Resumen del contenido incluido en la página 1
®
Bluetooth EZ-Extender
Manual
Revision 1.0, October 2009
Part Number
82-000218-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106
a
Resumen del contenido incluido en la página 2
Copyright Information © 2009 Analog Devices, Inc., ALL RIGHTS RESERVED. This docu- ment may not be reproduced in any form without prior, express written consent from Analog Devices, Inc. Printed in the USA. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use; nor for any infringement of patents or othe
Resumen del contenido incluido en la página 3
Regulatory Compliance The Bluetooth EZ-Extender is designed to be used solely in a laboratory environment. The board is not intended for use as a consumer end prod- uct or as a portion of a consumer end product. The board is an open system design, which does not include a shielded enclosure and therefore may cause interference to other electrical devices in close proximity. This board should not be used in or near any medical equipment or RF devices. The Bluetooth EZ-Extender is currently b
Resumen del contenido incluido en la página 4
Resumen del contenido incluido en la página 5
CONTENTS PREFACE Product Overview ............................................................................ x Purpose of This Manual .................................................................. xi Intended Audience .......................................................................... xi Manual Contents ............................................................................ xi What’s New in This Manual ........................................................... xii Technical or
Resumen del contenido incluido en la página 6
CONTENTS UART Interface ............................................................................ 1-4 Bluetooth Module ........................................................................ 1-5 USB Interface ............................................................................... 1-5 Expansion Interface ...................................................................... 1-6 Example Programs ........................................................................ 1-6 BLUETOOTH EZ-E
Resumen del contenido incluido en la página 7
CONTENTS BLUETOOTH EZ-EXTENDER BILL OF MATERIALS BLUETOOTH EZ-EXTENDER SCHEMATIC Title Page .................................................................................... B-1 Module ........................................................................................ B-2 LS Connector .............................................................................. B-3 PPI Connector ............................................................................. B-4 INDEX Bluetooth EZ-Extender
Resumen del contenido incluido en la página 8
CONTENTS viii Bluetooth EZ-Extender Manual
Resumen del contenido incluido en la página 9
PREFACE ® Thank you for purchasing the Bluetooth EZ-Extender , Analog Devices, Inc. daughter board to a Blackfin evaluation system with the new expansion interface II (such as the ADSP-BF518F EZ-Board™) or the ® older STAMP interface (such as the ADSP-BF537 EZ-KIT Lite ). Blackfin processors are embedded processors that support a Media Instruction Set Computing (MISC) architecture. This architecture is the natural merging of RISC, media functions, and digital signal processing characterist
Resumen del contenido incluido en la página 10
Product Overview Product Overview The Bluetooth EZ-Extender is a separately sold daughter board that plugs onto an EZ-KIT Lite supporting the STAMP interface or an EZ-Board/EZ-Kit Lite supporting the expansion interface II connec- tor. The extender board isolates the low-level configuration and communication tasks of integrating Bluetooth and radio frequency (RF) wireless technologies in your Blackfin board designs. The board extends the capabilities of the Blackfin evaluation system by pr
Resumen del contenido incluido en la página 11
Preface All of the power necessary to operate the extender is derived from the mat- ing EZ-KIT Lite/EZ-Board. Before using any of the interfaces, follow the setup procedure in “Bluetooth EZ-Extender Setup” on page 1-4. Purpose of This Manual The Bluetooth EZ-Extender Manual describes operation and configuration of the extender board components. A schematic and a bill of materials are provided for reference. Intended Audience The primary audience for this manual is a programmer who is famili
Resumen del contenido incluido en la página 12
What’s New in This Manual � Appendix A, “Bluetooth EZ-Extender Bill Of Materials” on page A-1 Provides a list of components used to manufacture the board. � Appendix B, “Bluetooth EZ-Extender Schematic” on page B-1 Provides the resources to allow board-level debugging or to use as a reference guide. What’s New in This Manual This is the first revision of the Bluetooth EZ-Extender Manual. Technical or Customer Support You can reach Analog Devices, Inc. Customer Support in the following ways: �
Resumen del contenido incluido en la página 13
Preface � Contact your Analog Devices, Inc. local sales office or authorized distributor � Send questions by mail to: Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 USA Supported Products The Bluetooth EZ-Extender is designed as an extender board to the ADSP-BF518F and ADSP-BF526 EZ-Board evaluation systems. The extender also is compatible with the Blackfin evaluation systems featuring the STAMP interface, such as the ADSP-BF548 and ADSP-BF527 EZ-KIT Lites. Pr
Resumen del contenido incluido en la página 14
Product Information Analog Devices Web Site The Analog Devices Web site, www.analog.com, provides information about a broad range of products—analog integrated circuits, amplifiers, converters, and digital signal processors. To access a complete technical library for each processor family, go to http://www.analog.com/processors/technical_library. The manuals selection opens a list of current manuals related to the product as well as a link to the previous revisions of the manuals. When loca
Resumen del contenido incluido en la página 15
Preface Data sheets, which can be downloaded from the Analog Devices Web site, change rapidly, and therefore are not included on the technical library CD. Technical manuals change periodically. Check the Web site for the latest manual revisions and associated documentation errata. Related Documents For information on product related development software, see the follow- ing publications. Table 1. Related Processor Publications Title Description Processor Data Sheet General functional descri
Resumen del contenido incluido en la página 16
Notation Conventions Notation Conventions Text conventions used in this manual are identified and described as fol- lows. Additional conventions, which apply only to specific chapters, may appear throughout this document. Example Description {this | that} Alternative required items in syntax descriptions appear within curly brackets and separated by vertical bars; read the example as this or that. One or the other is required. [this | that] Optional items in syntax descriptions appear within
Resumen del contenido incluido en la página 17
1 USING BLUETOOTH EZ-EXTENDER This chapter describes the Bluetooth EZ-Extender’s package contents, configuration, installation procedure, and interfaces. The information is presented in the following order. � “Package Contents” on page 1-2 Describes the product’s package contents. � “Bluetooth EZ-Extender Default Configuration” on page 1-3 Describes the board’s default configuration. � “Bluetooth EZ-Extender Setup” on page 1-4 Provides the board’s setup procedure. � “Flash Memory Interface” o
Resumen del contenido incluido en la página 18
� “Expansion Interface” on page 1-6 Describes the board’s expansion interface. � “Example Programs” on page 1-6 Describes the example programs installed with the board’s software. For more information about the mating Blackfin processor, see documents referred to as “Related Documents”. Package Contents Your Bluetooth EZ-Extender package contains one item: the Bluetooth EZ-Extender board. If the board is missing, contact the vendor where you purchased your Bluetooth EZ-Extender or contact A
Resumen del contenido incluido en la página 19
Bluetooth EZ-Extender Default Configuration The EZ-Extender system contains ESD (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate on the human body and equipment and can discharge without detection. Permanent damage may occur on devices subjected to high-energy discharges. Proper ESD precau- tions are recommended to avoid performance degradation or loss of func- tionality. Store unused EZ-Extender boards in the protective shipping package. When removing
Resumen del contenido incluido en la página 20
Figure 1-1 shows the default jumper and switch settings, connector loca- tions, and LED used in installation. Confirm that your board is in the default configuration before using the board. Bluetooth EZ-Extender Setup It is important to set up all components of the system containing the Blue- tooth EZ-Extender and then apply power to the system. Power on your system after the Bluetooth EZ-Extender has been connected to the EZ-Board or EZ-KIT Lite. Do not install or remove the Bluetooth EZ-E
