Resumen del contenido incluido en la página 1
3COM Etherlink III 3C900-B
Ethernet Adapter
Installation Guide
Resumen del contenido incluido en la página 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility
Resumen del contenido incluido en la página 3
Contents Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 How to Forcibly Modify Resources Allocated to the 3COM EtherLink XL 3C900B PCI adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Connecting to a Novell NetWare 5.0 Server . . . . . . . . . . . . . . . . . . . . 4 Microsoft Windows 95 SR2.5 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
Connecting to a Microsoft Windows NT 4.0 Server. . . . . . . . . . . . . 14 Microsoft Windows 98 2nd edition Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting to a Novell NetWare 4.11 Server. . . . . . . . . . . . . . . . . . 15 Microsoft Windows 98 2nd edition Requirements . . . . . .
Resumen del contenido incluido en la página 5
Read This First 1 Read This First Before installing the network adapter: • If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS field to YES. • If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field to NO. nd • If your OS is Windows 98 2 edition, go into the BIOS setup and set PnP OS field to YES. • If your OS is Windows for Workgroup 3.11, go into the BIOS setup and set PnP OS field to NO. How to Forcibly Modify Resources Allocated to the 3COM EtherLink
Resumen del contenido incluido en la página 6
Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 SR2.5 2 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 95 Requirements SR2.5 Windows 95 SR2.5 Operating System 1.51 Driver Version El90xbc5.sys Driver File NetWare 5.0 Server Server OS Novell Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows 95. 4 Windows 95 will d
Resumen del contenido incluido en la página 7
Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 SR2.5 3 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 95 Requirements SR2.5 Windows 95 SR2.5 Operating System 1.51 Driver Version El90xbc5.sys Driver File Windows NT 4.0 Server Server OS Microsoft Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows 95. 4
Resumen del contenido incluido en la página 8
Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 4 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 Requirements SR2.5 Windows 95 SR2.5 Operating System 1.51 Driver Version El90xbc5.sys Driver File NetWare 4.11 Server Server OS Novell Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows 95. 4 Windows 95 wil
Resumen del contenido incluido en la página 9
Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 5 Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT Requirements 4.0 Workstation Windows NT 4.0 Workstation Operating System 3.40.40 Driver Version El90xnd4.sys Driver File Novell NetWare 5.0 Server Server OS Client v4.6 for Windows NT Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Powe
Resumen del contenido incluido en la página 10
Connecting to a Novell NetWare 5.0 Server Microsoft Windows NT 4.0 Workstation 13 At the “Network Services:” prompt, accept the default settings and click on “Next”. 14 Complete the network card installation by clicking on “Next”. 15 Type in the path to your Windows NT files and click “Continue”. 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrator can provide you with this information. 17 Accept the default entries at the
Resumen del contenido incluido en la página 11
Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 6 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT Requirements 4.0 Workstation Windows NT 4.0 Workstation Operating System 3.40.40 Driver Version El90xnd4.sys Driver File Windows NT 4.0 Server Server OS Microsoft Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the
Resumen del contenido incluido en la página 12
Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows NT 4.0 Workstation 12 Select all the applicable network protocols and click on “Next”. 13 At the “Network Services:” prompt, accept the default settings and click on “Next”. 14 Complete the network card installation by clicking on “Next”. 15 Type in the path to your Windows NT files and click “Continue”. 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrator can
Resumen del contenido incluido en la página 13
Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 7 Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT Requirements 4.0 Workstation Windows NT 4.0 Workstation Operating System 3.40.40 Driver Version El90xnd4.sys Driver File Novell NetWare 4.11 Server Server OS Client v4.6 for Windows NT Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 P
Resumen del contenido incluido en la página 14
Connecting to a Novell NetWare 4.11 Server Microsoft Windows NT 4.0 Workstation 13 At the “Network Services:” prompt, accept the default settings and click on “Next”. 14 Complete the network card installation by clicking on “Next”. 15 Type in the path to your Windows NT files and click “Continue”. 16 If TCPIP was one of the protocols selected, you will be prompted for some TCPIP information. Your Network Administrator can provide you with this information. 17 Accept the default entries at the
Resumen del contenido incluido en la página 15
Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 2nd edition 8 Connecting to a Novell NetWare 5.0 Server Microsoft Windows 98 Requirements nd 2 edition nd Windows 98 2 edition Operating System 3.41.50 Driver Version El90x.sys Driver File Novell NetWare 5.0 Server Server OS Client v3.1 for Windows 95/98 Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the m
Resumen del contenido incluido en la página 16
Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 2nd edition 9 Connecting to a Microsoft Windows NT 4.0 Server Microsoft Windows 98 Requirements nd 2 edition nd Windows 98 2 edition Operating System 3.41.50 Driver Version El90x.sys Driver File Windows NT 4.0 Server Server OS Microsoft Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and b
Resumen del contenido incluido en la página 17
Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 2nd edition 10 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 98 Requirements nd 2 edition nd Windows 98 2 edition Operating System 3.41.50 Driver Version El90x.sys Driver File Novell NetWare 4.11 Server Server OS Client v3.1 for Windows 95/98 Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on t
Resumen del contenido incluido en la página 18
Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 11 Connecting to a Windows NT 4.0 Server Microsoft Windows for Requirements Workgroups v3.11 Windows for Workgroups 3.11 Operating System 3.33 Driver Version El90x.386 Driver File Windows NT 4.0 Server Server OS Microsoft Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and start in
Resumen del contenido incluido en la página 19
Connecting to a Windows NT 4.0 Server Microsoft Windows for Workgroups v3.11 13 Click “OK” at the “Network Setup” dialog box. 14 If needed, enter changes to the “Microsoft Windows Network Names” dialog box and click “OK”. 15 Windows will prompt for the location of several files. Type the path to the file locations and click “OK”. This step will be repeated several times until all of the files Windows needs have been copied. 16 Click “OK” on the next dialog box indicating that the CONFIG.SYS,
Resumen del contenido incluido en la página 20
Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Workgroups v3.11 12 Connecting to a Novell NetWare 4.11 Server Microsoft Windows for Requirements Workgroups v3.11 Windows for Workgroups 3.11 Operating System 4.00 Driver Version 3c90x.com Driver File Novell NetWare 4.11 Server Server OS Client 2.71 for DOS and Win3.x Client OS Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter.
