Resumen del contenido incluido en la página 1
HOTWIRE 8540 AND
8546 RADSL CARDS
USER’S GUIDE
Document No. 8000-A2-GB20-50
April 2000
Resumen del contenido incluido en la página 2
Copyright 2000 Paradyne Corporation. All rights reserved. Printed in U.S.A. Notice This publication is protected by federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Paradyne Corporation, 8545 126th Avenue
Resumen del contenido incluido en la página 3
Contents About This Guide Document Purpose and Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . v Document Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Product-Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi 1 Hotwire DSL System Description What is the Hotwire DSL System? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Hotwire DSL Chassis .
Resumen del contenido incluido en la página 4
Contents 3 RADSL Card Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Port Naming Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Configuring the MCC Card, DSL Cards, and RTUs . . . . . . . . . . . . . . . . . . 3-2 DSL Configuration Card Status Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 DSL Configuration Ports Screens . . . .
Resumen del contenido incluido en la página 5
Contents A Download Code Download Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Fully Operational System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Scenario Two: Download Only System . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Apply Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 B SNMP Traps Setting Up SNMP Trap Features
Resumen del contenido incluido en la página 6
Contents This page intentionally left blank. iv April 2000 8000-A2-GB20-50
Resumen del contenido incluido en la página 7
About This Guide Document Purpose and Intended Audience This guide describes how to configure and operate the software component of the Hotwire Digital Subscriber Line Access Multiplexer (DSLAM) system. Specifically, this document addresses the use of the following cards in the DSLAM: 8540 Rate Adaptive Digital Subscriber Line (RADSL) card. 8546 Rate Adaptive Digital Subscriber Line (RADSL) card. This document is intended for administrators and operators who maintain the networks that suppor
Resumen del contenido incluido en la página 8
About This Guide Document Summary Section Description Chapter 1 Hotwire DSL System Description. Provides an overview of the Hotwire DSLAM and GranDSLAM systems. Chapter 2 Hotwire Menus and Screens. Describes the operation of Hotwire menus, screens, and commonly used navigation keys. Also provides instructions on how to log in and log out of the system. Chapter 3 RADSL Card Configuration. Describes the optional procedures for configuring the DSL cards on the Hotwire system. Chapter 4 Monitoring t
Resumen del contenido incluido en la página 9
About This Guide Document Number Document Title 7700-A2-GB23 OpenLane DCE Manager for HP OpenView for Windows User’s Guide 7800-A2-GB26 OpenLane DCE Manager User’s Guide 7800-A2-GB28 OpenLane Performance Wizard User’s Guide 8000-A2-GB21 Hotwire 8540 and 8546 RADSL Cards Network Configuration Guide 8000-A2-GB25 Hotwire 8100/8200 Interworking Packet Concentrator (IPC) Network Configuration Guide 8000-A2-GB29 Hotwire Management Communications Controller (MCC) Card User’s Guide 8000-A2-GB90 Hotwire
Resumen del contenido incluido en la página 10
About This Guide This page intentionally left blank. viii April 2000 8000-A2-GB20-50
Resumen del contenido incluido en la página 11
Hotwire DSL System Description 1 What is the Hotwire DSL System? The Hotwire Digital Subscriber Line (DSL) system is a set of central site products that terminate and consolidate packet data traffic from many customers in a serving area. The DSL card(s) then forwards the traffic to one or more network access provider networks. High-speed Internet and intranet access is bridged on the DSL port cards and multiplexed over backbone networks. By enabling very high speeds using DSL technology and con
Resumen del contenido incluido en la página 12
Hotwire DSL System Description The following illustration shows a typical Hotwire configuration. Central Office (CO) Customer Premises (CP) Network Hotwire Data Service IPC Interface Provider Ethernet DSL SN CARD POTS/DSL MDF DSLAM CO POTS Voice POTS Interface Splitter CP POTS Splitter Switched Network Optional Optional Legend: DSL – Digital Subscriber Line IPC – Interworking Packet Concentrator MDF – Main Distribution Frame POTS – Plain Old Telephone Service SN – Service Node 99-15674-03 The DS
Resumen del contenido incluido en la página 13
Hotwire DSL System Description Hotwire DSL Chassis There are four types of chassis: The Hotwire 8600 DSLAM chassis is an independent, standalone system. The stackable design provides for up to six chassis to share management access through a single MCC card, which in turn, allows an additional slot for a DSL card in each of up to five additional chassis. For more information, see the Hotwire 8600 Digital Subscriber Line Access Multiplexer (DSLAM) Installation Guide. 3 2 48V RTN AB A B ESD 1 DC
Resumen del contenido incluido en la página 14
Hotwire DSL System Description The Hotwire 8800 DSLAM chassis is a 20-slot chassis designed to house up to 18 4-port DSL cards and one MCC card. (The remaining slot is reserved for the future use of a redundant MCC card.) For more information, see the Hotwire 8800 Digital Subscriber Line Access Multiplexer (DSLAM) Installation Guide. The Hotwire 8810 DSLAM chassis is a higher density carrier, for use with future high-density port cards, as well as lower density cards (4 ports or less). This
Resumen del contenido incluido en la página 15
SYSTEM OK Alm Test ETHERNET TX RX Coll DSL PORT 1 2 3 4 SYSTEM OK Alm Test ETHERNET TX RX Coll POWER ALARMS A B Fan Major Minor CLOCK SERIAL AC LAN/WAN SLOT A MCC ALARM 2 4 6 8 A 10 12 14 16 18 B SERIAL ALARM 1 35 7 9 B 11 13 15 17 CLOCK SMCM POWER ENTRY MODULE POWER ENTRY MODULE LEFT UNIT: LINE A LEFT UNIT: LINE A RIGHT UNIT: LINE B RIGHT UNIT: LINE B WARNING! POWER MUST BE DISCONNECTED AT THE SOURCE WARNING! POWER MUST BE DISCONNECTED AT THE SOURCE BEFORE REMOVING OR INSTALLING THIS PWR ENTRY
Resumen del contenido incluido en la página 16
Hotwire DSL System Description MCC Card The DSLAM and GranDSLAM chassis require one MCC card, which is a processor card that administers and provides management connectivity to the DSL cards. It acts as a mid-level manager and works in conjunction with a Simple Network Management Protocol (SNMP) system, such as Paradyne’s OpenLane DCE Manager for HP OpenView, via its LAN port. It gathers operational status for each of the DSL cards and responds to the SNMP requests. It also has a serial port fo
Resumen del contenido incluido en la página 17
Hotwire DSL System Description Features The Hotwire DSL system provides the following features: High-speed Internet or intranet access. Rate Adaptive Digital Subscriber Line ports. Subscriber authentication, security access, and permission features that prevent users from accessing unauthorized services. Status polling, alarm indicators and logging, diagnostics, and performance capabilities. Primary network management support via SNMP agent for monitoring and traps; Telnet for configur
Resumen del contenido incluido en la página 18
Hotwire DSL System Description Configuring the DSL Cards The Hotwire DSL software provides DSL configuration options to: Configure the DSL cards and RTU connectivity Configure the interfaces and ports Set up user accounts Upload or download a copy of a card’s configuration data to or from a Trivial File Transfer Protocol (TFTP) server Download a new version of the DSL and RTU software Define an IP routing table Define and enable filters to prevent unauthorized network access Conf
Resumen del contenido incluido en la página 19
Hotwire DSL System Description Troubleshooting and Diagnostics The Hotwire DSL system provides DSL diagnostic submenu options that: Perform PING tests and display results Perform a BERT test Display selftest results for CPU, memories, and ports Show major alarms such as Selftest Failure, Processor Failure, and DSL or Ethernet port failure Show minor alarms such as Config Error and thresholds exceeded for DSL Margin and Error Rate or Link Down events Perform a trace route to an IP add
Resumen del contenido incluido en la página 20
Hotwire DSL System Description April 2000 1-10 8000-A2-GB20-50
