Resumen del contenido incluido en la página 1
Installation Installation Guide
Wireless USB to VGA Kit
GUW2015VKIT
PART NO. M1062
1
Resumen del contenido incluido en la página 2
2 3
Resumen del contenido incluido en la página 3
Table of Contents System Requirements 4 Frequently Asked Questions 31 Important Information 5 Technical Specifications 34 Package Contents 6 Limited Warranty 36 Device Overview 7 Federal Communications Commission 37 (FCC) Statement Wireless USB Host Adapter 7 Contact 38 Wireless VGA Adapter 8 Appendix 39 Wireless VGA Software Installation 10 Compatibility with GUWH104KIT 39 Wireless VGA Display Settings 19 Cable Association 40 Wireless USB Manager 24 Wireless USB Host Adapter Settings 26 Wireles
Resumen del contenido incluido en la página 4
System Requirements ® - Microsoft Windows XP 32-bit (Service Pack 2) ® ® - Microsoft Windows Vista 32/64-bit - USB 2.0 Compliant hardware and system - Display with VGA port (VGA cable not included) 4 5
Resumen del contenido incluido en la página 5
Important Information Before you get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces. 4 5
Resumen del contenido incluido en la página 6
Package Contents 1 x Wireless USB Host Adapter (for PC) 1 x Wireless VGA Adapter (for Monitor/TV/Projector) 1 x USB 2.0 A to mini-B Cable (3 ft.) 1 x USB 2.0 Extension Cable (5 ft.) 1 x Velcro fabric hook-and-loop fastener 1 x Power Adapter 1 x Quick Start Guide 1 x Registration / Warranty Card 1 x Installation CD (with User Manual) 6 7
Resumen del contenido incluido en la página 7
Device Overview Wireless USB Host Adapter 1. LINK: Data Transfer Activity Indicator a. LED blinks when data is being transferred 1 2 2. PWR: Power a. LED is solid when powered by the PC 6 7 LINK PWR
Resumen del contenido incluido en la página 8
Wireless VGA Adapter 1 2 3 4 5 6 7 8 8 9
Resumen del contenido incluido en la página 9
1. VGA : VGA Activity Indicator 4. PWR plug a. LED is solid when display cable is connected a. Power adapter socket b. LED is blinking when data is being transferred 5. RESET a. Association history can be erased by pressing and 2. PWR: Power Indicator holding this button for 10 seconds a. LED is solid when power is applied 6. HOST 3. 1 – 2 – 3: Status Indicator a. This button is used to select a different Wireless USB Host Adapter a. Single* solid light: device is wirelessly connected to 7.
Resumen del contenido incluido en la página 10
Wireless VGA Software Installation IMPORTANT NOTE: If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed before installing the Wireless VGA kit software. Before installing the software, please make sure that the Wireless USB Host Adapter and Wireless VGA Adapter are not connected to the computer, and the Wireless VGA Adapter is not powered. Step 1 – Insert installation CD into drive on your computer. Step 2 - Select “Software Installation” from t
Resumen del contenido incluido en la página 11
If selecting Option 2: Download latest software If selecting Option 1: Install directly from CD, installer from the Web, a web browser window the installation will start automatically. will launch directing you to the IOGEAR website where you will find the most up-to-date software. Step 4 –If you previously installed the Once you download the software, double-click on GUWH104KIT software, then you will be prompted the .exe file to begin the installation process. to remove the software f
Resumen del contenido incluido en la página 12
Step 5 – For Windows XP users, if you do not have Microsoft .NET Framework 2.0 installed, you will be prompted to have it installed. 1. Click “Yes” to install .NET 2.0 Framework. 2. Check “License Agreement” and click “Install”. 3. Click “Finish” to complete installing .NET Framework 2.0. 4. Restart the computer when prompted. 5. Eject your CD and go to Step 1. Step 6 - Wireless VGA kit software installation procedures. 1. Make sure the Wireless USB Host Adapter is NOT connected to PC, and
Resumen del contenido incluido en la página 13
Step 7 - Driver Installation for Wireless USB Host Adapter. A. Make sure the antenna is connected to the Wireless USB Host Adapter. B. Plug the Wireless USB Host Adapter to your computer via option 1 or 2. Windows will detect the device and complete the driver installation process automatically. Option 1: Plug the Wireless USB Host Adapter into any available USB 2.0 port on your computer. 12 13
Resumen del contenido incluido en la página 14
Option 2: If using with a Desktop PC, plug the Wireless USB Host Adapter into an available USB 2.0 port utilizing the provided extension cable. Place the extension cable on a fl at surface, preferably the top of the desk/work area in order to ensure a good line-of-sight signal with the Wireless VGA Adapter. 14 15 LINK PWR
Resumen del contenido incluido en la página 15
Step 8 - Driver Installation for Wireless VGA adapter • For LCD Monitor / Flat-Panel TV A. Make sure the antenna is connected to the Wireless VGA adapter. B. Connect one end of the VGA cable (not in- cluded) to the Wireless VGA Adapter, and the other end to your display’s blue VGA port. 14 15
Resumen del contenido incluido en la página 16
• For Projector 16 17
Resumen del contenido incluido en la página 17
C. Plug the power cable into the Wireless VGA adapter. Make sure the Power Indicator LED is solid. 16 17
Resumen del contenido incluido en la página 18
Windows will automatically install the appropriate Wireless VGA Adapter drivers. Change your display’s setting to select VGA as your input device. Please refer to the operating instructions supplied with your display. ® You may use the included Velcro fabric hook- and-loop fastener to attach the Wireless VGA adapter to your projector or LCD display in order to ensure a good line-of-sight signal with the Wireless USB Host adapter. Congratulations, your Wireless VGA Kit is ready for use. 1
Resumen del contenido incluido en la página 19
Wireless VGA Display Settings To change the display settings, right click on the Monitor icon in the Windows system tray. A menu will appear and you will have the ability to change parameters such as resolution, color quality, mirror mode or extension mode and more. 18 19
Resumen del contenido incluido en la página 20
Video Mode Configuration as shown above, another is to go to Control Panel, double click on “Display”, then choose By default, your installation will be set with the “Settings” tab. best resolution for your computer and will extend your screen to the right. You may change the Mirror Mode screen mode and the operation mode. Mirror mode duplicates the primary display to the Note: If no output is seen on the monitor monitor connected to the Wireless VGA Adapter. connected to the Wireless VG
