Manual de instrucciones de Encore electronic ENL832-TX-EN

Resumen del contenido incluido en la página 1

ENL832-TX-RE & ENL832-TX-RENT
ENL832-TX-EN & ENL832-TX-ICNT

10/100Mbps Fast Ethernet LAN Card
User's Guide


FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits of a Class B
computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed an

Resumen del contenido incluido en la página 2

Standard & Specification: * Standard: IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX * Transmission Rate: 10Mbps or 100Mbps * Hardware Required: IBM compatible PC with available PCI slot ( PCI 2.1 or PCI 2.2 ) * IRQ Line: Assigned by system * I/O Address : Assigned by system * Drivers: Novell NetWare, Windows NT/98/ME/2000/XP and other popular operating systems * Temperature : 0 to 55 C (Operating) * Humidity : 10% to 90% (Non-condensing) * Power consumption : 1.8W (Max.)

Resumen del contenido incluido en la página 3

Driver Installation: [For ENL832-TX-RE & ENL832_TX_RENT] 1. For Windows XP, Windows 2000 and Windows Me: a) When Windows boots up, operating system will detect the LAN card and Found New Hardware Wizard windows will appear. Click Cancel b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver: c) When OS finishes loading device driver, window below will appear. Click Ok to complete the installation:

Resumen del contenido incluido en la página 4

2. For Windows 98SE: a) When system boots up, operating system will automatically detect the LAN card and Add New Hardware Wizard window will appear, and then click Cancel: b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver to install device driver. 4

Resumen del contenido incluido en la página 5

c) When window below appears, click OK to restart the Windows. d) When Windows boots up again, Add New Hardware Wizard window will appear, then click Next to continue the LAN card installation. 5

Resumen del contenido incluido en la página 6

e) Select Search for the best driver for your device, then click Next to continue the installation. f) Select Specify a location then click Next to continue: 6

Resumen del contenido incluido en la página 7

g) Click Next to continue the installation: h) Click Next to load LAN card device driver: 7

Resumen del contenido incluido en la página 8

i) Insert the Windows 98/98se CD-ROM in the CD-ROM drive then enter the CD location and click OK to load file: j) Click Finish to complete file loading: k) Click Yes to restart the system, when system boots up again, you are ready to use the LAN card. 8

Resumen del contenido incluido en la página 9

[For ENL832-TX-EN & ENL832_TX_ICNT] 1. For Windows XP, Windows 2000, Windows ME: a) When Windows boots up, operating system will detect the LAN card and Found New Hardware Wizard windows will appear. Click Cancel: b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver: 9

Resumen del contenido incluido en la página 10

c) When OS finishes loading device driver, window below will appear. Click Ok to complete the installation: 2. For Windows 98SE a) When Windows boots up, operating system will detect LAN card and Add New Hardware Wizard window will appear. Click Cancel: 10

Resumen del contenido incluido en la página 11

b) Insert the Driver Installation CD into CD-ROM drive, window below will appear then click Install Driver: c) After OS finishes loading device driver, window below will appear then click OK to restart the system. d) After the system boots up, Please wait for a while to finish setting up the device. When operating system finishes loading LAN card files, window below will appear. Click Yes to reboot the system again. When your system boots up, you are ready to use t