Resumen del contenido incluido en la página 1
PCA7408
PROM Programming Adapter for M37221ERSS/EFSP/ESS/M37225ERSS/ECSP/ECSS
User's Manual
Rev.1.00
September 1, 2003
REJ10J0247-0100Z
Resumen del contenido incluido en la página 2
* R4945 and R4945A are trademarks of Advantest Corporation. * IC59-4206-G4 is a trademark of Yamaichi Electronics Corporation Ltd. Keep safety first in your circuit designs! • Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due co
Resumen del contenido incluido en la página 3
Contents Chapter 1. Precautions for Safety ...........................................................................................4 Chapter 2. Introduction ...........................................................................................................6 2.1 Things to Check When Unpacking .......................................................................6 Chapter 3. How to Write the Program ....................................................................................7 3
Resumen del contenido incluido en la página 4
Chapter 1. Precautions for Safety In both the user's manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. If the requirements shown in the "WARNING" sentences are ignored, the equipment may WARNING caus
Resumen del contenido incluido en la página 5
WARNING Warnings for Use Environment: • This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care should be taken that this temperature is not exceeded. • Select the proper programming mode of the PROM programmer. CAUTION Cautions to Be Taken for Modifying This Product: • Do not disassemble or modify this product. Disassembling and modifying the product will void your warranty. Cautions to Be Taken for This Product: • Use caution when handling this product.
Resumen del contenido incluido en la página 6
X1 PCA7408 REV.A R1 R2 IC1 42 22 21 JAPAN 16 16 C1 Chapter 2. Introduction This product is a PROM programming adapter for 7200 Series MCUs (8-bit MCU). This product is used to write programs into the internal ROM of MCU with a commercially available PROM programmer. This manual mainly explains specifications of this product and how to operate it. Figure 2.1 shows the external view of the product and its constituent parts. IC59-4206-G4 IC socket (made by Yamaichi ElectronicsCo., Ltd.) PCA7408 Mai
Resumen del contenido incluido en la página 7
Chapter 3. How to Write the Program This chapter describes procedures you need to follow to write the program. For details on how to operate the PROM programmer, refer to the user's manual of the PROM programmer. 3.1 Programming Procedure Follow the steps (1) to (7) below to write the program into the MCU. (1) Read the program into the PROM programmer. (2) Attach the adapter to the IC socket of the PROM programmer. (See Section 3.2) (3) Insert the MCU into the adapter. (See Section 3.3) (4) Set
Resumen del contenido incluido en la página 8
X1 21 22 JAPAN 16 16 C1 3.2 Attaching the Adapter to the PROM Programmer As shown in Figure 3.1, attach the No. 1 pin of the PCA7402E connector (standard-pitch 32-pin pin- header mounted) to the No. 1 pin of the IC socket of the PROM programmer. Be careful when attaching to the PROM programmer because incorrect insertion can cause fatal damage to the MCU. No. 1 pin of PCA7476E No. 1 pin of IC socket on the PROM programmer Figure 3.1 Attaching the adapter to the PROM programmer ( 8 / 16 ) 32 1 17
Resumen del contenido incluido en la página 9
C2 X1 3.3 Inserting an MCU into the Adapter As shown in Figure 3.2, insert the MCU into the IC socket with the No. 1 pin of the MCU matched to the No. 1 pin of the IC socket on the PCA7408. Be careful when attaching to the PROM programmer because incorrect insertion can cause fatal damage to the MCU. TOP view PCA7408 REV.A R1 R2 IC1 42 1 No. 1 pin of MCU IC socket on PCA7408 21 16 16 22 C1 JAPAN Figure 3.2 Inserting an MCU CAUTION Caution to Be Taken for Handling an MCU: • Do not touch the conne
Resumen del contenido incluido en la página 10
3.4 Setting a Programming Area When writing and erasing programs, be sure to set the programming area. And also, specify its device of the PROM programmer. Table 3.1 Programming area MCU type PROM programmer Programming area ROM size of MCU MCU Device Programming area Internal ROM (62KB) 0080016-0FFFF16 0080016-0FFFF16 M37221EFSP/SS OSD ROM (256 types) 1000016-11FFF16 1000016-11FFF16 M5M27C101 Internal ROM (48KB) 0400016-0FFFF16 0400016-0FFFF16 M37225ECSP/SS OSD ROM (15 KB) 1140016-17AFF16* 1140
Resumen del contenido incluido en la página 11
Chapter 4. Specifications 4.1 Specifications Table 4.1 lists the common specifications of the programming adapter. Table 3.1 Specifications Applicable MCU M37221ERSS, M37221EFSP, M37221EFSS, M37225ERSS, M37225ECSP, M37225ECSS IC socket IC59-4206-G4 (made by Yamaichi Electronics Co., Ltd.) Operating clock frequency 4 MHz (Supplied by the ceramic oscillator mounted on the PCA7408) Power supply Supplied from the Vcc of the PROM programmer A programmable MCU mounted PCA7408 (IC socket for MCU mounte
Resumen del contenido incluido en la página 12
4.2 Memory Maps Figure 4.1 shows memory maps of the MCU and the PROM programmer. 0000016 0000016 Internal RAM, SFR etc. Unused area 0XX0016 0XX0016 Internal ROM area Programming area 0FFFF16 0FFFF16 1YY0016 1YY0016 OSD ROM OSD ROM 1ZZFF16 1ZZFF16 Unused area Unused area FFFFF16 FFFFF16 MCU PROM programmer (M5M27C101 mode) Internal ROM OSD ROM MCU Address XX Address ZZ Address ZZ 14, 54, 56, 58, 3B, 54, 56, 58, 5A, 5C, 60, 62, 5A, 5C, 5E, 60, M37225EC 40 64, 66, 68, 6A, 62, 64, 66, 68, 6C, 6E, 70
Resumen del contenido incluido en la página 13
Chapter 5. Troubleshooting The tables below summarizes errors to be checked carefully before you determine them to be a fault. 5.1 Errors That Occur When Writing to PROM (1) When Newly Purchased Cause Remedy See page Is the adapter attached to the correct position of the PROM 8 programmer? Programming adapter Is the MCU attached to the correct position? 9 Is the area set correctly? 10 PROM programmer Is the correct device selected? 10 The IC socket of the PROM programmer may be stained. The - Co
Resumen del contenido incluido en la página 14
5.2 MCUs Do Not Function Normally The program operates normally on the emulator, but when the MCU that has normally been written is attached the same program does not function normally. (1) Is the offset address specified correctly when copying data into the PROM programmer? (2) In the emulator, NOPs are often inserted in the area where the program has not been read, therefore the program happens to appear functioning normally even though it may have gone wild. Check your program again. (3) The
Resumen del contenido incluido en la página 15
PCA7408 User's Manual Rev.1.00 September 1, 2003 REJ10J0247-0100Z COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Resumen del contenido incluido en la página 16
