Resumen del contenido incluido en la página 1
To all our customers
Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and othe
Resumen del contenido incluido en la página 2
Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) us
Resumen del contenido incluido en la página 3
H8S/2378F E10A Emulator User’s Manual ADE-702-359 Rev. 1.0 10/18/02 Hitachi, Ltd. HS2378KCM01HE
Resumen del contenido incluido en la página 4
Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confi
Resumen del contenido incluido en la página 5
IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. Emulator Product: Throughout this document, the term "emulator product" shall be defined as the following products produced only by Hitachi, Ltd. excluding all subsidiary products. • Emulator • User system interface cable The user system or a host computer is no
Resumen del contenido incluido en la página 6
LIMITED WARRANTY Hitachi warrants its emulator products to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Hitachi, at its option, will replace any emulator products returned intact to the factory, transportation charges prepaid, which Hitachi, upon inspection, shall determine to be defective in material and/or workmanship. The foregoing shall constitute the sole remedy for any breach of Hitachi's warranty. See the Hitachi wa
Resumen del contenido incluido en la página 7
State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. The Warranty is Void in the Following Cases: Hitachi shall have no liability or legal responsibility for any problems caused by misuse, abuse, misapplication, neglect, improper h
Resumen del contenido incluido en la página 8
SAFETY PAGE READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. DEFINITION OF SIGNAL WORDS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situation which, if n
Resumen del contenido incluido en la página 9
WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance. 2. Always switch OFF the host computer and user system before connecting or disconnecting any CABLES or PARTS. 3. Connect the connectors in the user system and in
Resumen del contenido incluido en la página 10
Warnings on Emulator Usage Be sure to read and understand the warnings below before using this emulator. Note that these are the main warnings, not the complete list. WARNING Always switch OFF the host computer and user system before connecting or disconnecting any CABLES or PARTS. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. CAUTION Place the host computer and user system
Resumen del contenido incluido en la página 11
CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera
Resumen del contenido incluido en la página 12
VIII
Resumen del contenido incluido en la página 13
Preface Thank you for purchasing the E10A emulator. CAUTION READ section 2, Preparation before Use, of this User’s Manual before using the emulator product. Incorrect operation will damage the user system and the emulator product. This emulator is an efficient development tool for software and hardware of user systems based on Hitachi’s original microprocessor. The emulator operates using the Hitachi debugging interface ® (hereafter referred to as the HDI), which is the interface program th
Resumen del contenido incluido en la página 14
Related Manuals: • Supplementary Informations • Hitachi Debugging Interface User's Manual (HS6400DIIW5SE) • H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage Editor User's Manual • Hardware Manual for each MCU • Programming Manual for each MCU Notes: 1. IBM PC is a registered trademark of International Business Machines Corporation. ® ® ® 2. Microsoft , Windows , and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. ® ® ® Mi
Resumen del contenido incluido en la página 15
Contents Section 1 Overview........................................................................................... 1 1.1 Warnings...........................................................................................................................3 1.2 Environmental Conditions ................................................................................................4 1.3 Components ..................................................................................................
Resumen del contenido incluido en la página 16
3.15 Break Function..................................................................................................................51 3.15.1 Software Break Function .....................................................................................51 3.16 Hardware Break Function .................................................................................................57 3.17 Trace Function ................................................................................................
Resumen del contenido incluido en la página 17
Section 6 H8S/2378F E10A Emulator Specifications........................................ 119 6.1 Overview of the Emulator.................................................................................................119 6.2 Pin Arrangement of the Hitachi-UDI Port Connector.......................................................120 6.3 Differences between the MCUs and the Emulator............................................................125 6.4 The H8S/2378F E10A Emulator Functions ...........
Resumen del contenido incluido en la página 18
Figures Figure 1.1 System Configuration with the Emulator (PCMCIA Card Emulator Used) ............1 Figure 1.2 System Configuration with the Emulator (PCI Card Emulator Used) .....................2 Figure 2.1 Emulator Preparation Flow Chart.............................................................................7 Figure 2.2 Inserting the PCMCIA Card Emulator into the Host Computer...............................11 Figure 2.3 Inserting the PCI Card Emulator into the Host Computer....
Resumen del contenido incluido en la página 19
Figure 3.14 [Program] Window (Break Status).........................................................................36 Figure 3.15 [System Status] Window ........................................................................................37 Figure 3.16 [Breakpoints] Window ...........................................................................................39 Figure 3.17 [Open Memory Window] Dialog Box....................................................................40 Figure
Resumen del contenido incluido en la página 20
Figure 4.10 [Break condition 1] Dialog Box .............................................................................86 Figure 4.11 [condition] Page .....................................................................................................89 Figure 4.12 [Trace] Window .....................................................................................................92 Figure 4.13 [System Status] Window.......................................................................
