Resumen del contenido incluido en la página 1
Start Here > > >
H500
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - CHARGE
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND USE
Resumen del contenido incluido en la página 2
BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H500 Handsfree Headset. Volume Earhook Buttons Call Button Blue Indicator Light Microphone
Resumen del contenido incluido en la página 3
CHARGE 1 Your Headset's Battery Charge your headset's battery for 2 hours: Plug the Motorola charger into the end of 1 the headset. The blue indicator light turns on when the battery is charging. It may take up to 1 minute for the light to turn on. When the headset's battery is fully charged (about 2 hours), the blue indicator light turns off. Unplug the charger from the headset. 2 Note: Headset is not functional while charging.
Resumen del contenido incluido en la página 4
START BLUETOOTH 2 Feature On Your Phone Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. For most Motorola phones: M Select (Menu) > Settings > Connection > 1 Bluetooth Link > Setup. 2 Scroll to Power. 3 Press Change. Scroll to On. 4 Press Select to turn on the Bluetooth 5 feature. Bluetooth feature remains on until you turn it off. Note: These steps are for most Motorola phones. For other phones, see your phone's us
Resumen del contenido incluido en la página 5
TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature
Resumen del contenido incluido en la página 6
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809494A56-C MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by
Resumen del contenido incluido en la página 7
PAIR 3 Your Headset Step A - PUT HEADSET IN PAIRING MODE Before you can use your headset, you must pair (link) it with your phone. Call Button Blue Indicator Light With the headset power off, press and hold 1 the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not 2 remain steadily lit, turn off the headset and repeat step 1. Note: To turn off h
Resumen del contenido incluido en la página 8
PAIR Your Phone Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: Select ( M Menu) > Settings > Connection > 1 Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. 2 Select Motorola H500. Press OK or Yes to pair (link) the handsfree 3 device. 4 Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from
Resumen del contenido incluido en la página 9
TEST AND USE 4 Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: Place the headset over your ear. See 1 "Wearing the Headset" on the reverse side of this guide. On your phone, dial the number you want 2 to call and press the Send key. If your phone and headset are successfully 3 paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat thes
Resumen del contenido incluido en la página 10
USING YOUR H500 See Features and Functions Guide on the reverse side of this guide for information on using your H500.
Resumen del contenido incluido en la página 11
Features and Functions Guide H500 Bluetooth® Handsfree Headset IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H500.
Resumen del contenido incluido en la página 12
TURNING HEADSET ON/OFF To turn your headset on, press and hold the Call button until the indicator light flashes. Then, release the button. Note: Headset may take up to 4 to 5 seconds to turn on. To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off. Call Button
Resumen del contenido incluido en la página 13
WEARING THE HEADSET Open the earhook. 1 Loop the earhook over your ear. 2 Press the headset to your ear. 3 3 4
Resumen del contenido incluido en la página 14
CHANGING FOR USE ON OTHER EAR You can wear your H500 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: Open the earhook 90 040059o 1 degrees from the headset. 1 Open Earhook 2 Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to 2 Pull Earhook Up remove it. Flip the headset over. 3 4 Hook the bottom of the Hinge Pin earhook onto the lower hinge pin, then lift and pull the top of
Resumen del contenido incluido en la página 15
CHANGING VOLUME BUTTON ORIENTATION If you change your headset to wear on the other ear, you can also change the orientation of the volume buttons. Turn the headset power off. 1 Press the Call button and the volume 2 button you want to assign as the "volume up" button until the indicator light flashes twice. The headset power turns on. Volume Buttons Call Button
Resumen del contenido incluido en la página 16
European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: � The essential requirements and other relevant provisions of Directive 1999/5/EC. � All other relevant EU Directives. Product 0168 Approval Number The above gives an example of a typical Product Approval Number. You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the prod
Resumen del contenido incluido en la página 17
MAKING CALLS Function Action Make a voice dial call Tap the Call button and speak the name after the tone End a call Tap the Call button Receive a call Tap the Call button Reject a call Press and hold the Call button until you hear a beep Redial last call Press and hold the Call button until you hear a beep Answer a second Press and hold the incoming call Call button (places first call on hold) Note: Your H500 supports both Handsfree and Headset Profiles. Accessing call functions depends upo
Resumen del contenido incluido en la página 18
MAKING CALLS CONTINUED Function Action Toggle between two Press and hold active calls the Call button Join a 3-way call Press and hold both Volume buttons Put an active call on Press and hold the hold or resume a call Call button until you on hold hear a beep Disable or enable the Press and hold indicator light both Volume buttons for 3 to 4 seconds Mute or unmute a call Tap both Volume buttons Note: Some features are phone/network dependent.
Resumen del contenido incluido en la página 19
INDICATOR LIGHTS The indicator light provides information about your headset status. With the Charger Plugged In Headset Indicator Headset Status On (steady) Charging Off Charging complete With No Charger Plugged In Headset Indicator Headset Status Off Power off On (steady) Pairing mode 10 rapid flashes Pairing successful Slow pulse Connected (on a call) Quick flash Standby (not on call) Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains i
Resumen del contenido incluido en la página 20
AUDIO TONES The audio tones provide information about your headset status. Audio Tone Headset Status Single high tone when Volume at minimum pressing volume button or maximum Five rapid high tones Low battery repeated every 60 sec. No audio indications; Out of range deteriorating quality Ring tone Incoming call Single high tone Pairing confirmation Single low tone Voice activation Dual high/low tone Voice tag not recognized Single high tone End call Low to high tone Phone network not available
