Manual de instrucciones de Lindy 70586

Resumen del contenido incluido en la página 1

70586



PCI 32 bit P&P
2S (16C650 32FIFO)
1P (ECP/EPP 32FIFO)












www.lindy.com

Resumen del contenido incluido en la página 2

Description The 70586 32Bit PCI bus Plug & Play 2S/1P I/O card is equipped with two High-Speed RS-232.V24 Standard Serial Interfaces and one ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. The serial ports include 32 Byte FIFO with a speed up to 921Kb/Sec. 70586 has two 9 pin male connectors for attaching peripherals´ units with Serial RS-232 Standard Interface and one 25 pin female connector for peripherals' units with IEEE 1284 CENTRONICS Parallel Interface. Hardware Spe

Resumen del contenido incluido en la página 3

When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please change the PCI slot. After correct hardware installation you can start installing the software from the driver CD. u Pin Assignments Parallel 25 Pin female connector pin assignments: Parallel 25 Pin female connector : Pin Signal Pin Signal Pin Signal 1 STROBE 10 ACKNOWLEDGE 19 GROUND 2 DATA 0 11 BUSY 20 GROUND 3 DATA 1 12 PAPER EMPTY 21 GROUND 4 DATA 2 13 SELECT 22 GROUND 5 DATA 3

Resumen del contenido incluido en la página 4

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. ž PAGE − 4