated. 18
Resumen del contenido incluido en la página 20
5.1 Decoder Module 3 Re:source Speaker settings Subwoofer Main speaker Using the Subwoofer menu, The settings Large, Small and you can setup the operation of Digital are available here. an active subwoofer in the Optically, the status of the whole speaker concept. speakers is shown in the display with the symbol or . Center speaker The Center can also be configured as Large, Small or None. With the None setting, the Center signal is split
