Manual de instrucciones de Airlink101 Wireless Cardbus Adapter AWLC3028

Resumen del contenido incluido en la página 1

Rev. 1.2
Windows Vista Users: After turning on the computer, Windows will install its built
in driver for this card. A popup window will appear telling you that the driver was
installed correctly.
Quick Installation Guide
802.11g Wireless Cardbus Adapter
Model # AWLC3028
Once you see this message, insert the installation CD and continue to Step 1.
Step 1 The Autorun screen will pop up. Select Install Driver and Utility from the
menu.
Package Content:
• Wireless Cardbus Adapter
• Driver & Utilit

Resumen del contenido incluido en la página 2

Step 2 Click Next at the welcome screen. Windows Vista Users: When the Windows Security box appears, click Install this driver software anyway . Step 3 Click Finish to complete the installlation. Windows 2000/XP Users: Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt).

Resumen del contenido incluido en la página 3

To open the utility, double click on the Wireless Configuration Utility icon in the Section 2 system tray at the bottom right-hand corner of your screen. Configuring the Wireless Adapter Windows Vista Users: For instructios on using Windows Vista’s built in utility, please skip ahead. Windows XP Users: You must disable the Wireless Zero Configuration Utility. Please follow the steps below to disable XP’s wireless utility. Double-click on the Wireless Network Connection Icon in the system tray a

Resumen del contenido incluido en la página 4

If the network you are attempting to connect to does not have encryption enabled, Windows Vista Users: To connect to a network using the Windows Vista utility, you will recieve a warning about connecting to an unsecured network. Click OK right click on the networking icon down in the bottom right hand corner. to complete the connection. If the network you are attempting to connect to is configured for encryption, the following window will appear: Then click on Connect to a network. Select your

Resumen del contenido incluido en la página 5

You should now be connected to your network. Click Connect Anyway to connect to the network. To save the connection settings so that you don’t have to go through the connec- tion setup process each time you start your computer, check the boxes for Save If the network you are attempting to connect to has encryption enabled, a box will this network and Start this connection automatically, then click Close to appear asking you to enter your encryption key. complete the setup. Troubleshooting: If y

Resumen del contenido incluido en la página 6

For instructions on configuring and connecting to a router with Wi-Fi Protected Setup (WPS), Please refer to Section 4.7 of the User Manual Located on the CD. The adapter can only use Wi-Fi Protected Setup with routers that support Wi-Fi Protected Setup. Section 3 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Web Site: www.airlink101.com *Theoretical maximum wireless signal rate based on IEEE standard 802.11g specifications. Actual data throughput will vary. Network