Resumen del contenido incluido en la página 1
Network Function Edition
(PT-LB10NTU)
Resumen del contenido incluido en la página 2
Contents (Network Function Edition) Channels that can be used ................6 Notes on Using the Wireless Card ..........................4 Examples of Network Function Usage .......................7 Wireless Manager ME (Mobile Edition) ..........9 Software Installation ...............8 Wireless LAN Driver..........................10 System requirements..........................8 Inserting and Removing the Wireless Card to and from the Projector .........13 Inserting and Removing the Wireless
Resumen del contenido incluido en la página 3
Contents (Network Function Edition) (cont.) Changing the user settings..............31 Other Applications Projector operations .........................31 (Changing the Initial Settings).....28 Computer operations........................31 Changing the network number ........28 Computer settings ............................32 Projector operations .........................28 TCP/IP settings ................................32 Computer operations........................28 Settings for optional wir
Resumen del contenido incluido en la página 4
Notes on Using the Wireless Card The optional wireless card (ET-CDWL3U or ET-CDWL2U) uses radio waves in the 2.4 GHz band. A radio station license is not required when using this wireless card, but be sure to read and fully understand the following items before use. Do not use near other wireless equipment. The following equipment may use radio waves in the same band as the wireless card. When the wireless card is used near these devices, radio wave interference may make communication impossi
Resumen del contenido incluido en la página 5
Notes on Using the Wireless Card (cont.) If at all possible, avoid the use of cellular phones, TV sets or radios near the wireless card. Cellular phones, TV sets, radios and similar devices use different radio bands from the wireless card, so there is no effect on wireless card communication or the transmission and reception of these devices. However, radio waves from the wireless card may produce audio or video noise. The wireless card radio waves cannot penetrate steel reinforcements, meta
Resumen del contenido incluido en la página 6
Notes on Using the Wireless Card (cont.) Channels that can be used The channels (frequency range) that can be used differ according to the country or region where the wireless card is used. Refer to the table below. When using the ET-CDWL3U card (See page 43 for details on using the ET-CDWL2U card) Last two digits Channels Frequency band Country or region Standard of the card product used (Center frequency) number ARIB 2,412 MHz - Japan STD33 27 1 - 13 2,472 MHz & T66 United States FCC part 15
Resumen del contenido incluido en la página 7
Examples of Network Function Usage Projecting a computer image by wireless Software Installation (See page 8) operation Installation Simple wireless Wireless Manager ME connection Wireless LAN Driver (See page 15) Transmission Supplied wireless Optional wireless card Computer card installed here Projector Controlling the projector by WebBrowser Control Simple wireless connection (See page 15) Control by WebBrowser Using WebBrowser Control Control (See page 38) Optional wireless card Computer S
Resumen del contenido incluido en la página 8
Software Installation System requirements The computer must meet the following requirements in order to use the supplied software. OS: Windows XP/2000/Me (Millennium Edition)/98SE (Second Edition) CPU: Pentium III or faster or compatible processor (Celeron 633 MHz or faster is recommended. However, 800 MHz or faster is recommended when using live mode.) RAM: 64 MB or more (128 MB or more for Windows XP/2000) Empty hard disk capacity: 44 MB or more Hardware conditions: CD-ROM drive (for softwar
Resumen del contenido incluido en la página 9
Software Installation (cont.) Wireless Manager ME (Mobile Edition) Wireless Manager ME: This software is used to send screen images from a computer to the projector via a wireless LAN. Notes: • Shut down all software currently active on Windows. Otherwise, installation may not be possible. • Administrator authority is required for installation with Windows XP/2000. Set the supplied CD-ROM in the CD-ROM drive. 1 The installer starts up automatically and the following screen appears. Note: If the
Resumen del contenido incluido en la página 10
Software Installation (cont.) Wireless LAN Driver The Wireless LAN Driver must be installed in order to use the wireless card with a computer. • Described below is an example of installing the driver when using the ET-CDWL3U card. (See page 44 for details when using the ET-CDWL2U card) • When installing the driver while using a card other than the ET-CDWL3U or ET- CDWL2U, refer to the user’s manual for that card. • Some windows appear in English. Notes: • Be sure to install the Wireless LAN Dri
Resumen del contenido incluido en la página 11
Software Installation (cont.) Windows 2000/98SE/Me: Click [Wireless LAN Driver] at the 1 window appearing in step 1 on page 9. The wireless LAN installer starts up. Click [Next]. 2 The License Agreement appears. Designate the utility storage 3 destination, and click [Next]. The software is downloaded. Make sure that the [Yes, I want to 4 restart my computer now.] checkbox is checked, then click [Finish]. The computer reboots. Mount the optional wireless card 5 (ET-CDWL3U) into the CF card adapte
Resumen del contenido incluido en la página 12
Software Installation (cont.) Windows XP: Perform steps 1 to 4 of “Windows 2000/98SE/Me”, then perform the following operations. Mount the optional wireless card 5 (ET-CDWL3U) into the CF card adapter and insert it into the computer. (See page 14) The Found New Hardware Wizard starts up. Make sure that the [Install the 6 software automatically (Recommended)] checkbox is checked, then click [Next]. A logo text message appears. Click [Continue Anyway]. 7 The Wizard complete message appears. Click
Resumen del contenido incluido en la página 13
Inserting and Removing the Wireless Card to and from the Projector Insertion • Before inserting the wireless card, turn off the power and keep it off for the duration of the procedure. • Attempting to force in the wireless card facing the wrong direction may result in malfunction. Remove the card 1 lock screw. Hexagonal key wrench Card lock (supplied) Remove the card lock. 2 5 Insert the card until 1 3 it locks into place. Mount the card lock. 4 2 4 Secure the card 3 5 lock with the screw. Remo
Resumen del contenido incluido en la página 14
Inserting and Removing the Wireless Card to and from a Computer Insertion • Be sure to install the Wireless LAN Driver before inserting the card. (See page 10 or page 43) • The example given here describes the insertion of the ET-CDWL3U or ET- CDWL2U card. When using a different card, refer to the user’s manual for that card. • Be sure to also read the user’s manual for the computer. • Attempting to force in the wireless card facing the wrong direction may result in malfunction. Mount the card
Resumen del contenido incluido en la página 15
Simple Wireless Connection (Using the Initial Settings) When making a wireless connection between the projector and the computer using the default settings with the supplied wireless card and the optional wireless card (ET- CDWL3U or ET-CDWL2U), the IP address, communication mode and other necessary settings are made automatically when Wireless Manager ME is started up. However, note that Wireless Manager ME and the Wireless LAN Driver must be installed. For details on changing the initial setti
Resumen del contenido incluido en la página 16
Simple Wireless Connection (Using the Initial Settings) (cont.) Computer operations Insert the optional wireless card into the computer. 1 (See page 14) Turn on the computer. 2 → → → → Select [Start] [Programs] [Panasonic Wireless 3 → → Display] [Wireless Manager mobile edition]. • Wireless Manager ME starts up, and the connection select window shown below appears. Select the connection and click [OK]. 4 The launcher shown below appears and the connection with the projector is established. Note
Resumen del contenido incluido en la página 17
Simple Wireless Connection (Using the Initial Settings) (cont.) Canceling the connection with the projector Click [ ] on the launcher. 1 The following window appears. Click [Yes]. 2 The computer returns to the original network settings when the connection is ended. However, note that some time may be needed to return to the original network settings. 17
Resumen del contenido incluido en la página 18
Using Wireless Manager ME Startup → → → → Select [Start] [Programs] [Panasonic Wireless Display] → → [Wireless Manager mobile edition]. Description of the connection select window When the network number to be connected differs, select the network number to be connected. The network settings change according to this selection. This network number is stored in the computer, so connection is performed with the current number the next time Wireless Manager ME is started up. This indicates the numbe
Resumen del contenido incluido en la página 19
Using Wireless Manager ME (cont.) Description of the launcher and menu The launcher always appears on the computer screen, and can be used to perform various operations. Right-click [ ] on the task tray to display the menu. Cancel connection Status indication Place in task tray (Green): Transmission possible (Blue): Own computer currently transmitting (Yellow): Other user currently transmitting (Red): Communication impossible (Black): Unsupported projector selected Pointer mode on/off Live Mode:
Resumen del contenido incluido en la página 20
Using Wireless Manager ME (cont.) Live mode Check the status indication on the launcher to make 1 sure that transmission is possible (check that the green lamp is lighted). Click [ ] on the launcher. 2 The current computer screen is transmitted to the selected projector. In the live mode the projector is occupied by a single computer, so operations from other computers are not possible. Note: For presentations in full-screen live mode, the [ ] buttons on the remote control will function in the s
