Resumen del contenido incluido en la página 1
Studio Card
AW-PB301/PB305
Before attempting to connect or operate this product,
please read these instructions completely.
Resumen del contenido incluido en la página 2
For U.S.A NOTE: This equipment has been tested and found to com- ply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro- CAUTION vide reasonable protection against harmful interference RISK OF ELECTRIC SHOCK when the equipment is operated in a commercial environ- DO NOT OPEN ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cau
Resumen del contenido incluido en la página 3
CONTENTS PREFACE ................................................................................................................................................................................ 2 SPECIAL NOTES ON OPERATION ......................................................................................................................................... 2 PRECAUTIONS .............................................................................................................................
Resumen del contenido incluido en la página 4
PREFACE • When the studio card AW-PB301/AW-PB305 is • When the studio card AW-PB301 is installed in a installed in a convertible camera, for example, AW- convertible camera, for example, AW-E300, R/G/B E300, the electronic viewfinder (EVF) and intercom or Y/Pr/Pb component signals can be output. will be usable, making it possible to use the camera • When the studio card AW-PB305 is installed, only in studios. composite video signals and Y/C signals will be output. SPECIAL NOTES ON OPERATION • Po
Resumen del contenido incluido en la página 5
PRECAUTIONS • Ask a qualified service person for repairs when necessary. • Do not attempt to disassemble the camera, Remote Control Unit (RCU) or other units. In order to pre- vent electric shock, do not remove screws or cov- ers. There are no user-serviceable parts inside. • Do not let water, metal, or other foreign objects inside. This is important to prevent fire and electric shock. • If you see smoke or smell an odor from the product, if water or other foreign matter gets inside, if it is
Resumen del contenido incluido en la página 6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS q Viewfinder connector [EVF] Connect the cable for the viewfinder mounting bracket AW-Q40. EVF w Viewfinder standby switch [ST.BY/ON] When this switch is set to [ST.BY], the viewfinder will Viewfinder connector be in standby condition. The position ON, the picture is shown in the view- finder screen. ST.BY Viewfinder standby switch ON e Intercom volume control [LEVEL] LEVEL Used to adjust intercom volume level. Intercom volume control r Intercom conne
Resumen del contenido incluido en la página 7
MOUNTING CAUTION (1) Switch the camera off, and disconnect the power connector and other cables from the camera. • Be sure to ask your store, where you purchased the product, for mounting. (2) Loosen the four screws on the rear of the camera • Disconnect the camera power connector before and remove the rear panel. mounting. • Before handling the card, touch a metal part of (3) Loosen the two screws for the option card slot and the camera to discharge the static from the remove the cover. human b
Resumen del contenido incluido en la página 8
Panasonic Panasonic Rear Panel Option card slot cover Card setscrews (6 mm) Rear panel setscrews (8 mm) Studio card -6-
Resumen del contenido incluido en la página 9
Panasonic CONNECTING A STUDIO SYSTEM • To connect an RCU (WV-RC700A or WV-RC550) to the camera, use the RCU cable AW-CA50A26. • To mount the 5-inch electronic viewfinder WV-VF65C on the camera, use the viewfinder mounting bracket AW-Q40. • Power is supplied from the RCU. Push viewfinder Viewfinder mounting bracket AW-Q40 from behind 5" electronic viewfinder WV-VF65C Turn clamp knob Turn clamp knob to fasten camera. to fasten securely. RCU WV-RC700A To IF/REMOTE OUTPUT TALLY & INCOM GEN-LOCK IN
Resumen del contenido incluido en la página 10
l n MENU ITEM SETTING A convertible camera, for example, AW-E300, can be MAIN MENU SCREEN set using the menu as suited to the system and shoot- Main Menu of Halogen, ing conditions. For details, refer to the operation manu- Fluorescent, Outdoor Mode al for the camera. **Halogen Mode Set** Use Mode Brightness Set Color Set Blinking Setup Procedures (Output Signal G/L. Color Bar Set Sharpness Set Other Set Selection) Option Card Set Initialize Data (1) Display the main menu. Camera alone: K
Resumen del contenido incluido en la página 11
(2) The setting item (flashing) changes each time the CAMERA menu switch, item switch, or NO switch is pressed. Select [Option Card Set] and press the YES switch OPTION CARD VIDEO OUT to display the [Option Card Set] submenu. I/F REMOTE EVF MENU MENU Switchi“j G/L IN ITEM/AWC ITEM Switchi«j ST.BY (3) Select an item to set using the menu switch and ON YES/ABC LEVEL + YES Switchi{j IRIS NO/BAR item switch. – NO Switchi|j INCOM DC12V IN (4) Change the settings using the YES and NO switch- es. (5
Resumen del contenido incluido en la página 12
n Option Card Setting Submenu AW-PB301 AW-PB305 **Opation Card Set** **Opation Card Set** Zebra Indicator ON Zebra Indicator ON Zebra 1 Level 70% Zebra 1 Level 70% Zebra 2 Level 85% Zebra 2 Level 85% Safety Zone I Safety Zone I EVF Output Y EVF Output Y Component R/G/B Return Return q Zebra Indicator [Zebra Indicator: OFF/ON] The zebra indicator can be shown in two steps ON: Zebra indicator is sh
Resumen del contenido incluido en la página 13
t Component Output Select [Component Output: 12 3 R/G/B, Y/Pr/Pb, Y/C] (AW-PB301 only) Component output signals can be selected. Component output signals are output from the inter- face/remote connector on the rear of the camera. 45 Note: R/G/B output or Y/Pr/Pb output will be posi- tive in reproduced image regardless of the set- tings made with [Nega/Posi Set] on the [Other Settings] submenu of the main menu. The inner frame indicates a safety zone of about 90% and the outer frame, a safety zon
Resumen del contenido incluido en la página 14
APPEARANCE mm (inch) 96 (3-3/4) 21.5 (27/32) 5 (3/16) 91 (2-3/4) EVF ST.BY ON LEVEL INCOM -12- 70 (2-3/4)
Resumen del contenido incluido en la página 15
SPECIFICATIONS Video output: Y/C: Y: 1.0 V[p-p], C: 0.286 V[p-p] R/G/B: 0.7 V[p-p] (AW-PB301 only) Y/Pr/Pb: Y: 1.0 V[p-p], Pr/Pb: 0.7 V[p-p] (AW-PB301 only) SYNC: 2.0 V[p-p] sync signal (AW-PB301 only) VF output: 1.0 V[p-p], composite, high impedance Intercom jack: 3.5 mm in diameter Switch: Switching on the panel: EVF ST-BY/ON Switching on the menu: Zebra indicator ON/OFF, safety zone switching, EVF output switching, component output switching (AW-PB301 only) Adjusting functions: Intercom voi
Resumen del contenido incluido en la página 16
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 3F-5, Secaucus, NJ 07094 Regional Offices: EASTERN ZONE: 50 Meadowlands Parkway, Secaucus, NJ 07094 (201) 348-7620 CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200 SOUTHERN ZONE: Atlanta Region: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 Panazip 11 (770) 338-6841, fax (770) 338-6741 Law Enforcement Video Products: 1225
