Manual de instrucciones de IOGear DVI Net ShareStation GDIP201

Resumen del contenido incluido en la página 1

Installation IInstallation nstallation Guide
DVI Net ShareStation
GDIP201
1
PART NO. M1048

Resumen del contenido incluido en la página 2

2

Resumen del contenido incluido en la página 3

Table of Contents Package Contents 4 GDIP201 Confi guration - Vista 48 Hardware Installation 5 Connect to DVI Net ShareStation – Vista 52 USB Server software installation - XP 10 Video Mode confi guration - Vista 54 DisplayLink software installation XP 14 Disconnect the GDIP201 in - Vista 59 GDIP201 Full Software Installation - XP 18 Setting Polling Interval - XP 60 Windows XP utility Setup 21 Web Management Interface 61 Connecting to a DVI Monitor - XP 25 Upload Firmware 64 Video Mode confi gurati

Resumen del contenido incluido en la página 4

Package Contents Verify that nothing is missing from the package by using the checklist below. Please contact your dealer if anything is missing or damaged. All packing materials are recyclable. Please confi rm the items in the package below: 1 x DVI Net ShareStation 1 x RJ45 Ethernet Cable 1 x USB Cable 1 x User Manual 1 x Installation CD 1 x Warranty/Registration Card 1 x Power Adapter 1 x US-Euro Prong Changer 1 x DVI to VGA Adapter 4

Resumen del contenido incluido en la página 5

Hardware Installation *Make sure that your DVI monitor is powered off and that the server’s power adapter is disconnected before the installation. 1. Connect the DVI Net ShareStation to your router or switch with the included RJ45 Ethernet cable. 5

Resumen del contenido incluido en la página 6

If your home or offi ce already has a pre-installed network, you may connect the DVI Net ShareStation to the RJ45 jack on the wall with the included RJ45 Ethernet cable. 6 DSL MODEM

Resumen del contenido incluido en la página 7

2. Connect the DVI cable of the DVI monitor to the DVI port on the DVI Net ShareStation. 7

Resumen del contenido incluido en la página 8

3. Connect the power adapter to the DVI Net ShareStation and make sure it is powered on. When the Link indicator lights up, the DVI Net ShareStation is correctly connected to the network. 8

Resumen del contenido incluido en la página 9

Before you start the software installation, If this is the fi rst time you are installing the GDIP201 software please proceed to page 18 If you had purchased the IOGEAR GUC2020D and installed DisplayLink software, then you will only need to install the IOGEAR USB Server software. • Please see page 10 for Windows XP installation. • Please see page 35 for Windows Vista installation. If you had purchased the IOGEAR GUIP201 and installed the IOGEAR USB Server software installed, then you wil

Resumen del contenido incluido en la página 10

USB Server Software Installation - XP 1. Insert the GDIP201 installation disk into the CD-ROM drive, which will bring up the auto run screen menu. Click the Exit button to close the auto run screen. 10

Resumen del contenido incluido en la página 11

2. Go to My Computer which can be located by 3. Right click on the CD-ROM drive and select double clicking on the My Computer icon on Explore. your desktop. 11

Resumen del contenido incluido en la página 12

4. Double click on the folder that corresponds Double click on the setup icon to install the to your operating system. IOGEAR utility. 12

Resumen del contenido incluido en la página 13

5. The installation wizard will start the 6. When the installation completes, click installation process, click “Next” to “Finish” to close the installation wizard. continue. 13

Resumen del contenido incluido en la página 14

DisplayLink- software installation XP 1. Insert the GDIP201 installation disk which will 2. Go to My Computer which can be located by bring up the auto run screen menu. double clicking on the My Computer icon on your desktop. Click the Exit button to close the auto run screen. 14

Resumen del contenido incluido en la página 15

3. Right click on the CD-ROM drive and select 4. Double click on the DL_Driver folder Explore. 15

Resumen del contenido incluido en la página 16

5. To start the DisplayLink software installation 6. The installation program will start, click you will need to double click on the Setup I Accept to continue icon. 16

Resumen del contenido incluido en la página 17

7. The DisplayLink software is now installing 17

Resumen del contenido incluido en la página 18

GDIP201 Full Software Installation - XP This section will guide you through the 2. The installation wizard will start the complete GDIP201 software installation. installation process, click “Next” to continue. 1. Insert the Software CD into your computer. A splash screen should appear with a menu of options. Click on “Windows XP installation” to set up the DVI Net ShareStation’s control center software. 18

Resumen del contenido incluido en la página 19

3. When the installation completes, click “Finish” to close the installation wizard 19

Resumen del contenido incluido en la página 20

DisplayLink installation 4. To start the DisplayLink installation, click 5. The DisplayLink software is now installing I Accept to continue 20