Manual de instrucciones de QSC Audio DD1-3

Resumen del contenido incluido en la página 1

DDI-3
DataPort Accessory Card
INSTALLATION GUIDE
*TD-000118-00*






DDI-3
*TD-000118-00*
Rev. A
1

Resumen del contenido incluido en la página 2

Instructions for the DDI-3 DataPort Accessory Card STBY I. INTRODUCTION VMN1 CGND IMN1 The DDI-3 DataPort Accessory Card converts a QSC amplifier’s DataPort to an eight-position terminal block, providing CH2+ CH2- convenient access to the pins of the amplifier’s DataPort; this is useful for connecting input signals or implementing a IMN2 AGND remote on/off (standby) system without using a DataPort cable. Four solder pads provide access to the amplifier’s output CH1+ VMN2 voltage and current moni

Resumen del contenido incluido en la página 3

III. WARRANTY AND DISCLAIMERS QSC Audio Products, Inc. is not liable for any damage to speakers, amplifiers, or any other equipment that is caused by negligence or improper installation and/or use of the DDI-3 DataPort Accessory Card. PRODUCT WARRANTY QSC Audio Products, Inc. ("QSC") guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warra

Resumen del contenido incluido en la página 4

QSC Audio Products, Inc., 1675 MacArthur Boulevard Costa Mesa, California 92626 USA PH: (714) 754-6175 FAX: (714) 754-6174 QSControl2 is a trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office. 4