Resumen del contenido incluido en la página 1
Wireless Outdoor
Client Bridge / Access Point
EOC5611P
User Manual
Version : 1.0
0
Resumen del contenido incluido en la página 2
Table of Contents 1 PRODUCT OVERVIEW ........................................................................................................................................................... 3 1.1 FEATURE ......................................................................................................................................................................... 3 1.2 BENEFITS .........................................................................................................
Resumen del contenido incluido en la página 3
5.1 SYSTEM → IP SETTINGS ................................................................................................................................................ 30 5.2 SYSTEM → SPANNING TREE SETTINGS .............................................................................................................................. 31 6 ROUTER SETTINGS .............................................................................................................................................
Resumen del contenido incluido en la página 4
1 Product Overview Thank you for using EOC5611P. It is a powerful, enhanced, enterprise scale product with 4+1 multi-functions Access Point, Access Point with WDS function, Client Bridge, WDS Bridge,and Client Router. EOC5611P is easily to install almost anywhere with Power over Ethernet for quick outdoor installation. External N-type antenna provides better wireless signal quality and the antenna is upgradeable. EOC5611P uses 5G band and 2.4G wireless signal to avoid interference of m
Resumen del contenido incluido en la página 5
rearrange the workplace. e) Wireless extensions to Ethernet networks Network managers in dynamic environments can minimize the overhead caused by moves, extensions to networks, and other changes with wireless LANs. f) Wired LAN backup Network managers implement wireless LANs to provide backup for mission-critical applications running on wired networks. g) Training/Educational facilities Training sites at corporations and students at universities use wireless connectivity to ease access
Resumen del contenido incluido en la página 6
1.2 Benefits Access Point Mode Use this feature to setup the access point’s configuration information. It has support adjusting transmit power and channel. Client can access the network with different regulatory settings and automatically change to the local regulations. Client Bridge Mode Use this feature to connect to an Access Point and enjoy the great speed of surfing internet. WDS Bridge Mode Use this feature to link multiple APs in a network. All clients associated with any APs c
Resumen del contenido incluido en la página 7
1.3 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, in case of return; the unit must be shipped in its original package. 1* Wireless Outdoor Access Point / Client Bridge (EOC5611P) 1* 24V/1A Power Adapter 1* Ethernet Cable 1* QIG 1* CD (User Manual) 2* 5dBi 5GHz Dipole Antennas Auction: Using other Power Adapter than the one included with EOC5611P may cause damage of the
Resumen del contenido incluido en la página 8
• Red: Bad Quality Power Requirements Active Ethernet (Power over Ethernet) Proprietary PoE design Power Adapter 24V / 1A DC Regulation Certifications FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC Certification 7
Resumen del contenido incluido en la página 9
2 EOC5611P Multi-Function Instruction Guide 2.1 Access Point In the Access Point Mode with WDS Function, EOC5611P function likes a central connection for any stations or clients that support IEEE 802.11a/b/g network. Stations and Client must configure the same SSID and Security Password to associate within the range. EOC5611P supports 4 different SSIDs to separate different clients at the same time. 2.2 Access Point with WDS Function EOC5611P also supports WDS function in Access
Resumen del contenido incluido en la página 10
2.3 Client Bridge In the Client Bridge Mode, the EOC5611P function likes a wireless dongle. Connected to an Access Point wirelessly and surf internet whenever you want. Using Site Survey to scan all the Access Point within the range and configure its SSID and Security Password to associate with it. Connect you station to the LAN port of the EOC5611P via Ethernet. 2.4 WDS Bridge In the WDS Bridge Mode, the EOC5611P can wirelessly connect different LANs by just simply configur
Resumen del contenido incluido en la página 11
frequency channel, more APs connected together may lower throughput. Please be aware to avoid loop connection, otherwise you may enable Spanning Tree Function. 2.5 Client Router In the Client Router Mode, the EOC5611P has DHCP Server build inside that allows many LANs automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode. 10
Resumen del contenido incluido en la página 12
3 Computer Settings 3.1 Assign a Static IP In order to configure EOC5611P, please follow the instruction below: 1. In the Control Panel, double click Network Connections and then double click on the connection of your Network Interface Card (NIC). You will then see the following screen. 2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your PC/Notebook 3. Select Use the following IP addr
Resumen del contenido incluido en la página 13
3.2 Logging Method After complete the IP settings from last section, you can now access the web-based configuration menu. 1. Open web browser 2. Enter IP 192.168.1.1 into you address filter. Auction: If you have changed the EOC5611P LAN IP address, make sure you enter the correct IP Address. 3. After connected to the EOC5611P successfully, browser will pop out a Windows Security window. Please enter the correct Username and Password. 4. The default Username and Passwor
Resumen del contenido incluido en la página 14
4 Wireless Settings 4.1 Switching Operation Mode (System → System Properties) The EOC5611P supports 4 different operation modes: Access Point, Client Bridge, WDS Bridge, and Client Router. Click System Properties under System Section to begin. . Device Name: Specify a name for the device, but it is not the broadcast SSID. It will be shown in SNMP management. Country/Region: Select a Country/Region to conform local regulation. Operation Mode: Select an operation mode via R
Resumen del contenido incluido en la página 15
Mode and then enable WDS Link Settings function. 4.2 Wireless Settings 4.2.1 Access Point Mode → Wireless Network Wireless Mode EOC5611P supports 802.11a/b/g wireless band. The channel availability is based on the country’s regulation. Channel / Frequency Auto Place a Check to enable Auto channel selection. AP Detection can help to select a best channel by scan nearby area. AP Detection Current Profile Configure up to four different SSIDs, it can help to divide group of clients to
Resumen del contenido incluido en la página 16
Auction: When you select 802.11a (5GHz) as your wireless mode, only the wireless client which supports 5GHz network can associate with. Please make sure your wireless client supports 5GHz wireless network. Note: Enable Profile Isolation will cause wireless clients cannot communicate each other. For more details please refer to the “VLAN Management Configuration Guide. SSID Specify the SSID for current profile. Specify the VLAN tag for current profile. VLAN ID Suppressed SSID Place a
Resumen del contenido incluido en la página 17
4.2.2 Client Bridge Mode → Wireless Network Wireless Mode EOC5611P supports 802.11a/b/g wireless band. Specify the SSID if known. SSID text box will be automatically fill in when select an AP SSID in the Site Survey. Site Survey Using Site Survey to scan nearby APs and then select the AP to establish the connection. Specify the MAC address if known. Prefer BSSID text box will be automatically fill in Prefer BSSID when select an AP in the Site Survey. WDS Client Place a Radio button t
Resumen del contenido incluido en la página 18
filled in manually. 4.2.3 WDS Bridge Mode → Wireless Network Wireless Mode EOC5611P supports 802.11a/b/g wireless band. The channel availability is based on the country’s regulation. Channel / Frequency Apply / Cancel Press Apply to apply the changes or Cancel to return previous settings. 17
Resumen del contenido incluido en la página 19
MAC Address Enter the Access Point’s MAC address that you would like to extend the wireless area into the MAC address filter. Select Disable or Enable from the drop down list. Mode Apply / Cancel Press Apply to apply the changes or Cancel to return previous settings. Auction: The Access Point that you would like to extend the wireless area must enter your Access Point’s MAC address. Not all Access Point supports this feature. More WDS bridges connected together may cause lower performan
Resumen del contenido incluido en la página 20
4.2.4 Client Router Mode → Wireless Network Wireless Mode EOC5611P supports 802.11a/b/g wireless band. Specify the SSID if known. SSID text box will be automatically fill in when select an AP SSID in the Site Survey. Site Survey Using Site Survey to scan nearby APs and then select the AP to establish the connection. Specify the MAC address if known. Prefer BSSID text box will be automatically fill in Prefer BSSID when select an AP in the Site Survey. WDS Client Place a Radio button t
